Work In Progress / Sweatbox
Subforums
-
Showcase (56,340 visits to this link)
-
- 530
- posts
-
A:M Stills (84,726 visits to this link)
-
Works In Progress (WIP) (58,207 visits to this link)
-
- 3.1k
- posts
5,143 topics in this forum
-
- 2 followers
- 225 replies
- 69.8k views
Initial Test of staging for new project. Intention is to use 'House of cards' buildings with hand drawn animated characters living there. Not sure yet if the interiors will be 3Dcg and exteriors hand drawn, all up in the air. SimonHF 001.mov
Last reply by Simon Edmondson, -
- 4 followers
- 210 replies
- 96k views
Sorry I've been off of the radar of late. A few weeks ago I decided to light myself aflame with gasoline. Note: I DO NOT RECOMMEND THIS. The burns are not nearly as painful as the process of treating the burns. I have a new found respect for those burn center doctors/nurses/assistants and my sympathy for burn victims is tremendous. I am now well on the way to recovery... and the good news (for me)... I've found time to sketch with splines again and have been really enjoying that. I need to find my mouse because splining with a finger on a laptop is a royal pain. Tuckertown is a project (of sorts) meant to be a drawn comic strip set in the late 1800s. The cha…
Last reply by Rodney, -
Opening Three shots of current short. Any Feedback welcome. simon Why_S1.mov Why_S2.mov Why_S3.mov
Last reply by Simon Edmondson, -
Blockheads 1 2 3 4
- 190 replies
- 18.3k views
Ball_640.mov Trying to do a series of 10-20 seconds 'briefs', one each week. This is the first. I need to change the composite on the third scene. using a shadows only render ( if I can remember how ) as there is a unintended mix of toon and non toon renders. When rendering a cookie cut decal in toon, it shows on both sides, only the one side in Final ? Any feedback welcome. regards simon PS should have mentioned. this is a VGA conversion of a 1080 render.
Last reply by Simon Edmondson, -
- 189 replies
- 17.1k views
With a big thank you to Nancy and Rob for their help last week. Here is the opening scene for a (very ) short I'm developing. Any feedback is very welcome., as critical as you can. Theres no sound yet regards simonLightening.mov
Last reply by Simon Edmondson, -
- 1 follower
- 187 replies
- 9.5k views
Not technically a WIP just yet, but I wanted to start a placeholder thread. I'm going to have to put my "Nightcallers" work aside as it's the time of year when I have to start thinking about the company Christmas animation. I need to sketch out some ideas (I like to show three) and pitch them to my boss. Then it's off to the races. As long as it's creative and catchy, she's pretty flexible (see: the Christmas Snail) and likes me to have fun with it. This year I'm determined to center it on actual CHARACTER ANIMATION, yes I said it. So that's what I'll be pitching. Now I just need to come up with some ideas!
Last reply by ptiversen, -
Hi folks, I needed a character that I can compete with in animation competitions. So, I decided to build one with the goal of making it as universal as possible and, with David's help, will have the awesome rig used in TWO. I started with the head first. That's how I always start my drawings. Linguini, of Pixar's Ratatouille, is my inspiration. I'm following two DVD tutorials, relying heavily on Barry Zundel's (Bizzle) character modeling Disc 1, and augmnted with hints from William Sutton's Modeling a Gorilla tutorial. Your critiques and insights are most welcome.
Last reply by mtpeak2, -
- 1 follower
- 150 replies
- 11.3k views
hi there,i'm new at this forum. still a noob and wish to get help i'm modeling a pourche car in AM, and wish to share my current step with you, i tried to find a tut about car modeling for AM but didn't find any....if someone has comments, ideas, or suggestions i will be very happy...thanks
Last reply by Jin-Kazama, -
- 149 replies
- 10.8k views
I am trying to make a model of a viper srt but need a top view. I cant find a top view of the car any were. Could some one help me out and tell me were i can get one. If you can find or give me a top view of a viper srt i would be very greatfull. Hear is a pic of wat i got done on it so far.
Last reply by Dark_Jedi, -
- 1 follower
- 144 replies
- 21.8k views
All righty, I've been meaning to do this for sometime and am only now just getting around to it. As mentioned before, I am assisting with a project known as Star Trek: Red Squad. It's a 4 episode web series that is on its final episode. The basic premise is after the destruction of Romulus, Starfleet is training the cadets of Red Squad aboard the USS Enterprise (which is beginning to near the end of its tenure.) Suddenly, Red Squad is thrown into saving the quadrant from a mad man Romulan by the name of Deitrix, who is using wormhole technology to wipe out the Federation and all of its allies once and for all. Red Squad simply started as a test sequence of animat…
Last reply by Darkwing, -
Doug's Den 1 2 3
by Dpendleton77- 2 followers
- 144 replies
- 17.5k views
I am going to give this a new. I am trying to model a guitar among other things.
Last reply by Dpendleton77, -
rough dragon model 1 2 3
by Roger- 138 replies
- 10.8k views
OK Well, he's not exactly cute or endearing yet, I think the pupils are too tiny..... And I still have a few things to add. I think I will just give him paddle feet, or modify the hands and make feet out of those. I've made horns, I just didn't bother to put them on. I'll be putting some decals on him at some point, nothing too fancy just something to punch him up a bit. He'll still be clay shaded. One thing I am not entirely happy with is the snout....this one is true to my original sketches, I didn't want to have a beak or anything with teeth, like an alligator or t-rex. I guess I could give him like a little anteater mouth with a tou…
Last reply by robcat2075, -
- 2 followers
- 137 replies
- 9.6k views
Well I've had AM for 4 months and done too much goofing around. The ol' saying is writer's WRITE, so I guess animators ANIMATE! I've been so busy tweaking characters to be better than the previous version and worrying about rigging and things I can't do that it paralyzed me from doing much. So I decided to just rig something (since I have TSM2 anyway) and jump in and do something, so here's the start. I'm animating this as I go, but consider this version a kind of blocking, because I intend to go back and put in all the detail. Right now I want to get the short story down. It's been fun since it has been fairly quick to do to get it this far, maybe a few hours.…
Last reply by entity, -
- 131 replies
- 9.4k views
ok i think im gonna make the sig below 3d. but first i want to get the light to squirt through the windows. What light do i use to light it up through the windows? Comments/critiques are extremmly welcome. if you bothered reading this thread please post... im begging you NEWEST UPDATE
Last reply by Newbert_Zero, -
NIXUS 1 2 3
by Viper GTX2.0- 1 follower
- 129 replies
- 12.7k views
Im thinking to make this nixsus car but its bin a long time sins i used the rotorscopes and need help on setting it up.
Last reply by the_black_mage, -
- 2 followers
- 128 replies
- 12.7k views
Thanks for the help on face rigging! Now I'm running into some issues with cloth. I'm having to move the top spline of the cloth group WAY far off for the simulation to run. Problem is, it looks ridiculous when it's like that because the top spline doesn't actually simulate, it just sits there (which I assume is what it's supposed to do). (2nd image is normal, 1st image is "safe" area. When I have the spline moved way out there, it works just fine.) The "deflector" group is the legs. The cloth tutorial I've seen linked when I did a search is a broken .AVI link and a lengthy .pdf which is pretty hard to follow without the video (it looks to be just a word-fo…
Last reply by Phil, -
- 1 follower
- 125 replies
- 12.3k views
What could it be?
Last reply by robcat2075, -
Model of Venice 1 2 3
by Pitcher- 1 follower
- 125 replies
- 8.4k views
Some of my pigs from Donark are going to Venice to share donuts and recipes. I made a model where my pigs and the Venetians can interact. Unfortunately, it won't be a happy visit. I have attached a picture of my model. It's still in progress, and there will be some additions and tweaking. Among the changes will be creation of a population of Venetians and the arrival of a ship of Donark pigs. The pigs will have an adventure like they've never had before. (I also should note that this model is really Venice-y. It's not really a totally accurate depiction.)
Last reply by Pitcher, -
Political cartoon 1 2 3
by heyvern- 123 replies
- 8.7k views
Crappy quality. Low res WIP. Did it FAST! Comments... rants... raves... welcome. I can take it... I think. I am not an impersonator. That is the best John McCain I can do. And Cindy sounds like an wealthy chipmunk on heroin. themccains.wmv -vern
Last reply by robcat2075, -
I had to put aside the project of "Trem do Pantanal" because it is a big project that requires more labor (modeler, animator etc etc). Meanwhile I began a more modest project, a short film called "Lau". I present you, "Lau" the main character which gives the name of the short. The rendering style is the same image below. There will be 4 characters: Lau Baby Lau character 1 dog I'll concentrate all my efforts to complete this project later this year. And follow the schedule: Concept Modeling Texture Rig Storyboard Animatic Animation Render Post production (sound effects, music, cuts etc etc) I believe it will have around 2 minut…
Last reply by Rodney, -
- 117 replies
- 13.9k views
Hi all, Haven't shown anything really new in a while, so here's a peak at my newest character, to go along with the elegant lady and gentleman I did a while back. He's sort of the head of the investigation agency. At least, that's how I see him now. And I think he says "Jolly good" a lot, too. I need to give him some thin hair on his head. Jim
Last reply by heyvern, -
- 114 replies
- 10.9k views
Homepage for Ballet Pour Ma Fille: AppleSnake Original discussion thread: http://www.hash.com/forums/index.php?showtopic=2288 -- Ok, the title to the old thread just sucked- can't figure out how to edit titles... so, new thread. Anyway, here's a simple little Fouette-type turn by RG, who is the dancer in the film. Animating ballet is very hard, I've discovered. It is not made easier when the proportions of your character are... not anything like a real ballerina. This took three days to get to this point, and I need to move on- though I'm not satisfied. Need to tone down her head a bit when it moves forward, and I may make her poses a little st…
Last reply by robcat2075, -
- 2 followers
- 114 replies
- 11.7k views
Hi to all, I´m modeling a new character it´s kinda superhero whit big muscles in a cartooning style, here are some screen captures, working the middle copy and paste to see how it looks for now, any comments are welcome
Last reply by nino banano, -
- 1 follower
- 113 replies
- 10.8k views
I am starting a new WIP thread to consolidate everything. I will be posting in this thread as opposed to my old WIP thread. Currently the working title for the film is A Dragon's Love Story. This may change - I'm mulling over one or two other titles. The story in a nutshell: A dragon was once in love with a princess that rejected him. Realizing his treasure hoard no longer brings him happiness and he is leading an empty existince, he heads out in search of a mate. He searches high and low but cannot find one. He is about to give up when he finds love where he least expects it. I imagine completed length to be about 3 to 5 minutes. Both the main char…
Last reply by Roger, -
- 112 replies
- 8k views
I've decided to model a guitar. At first I wanted to model a car, but after several failed attempts, I decided to build something on a smaller scale to get used to the feel of the mechanical/organic style modeling used in both cars and electric guitars. I decided to model a fender Stratocaster a. Because I have a Strat knock off and b. Because strat's kick @ss I decided that I'd keep everyone informed on my progress and I'll make it into a mini-tute (I don't have the time to do an extremely in depth step by step). At some point I will probably compile it all and give it a permanent spot on my website. Remember that I'm not coming here as an expert, as much…
Last reply by zacktaich, -
- 109 replies
- 20k views
My instinct was to wait until I had a lot more of these done, but, I figured that it would be silly if there was a fundamental error in the more basic stuff which ruined everything more complex that followed. So, I'll post the first round of really basic ball bounces that I've been messing with. The goal is to work my way through basic exercises in an attempt to improve. Constructive critiques are encouraged (I am trying to get better)...thanks in advance for any pointers. This set of four starts with a ball drop without any squash and stretch, then a small amount of lateral movement is added, then squash and stretch is added and finally some roll is added. O…
Last reply by Rodney, -
Oz Contest WIP 1 2 3
by KenH- 106 replies
- 7.3k views
I'm posting my WIP for next months contest here as I think this is an exceptional one. The contest...not necessarily the model. It would be great if everyone started wips so that comments can be made to make each individual design the best it can be. So, here's mine which is based on Richards design located here: http://www.hash.com/forums/index.php?act=A...=post&id=106977 Comments/improvements welcome.
Last reply by Paul Forwood, -
I'm getting back to my own projects for a while and making another character. This guy is going to get the works. I'm going to concentrate on his head first (and maybe last) and I'll be using 3DPainter to do his texturing and bump maps. I'm adament to make this my best character yet. So, here's the first stages of the head. I haven't got great references and so this thread is to ask if anyone has good ones I can use. Or knows of a good website.
Last reply by KenH, -
The Crystal Apple 1 2 3
by Zaryin- 1 follower
- 103 replies
- 9.2k views
Ever since I made my image "The Satyr and the Apple" I had planned on making a full image on the subject. It will include a few characters in a outdoor forest grove that resembles a noble's court. Here is the link to the original "The Satyr and the Apple" pic: http://www.hash.com/stills/displayimage.ph...&fullsize=1 In the new image, I have redesigned the satyr's legs to something I like a little better. Right now all I have is decals on the cloth and eyes. SSS is on the skin. I will be adding decals later and hair will be added toward the end of the project. I will most likely be changing and/or adding clothing to the Satyr as I go along. Reflectivit…
Last reply by Shelton, -
I saw a few days ago that they were redesigning Batgirl after darkness of the New 52. I saw the pics, and decided to roll with it. They are going for a more fun Batgirl so they can get away from some the darker sides of Gotham. The only thing I really don't like about the design are the boots, but I have decided to stay fairly faithful to their representation. I am at the point where all my pieces are separate and I will begin to add the detail. I have SSS on everything, and the only decals so far are on the eyes. The boots are placeholder, though they will look similar to the ones in the image. I can't find the original story where I found the images I was u…
Last reply by John Bigboote, -
-
prison cell 1 2 3
by tbenefi33- 1 follower
- 101 replies
- 8.7k views
Hello everybody I'm working on a prison cell I got the jail cell done and I've made 4 copy of the cell when I copy all 4 at the same time it takes a long time to past them was wondering why does it take so long copy and past or do I have to copy and past a single jail cell ?
Last reply by Caroline, -
new landscape 1 2 3
by mtpeak2- 2 followers
- 101 replies
- 12.1k views
Yes another landscape. I haven't done much in A:M lately, creative block. I finally forced myself to start a new project. Still alot to do, but it's a start. This was just a test render at a low resolution and scaled up, so the quality isn't great, but it will give you an idea. The ground and water aren't textured yet and I still want to add a few more props and foliage.
Last reply by Paul Forwood, -
Here it is, the head of a dragon (so far). I've always admired the Ciruelo's fantastic art and 've always wanted to model a dragon. So i'm taking advantage of a few weeks of vacation to do it. Comments are welcome!
Last reply by Eos, -
- 1 follower
- 95 replies
- 13.4k views
a new client wants an animation which explains the order process of his new business idea, it´s a special kind of courier service. they want the animation to look like it´s a real cartoon, but it should also look modern & stylish. so right now i´m trying to find a style that looks like a hand drawn cartoon, but also modern and somehow hip & cool... i just took a character i had and retextured him (the characters in the animation will look different) and modeled a few props and buildings. it´s more about the general look and the render style first. any suggestions what might get it look even more cartoony? david, if you´re reading this: what would b…
Last reply by Dpendleton77, -
- 1 follower
- 92 replies
- 7.3k views
Hi everybody, I'm a big fan of the rock band Rush and cannot resist using the boys as models with which to improve my skills. Attached is my latest effort to render (from left to right) Neil, Al, and Ged. Comments and criticism are appreciated. Feel free to rofl; I gotta toughen up my ego anyway.
Last reply by case, -
- 4 followers
- 91 replies
- 8.4k views
Woloshyniuk and I decided to make one topic for our whole film instead of making seperate topics each time we do something new. We will be posting all models and scenes in here, staring with my last recently made: Ki Adi Mundi's Jedi Starfighter Droid Starfighter Battle Droid Clone Trooper... I went ahead and gave the clone a colour design. id love to hear what you think of it. also, the legs i have there arnt done.. still need to smoth them out and finish them off.. but everything els you see is practicaly done
Last reply by clonewar12345, -
- 90 replies
- 9.1k views
My Webpage The site sort of explains it all better than I can here. Not expecting reams of critical feedback on it, but if you're gonna be real thoughtful about it, then go ahead. Been working on this monster for over two years (since May of 01)- so 2.5 years. It's your typical one man, one machine (well two and needing a third for the final rendering) sort of thing. And in 2 and half years I FINALLY get to post an image from the actual production. So there's proof that STICKING TO IT WILL GET YOU THERE- oops, not done yet, I spoke too soon! Oh one other thing: My focus for this film isn't (oddly enough) animating. It's more on design, story…
Last reply by Dearmad, -
- 90 replies
- 9.4k views
Yet another project to keep me from getting enough sleep...but lot's of fun nonetheless. This idea for a series was one I suggested as a project for the Atlanta AM User's Group. The idea was to use marshmallows as the characters and have all sorts of horrible and hilariously funny things happen to them "by accident". We would call the series the "Marshmallow Safety Films". Being such vulnerable creations, accidents are pretty easy to come by. Colin Freeman took a first crack at modeling one of the characters while I developed several story boards. Shortly thereafter Colin had to focus the Egyptian project he was doing at IBM, and we have not gotten the group togethe…
Last reply by williamgaylord, -
- 90 replies
- 7.3k views
I thought it would be relatively simple - but how wrong I was! But I have learned a lot so far; but I know that I have a long way to go. Side_View_Dust_v10_sphere.mov Front_View_Dust_v10_sphere.mov I am trying to weaponize it now. I found the tutorials on making an electric arc in a Jacobs Ladder and I thought this would serve as the output of the PPCs. Having trouble though.
Last reply by bubba, -
The original Nautilus I modeled was one of my first models I did in AM. This one is a new version I am working on that will be used to make a 4 foot scale model.
Last reply by nino banano, -
Hi Hashers: I was thinking, and I decided to model my mascot, for some animation tests.. I intend do him with several skin types, to fit in the proposed animation, this first one, I sought something GOLLUM type, just for fun .... His name is Pzu .... I am having some small difficulties with TSM2.01and animation ( stills are perfects ), but as soon as possible I begin with the animation process ... all comments are welcome .... Peace Xtaz First pic ... shaded wireframe
Last reply by Paul Forwood, -
- 1 follower
- 87 replies
- 7.1k views
Hey everybody! I've been working on a personal project (Dark_Jedi is also slated to start on this) lately that involves creating TONS of Star Wars character at medium detail as photo-realistic as possible. (Sorry Colin, no Lost World entry yet) All in all, there are about 30 characters that need to be modeled. Here's my old work (about 6 months ago) for the project (they're animated): I'm not 100% satistfied with these and I might go back to them New stuff: This project involves a lot of "speed modeling" which I LOVE! This guy was done in 3 1/2 hours: Newest WIP--one of my favorites I'll post as I get…
Last reply by Pizza Time, -
- 4 followers
- 87 replies
- 6.6k views
The project that I am working on requires alot of dynamic interaction between layers of cloth and hair so I have been testing these features recently. I decided to start a thread to show what I find and hopefully get some answers on the way. I don't know if there are any differences between Sim Cloth in A:M 13 and A:M 14 but I am testing both. This is a 2 second movie, from A:M 14 Beta 4, which shows that Sim Cloth on Sim Cloth is possible: The missing patches on frame 0 is an A:M 14 bug, I think. It always has a render problem on the first frame of the QT movies that I have rendered from Beta4. I have noticed that when I render to Sorenson 3 format fr…
Last reply by entity, -
New Project 1 2
by MasterFunk- 2 followers
- 86 replies
- 8.7k views
I have decided to make a short movie in order to better my skills as an animator, modeler and texturer. I centers around a ninja that has to complete an assassination. Right now I am working on the set. So far I have finished the bed and the table. Here they are. I look forward to the completion of this project and the criticism to help me make it better. Thanks in advance! MasterFunk
Last reply by MasterFunk, -
- 3 followers
- 85 replies
- 6.2k views
Went through my pc and came across an older project where I made a base female body (for something to work off from). So I decided to make my griffon project again which was why I was inspired to make the base body. Here is the finished head attached to my base body. Might be pointying her ears, I haven't decided yet. This is my first female head ever after I don't know how many years of modeling. I think it looks pretty good. Not perfect, but pretty good. Next to build clothing and armor for my griffon rider. Comments welcome .
Last reply by Paul Forwood, -
- 84 replies
- 9.7k views
Hi hashers : I finished the project ( conception, sketch, some storyboards ) to my new short last week , to make it ill need 2 cars, I worked 4 days to make the first car ( named X-Two2-GO ) .. in this week ill work on instrument panel and engine parts ( maybe , I don’t know if I will do it ).. In this topic ill show all progress 1- Shaded Wireframe 1 2 – Shaded Wireframe 2 3 – Shaded Wireframe 3 4- Model without surfaces 5 – X-Two2-GO finished I hope the link work ... the album with the images can be find here : Project animation if the link doesnt work .. please copy it an paste…
Last reply by mtpeak2, -
- 1 follower
- 83 replies
- 8.4k views
Check out the new per pixel displacement in V13! Thanks, Martin!
Last reply by Fuchur, -
- 1 follower
- 82 replies
- 5.7k views
Hi there, it's been a while since I been on here, anyways, I need some help. I am trying to make a movie (non-profit) and I need some models built. Naturally, I would build them myself, but because it's supposed to look good, I won't do it, as my models are crap! Anyways, here are some reference pics, but I wouldn't use them as rotoscopes as they're not to scale or anything like that. Anyways, I would really appreciate somebody building me things. There will be other ships that need to be built, but they haven't been designed yet. It would be nice to have this look as professional as possible, so that means textures, details etc. There are no set dimen…
Last reply by Darkwing, -
- 2 followers
- 82 replies
- 6.7k views
It's been long and long since I posted anything -- heck, it's been awhile since I made anything . I have totally forgotten how to do the most simple of things within A:M, so this should be fun trying to get back in. But I'm really going to try to get back into it this time, and I thought what better way than to make my character from my friend's adventure. This character is named Connor. He is a twenty-four-year-old who looks no older than twelve. He has above average night vision, unusual strength for his size, and is skilled in martial arts. Since I'm not the greatest at drawing I decided to go with a sketchy look for my concept. I actually thought it tur…
Last reply by mouseman, -
All the recent post's in the R&R section have inspired me to start a new model. I plan to get this one rigged and animated eventually. I have started the model but won't have anything to post until this weekend. Here are the concept images. I am not a religious person but was taken back to a time that could be seen as a religious one. (the experience anyway). I sketched it and sculpted it for my mother when she was experiencing her last four months of life.
Last reply by Scottj3d,
