Work In Progress / Sweatbox
Subforums
-
Showcase (57,211 visits to this link)
-
- 530
- posts
-
A:M Stills (86,549 visits to this link)
-
Works In Progress (WIP) (59,111 visits to this link)
-
- 3.1k
- posts
5,151 topics in this forum
-
- 11 replies
- 822 views
Hi all! I'm making a bike chain with sprockets and, I can't get the chain to work at all. Does anyone have an idea how to make the chain follow the sprockets? I have 1 bone for each link in the chain and I'm using A:M v11.1. //Korken
Last reply by jpappas, -
- 1 follower
- 11 replies
- 700 views
I'm experimenting with some deform plug-ins and this is what came out from one of them. I'm not sure this is what I had expected, but it's interesting in some strange way. Useful? Probably not ;-) And Jim. Sorry for trashing your beautiful model :-o [attachmentid=11560] M02a.mov
Last reply by Julian, -
- 2 followers
- 11 replies
- 995 views
I love animating this guy...this time I just made a short 5 second clip of his threat...here's a screen shot: spider_threats.mov
Last reply by GAngus, -
- 11 replies
- 740 views
This is for my boss's presentation on Monday. I just thought I'd post as an example of AM in an everyday boring old job.
Last reply by pdaley, -
- 11 replies
- 819 views
The lenses are clear, but they do block a lot of light to his eyes. I tried bumping up the ambience on the eyeballs, but that has the effect of washing out his irises (simple color decals). Is there a way I can brighten up his eyes without washing out the pupils? I'd rather not use geometry for the irises unless I absolutely have to. Thanks! Nos
Last reply by Dagooos, -
- 11 replies
- 708 views
Ok taking another little break from my c-130 aircraft model, this time Im goofing with a water splash(no splash yet though) ...oh well , something like the topic title, attached are a couple short clips of theb Eddie model from the CD falling into what is suppose to be water, the motion and timing and just about every thing else is way, way off, all I was doing on this go round was working on the sprite air bubbles, and I slaped together a simcloth water surface, with sloppy settings, a lightgel on a light, and some sloppy eddie key framing of him flopping underwater.... More later I hope... Any suggestions are welcome and noted, Michael[attachmentid=12452]…
Last reply by arkaos, -
- 2 followers
- 11 replies
- 1.7k views
I was experimenting with the Newton Physics in v13 Alpha and found that it is working much better than before. In the attached movie clip you can see several oddly shaped objects falling on top of each other. The lighting is done with Ambient Occlusion and took 33 minutes to render. To set up a sequence like this make any object like a ball and throw it into the choreography. Next you are going to have to set which objects will be used in the simulation. To do this click an object you want to use in the simulation. Go to Plug-in Properties, then Newton Dynamics, and turn Use in Simulation to On. Then you are going to set whether it is a static object or a dynamic obj…
Last reply by the_black_mage, -
- 11 replies
- 703 views
Last night I did a final render of my project and when I played the movie I noticed that one of my characters limbs (left arm) was moved about 5 cm to the right from where it was supposed to be in every frame. Before I composed the final render I rendered it out in shaded mode to make sure everything looked okay, and all was as they should be. I ended up having to move the arm back to it's correct position in every keyframe and also the fingers went all wonky. Thusly I had to re-position all 5 fingers in about 25 keyframes (125 fixes...took a while). I saved the project, then did a render in shaded mode. All was correct. Then I rendered in "final" mode with "shadow…
Last reply by arkaos, -
- 11 replies
- 705 views
Hi there, i was just trying to set up a scene with some dead trees which looks a bit spooky. Main focus is the atmosphere, which should be as eerie as possible. Enjoy. Heiner
Last reply by the_black_mage, -
- 11 replies
- 723 views
Not much done on this scene yet, but I thought I'd post it so far. Batman's actually not going to be in the final, but I needed SOMETHING other than just the buildings for now. I have big plans for this...hopefully they'll develop quickly
Last reply by trajcedrv, -
My new splash page
by Guest william40- 11 replies
- 567 views
Hello all, It has been a couple of months until I posted something. I have been working on my website and on there I have characters created in Am. (All except for the rabbit where created in AM.) As you will see I am a fan of toon shading. I do photo realistic as well. I just have the about page done and contact. I am putting the animation together to post real soon. Have a look.... www.hennesproductions.com Cheers, William
-
Flea
by Dalemation- 11 replies
- 871 views
This is a flea character for our little film. There is a QT view of him here. It's coming together quite well now. The voice track is almost completed (I have one person yet to record) and a team starting to animate. We've been modelling mostly up to now. [attachmentid=15198]
Last reply by Dalemation, -
Mp3 player
by agep- 11 replies
- 804 views
Hi all. I have tried to visualize an Mp3-player design that I had in my head. This is yet another retro design attempt (I kind of like retro design). While I tried to make the player function as an traditional ear-plug player with an necklace, it is also given an little speaker so it can function as an small table player (not an powerful one though ). Hope you like it. btw, The DOF does give some artifacts on the earplug in the background (this is an 25 pass render with soft ON). Regards Stian [attachmentid=15204]
Last reply by Paul Forwood, -
- 1 follower
- 11 replies
- 987 views
Hi all, I'm trying to render a scene with some furry animals stampeding. In the initial test renders the fur goes crazy stretching beyond it's length and penetrating the kows's bodies. I've tried setting dynamic sample at various figures up to 2048 and all of the different dynamic types without success. Setting the dynamic type to none removes the hair stretching, but doesn't fix the hair penetrating the skin.....has anyone come up with a recipe for hair collision detection that works? I downloaded the hair tech talk which unfortunately is a comprehensive reference to everything but collision detection. [attachmentid=15598] stampede.mov
Last reply by DanCBradbury, -
Hi Hashers : Im postig this just to show an idea : DROP.MOV ( 117Kb )
Last reply by steve392, -
- 11 replies
- 1k views
i made this little GIF. just for the fun of it and decided to post it here [attachmentid=16220] what do you think?
Last reply by cuboos, -
I finished this a few weeks ago for a video documentary. The rockslide is all Newton - I shaped the mountainside to direct the rocks onto our slow response digger worker. Thankfully, he survived the incident. link to video
Last reply by ericsh6, -
- 11 replies
- 922 views
I'm on the home stretch with the cast. Just 3 more robots to go. All female, so I'll take more care making them. Then I go to storyboarding, recording voices and building sets. Once that's done I'll finally start animating some episodes. Click here or on the picture
Last reply by prometheus999, -
- 11 replies
- 436 views
http://johnl.inform.net/pages/9particles.htm
Last reply by Dhar, -
- 11 replies
- 681 views
Hi folks, I was asked at work to create a device that would wash solar panels. A dusty solar panel can have an efficiency reduction of 40%. The forensic lab [attachmentid=17841] that is under my care (I'm a stationary building engineer), has the whole roof covered with photovoltaic (solar) panels that generates its own electricity (under optimum conditions). Cleaning the dust from such a massive solar farm proved to be difficult, so, I devised this hi-pressure water sprayer that guides itself on the panel and the operator simply pushes the pressure line up and down the panels. This is a simple illustration I made this week, (roughly 9 total hours), tha tillustra…
Last reply by Dhar, -
Hi Hashers : I would like to thanks the votes in my entry ... and show you the high resolution version of it ... CLICK HERE (1.4Mb - 2880x1800 pixels ) .... some informations : IBL - Amb.Int. = 180% / Amb.Occ. + 95% HDR - 640x640 / Rad = 800:1 Sun Light - Int.= 25% / Ray Casts = 5 / Darkness = 95% 25 passes render time = 98h 22m I will donate the project to Extra CD/DVD .... for now I put the robot ( full rigged ) model to download in my site ... comments are welcome as usual .... Thanks again
Last reply by Stuart Rogers, -
- 11 replies
- 595 views
I thought I would post this in both the showcase and the compositing forum. I've been working on some effects shots for a short film (56 minutes) Using animation master to animate smoke and shell casings. Though certainly my implementation could probably be improved on it doesn't look bad compared to the relatively dead and inactive look of the shots without any compositing. The vietnam sequence consists of a about a 60 second firefight. -Ethan [attachmentid=18455]
Last reply by oakchas, -
- 11 replies
- 814 views
In the first clip called water.mov, you'll notice black speckles on the trees. I've narrowed this down to doing a final render with at least 4 passes and with "soften" on and of course having hair with targa files and a alpha channel. Most likely I could render this with A-buffer rendering without black speckles, but then the precedural bump on the water doesn't show. That would mean no water flow. The second clip has two segments. On the first segment, you'll see rippling in the water. That was done with an animated decal and setting the first and last frame in the choreography. Unfortunately, after saving the project and opening it back up again, the key fram…
Last reply by markeh, -
- 1 follower
- 11 replies
- 561 views
Recently i have gotten the oppurtunity to do some more work for NASA ( no pay but it will look good on my resume). At the NASA Glenn research center several groups are working on designs for the modules to go back to the moon, one of the groups needs some modeling and animation done, and asked if i was up for it. Of course i accepted. Below is what i have done so far. I am going to have to make a few bump maps and diffuse maps for the lander, but it is pretty much done. Comments welcome, Ben. PS the legs are fully articulate, so are the radiator panels (the random black panels).
Last reply by bentothemax, -
- 11 replies
- 395 views
It's not got the waighting finished as yet ,but just trying legs and stuff out,.Looks like she's on strings to me whatyou think link
Last reply by case, -
- 2 followers
- 11 replies
- 783 views
Here is a shot of our talking toolbox from our childrens video coming out later this year. I have been working on the rig with the folks over in the rigging section. I have finally got some of the lip poses completed. Steve
Last reply by Shelton, -
- 2 followers
- 11 replies
- 1k views
Hello Everyone ... I thought I would share a new animation that I have created. It is for an educational project in development called "Astronomy 101" and is geared towards ages 8-11. The movie clip is called "The Introduction" and ...well ... "introduces" most of the cast as well as the background story . Please visit and take a look if you can. I am especially interested in some feedback from those of you with kids in that age catagory (8-11). Please excuse some of the "cheesy" graphics and special effects ... but I think it is still watchable. EDIT: Opps ... I had the wrong ages in the original post. Ages 8-11 are the target. Thanks to everyone for your t…
Last reply by wedgeeguy, -
Been messing around modeling Beavis & Butthead. Just wondering which do you fellow AMers think looks better. Below is a render of helmet hair and particle hair. Which is better looking?
Last reply by Ilidrake, -
- 1 follower
- 11 replies
- 769 views
I've just created a new gallery of astronomical art on A:M Stills with renderings of all EIGHT planets. (I've been working on these for the last few years, before the whole Pluto debate got started. I didn't include Pluto because any textures would be fictional until New Horizons arrives there in nine years' time.) Since I'm not trying to make a scale model of the Solar System, each planet and its system of satellites is a separate choreography modeled at a scale of 1/1 million (1 meter = 1000 kilometers). Here are some samples: I'm putting these renders up now because I've recently figured out some methods for using the Planet Glow shader effectively…
Last reply by DanCBradbury, -
- 1 follower
- 11 replies
- 896 views
http://www.bee-s.com/~gggg/avi/vkus.mpg -Tasteff hier is a dragon to you! -Ivan I brought you a sour cream! -Come in! Try these ones! -Hey fellow! Not so quick! Ravioli from Tasteff!
Last reply by dre4mer, -
- 11 replies
- 838 views
hey guys i though with the little free time i had today i would go back to a few models and update them a bit with V13 first one i updated was the spider also all my renders will be done with AO and HDRI pictures sipder fixes: changed the eye color proprties made the hair thiner and changed the color fixed the frontal claws to make them have a bit more texture and some cp tweaks this was before:[attachmentid=21027] this was after:[attachmentid=21026]
Last reply by thejobe, -
- 2 followers
- 11 replies
- 846 views
Saw someone playing with flocks so thought I'd try an old idea Flock of lights flockoflights.mov flockolights.zip
Last reply by Rodney, -
- 1 follower
- 11 replies
- 920 views
Hey guys, I just finished modeling and rigging this character. To test the rig out I put together a quick run cycle. Rendered @16 pases and moblur. [attachmentid=22278] http://www.vrcops.com/vids/Runit.mov
Last reply by KenH, -
- 11 replies
- 906 views
I have been gone from A:M for a very long time! (1.5 years) I suddenly realized that today and decided to dust it off and play with a simple flour sack...I thought it would be a good exercise to make a walk cycle and possibly a few other actions. I am quite rusty and would like some tips for improvement. Thanks! sackwallk.mov
Last reply by Dhar, -
- 3 followers
- 11 replies
- 1.4k views
Downloaded the Iccarus software which analyzes video and re-creates a camera tracking solution which can then be imported into A:M. The video clip is from the Iccarus tutorials. I followed along with the documentation to create the tracking solution and exported the track into an A:M v9.5 project. The project loaded just fine into A:M 13. Then took Shaggy and added him to the chor and had hip skip merrily through the scene. For a first shot at doing this, I think it turned out fairly well (as far as the camera tracking goes). I know the lighting does not match the scene and Shaggy is too crisp and sharp compared to the video, but it was just a test. C&a…
Last reply by Luuk Steitner, -
Haven't tried hair for awhile htest.mov htest.zip I varied the thickness and color of the hair over time which translated to percentage of length I must say it renders a lot quicker
Last reply by goodguy20k, -
I started working on a project that I started awhile back, rerigging the kong model with the squetch rig (still lots to do). Unfortunately, at the time I didn't realize that materials are lost during import of the model into the rig, so he has no fur, will rerig at some point. I saw the post by MrBones for the bvh files (thanks) and tried it out using Andy's tut (and thank you) on using them with the squetch rig. Here's the test, I think he had a few too many. BVH_test.mov
Last reply by mtpeak2, -
- 11 replies
- 991 views
Animation done for the RevveR Film School topic "Green". After over 61 hours, 4 minutes, and 37 seconds of rendering, the render was corrupted... So I re rendered on my main PC, taking 11 hours, 40 minutes, and 19 seconds. So total render time was 62 hours, 44 minutes, 56 seconds. Animation time was from RFS announcement of topic "Green" until February 18th on and off. Thanks, rate high folks and remember to share this video with your friends. Crits welcome, I had to do it fast because the contest only gives you a month to do the film. Help me win guys RevveR Film School Animation RevveR Animation Backup (WORKING)
Last reply by phatso, -
- 11 replies
- 780 views
While taking a quick break from TWO animating, I stumbled upon this technique. It may have been done before, but I think it looks pretty cool. I'd like to get it abit more "impressionist" looking, but can't figure it out in the render settings. See what you think! The mov file is based on this image: castle.mov
Last reply by John Bigboote, -
- 1 follower
- 11 replies
- 465 views
As the required rite of passage for TWO, here's the lion and the door. Have spent the best part of a week chewing on the carpet just to get it to this point. It's been better, and it's been a lot worse. Adding Kinetic constraints always flips the hands 180 degrees. Keeping constraints on has been an exercise in frustration suppresion. Ah well, if I have to disgrace myself before the entire Hash community, let this be the day. LION_AT_THE_DOOR.zip
Last reply by Kelley, -
- 2 followers
- 11 replies
- 750 views
Hello everyone, I reworked my May 07 "Toon" Image contest entry and am posting it here for your review. I made a few changes in Photoshop and I prefer this version over my contest entry. The model is my own original design of a transforming Fighter Plane/ Robot that is part of a short personal animation project that I am working on. The model is designed so that I don't need to swap models when I am transforming in in a shot. It is rigged and ready to go. The mech in the image is one of the mecha designs that will be in the short. This model is pretty much done but I have a few more minor details to work on on this model (so it is still a …
Last reply by agep, -
- 1 follower
- 11 replies
- 1.2k views
Seeing how much John Stewart on the daily show works his magic at political humor, made me want to try something while the election process are ongoing. Someone made a really good John Kerry caricature. I was going to see how many of the political figures I can do.
Last reply by ruscular, -
- 1 follower
- 11 replies
- 941 views
A martian tripod from "The War Of The Worlds". I was intending just to put together something like a proxy version, as I wanted to get the gait sorted out first, but I got a bit carried away.
Last reply by cuboos, -
- 1 follower
- 11 replies
- 391 views
As it stands, I added 10 key frames to a clip, one every second, and alternated 0 and 100% for the ambiance settings of a model bulb. Setting the interpolation to "hold" gave the quick blink. Clumsy, but it works. Never having used expressions before, could someone give me an idea of how to do this over a 10 second clip? This would be more elegant than keyframing, especially if I wanted to do this for a longer clip. Thanks
Last reply by Luuk Steitner, -
Splat
by jfirestine- 11 replies
- 918 views
I know this one is not perfect. I was bored. Input is always appreciated. Thanks, goober_splat2.mov
Last reply by Zaryin, -
Alien head
by macb- 11 replies
- 910 views
Hello, Been a long time since posting anything. was playing around with A:M the other day and came up with this guy. m
Last reply by arkaos, -
- 11 replies
- 485 views
Took a break from animating fish to put bones in the Beast and Rider. 'Will become a short animation. Not sure where it stands in the 'to do' list.
Last reply by Kelley, -
- 11 replies
- 702 views
ive been working on wallpapers for my friends company as part of a promotion and too improve my skills a little over time this one is the newest 24:20:37 render time radioisty with AO and 36 multipasses tell me what you think
Last reply by thejobe, -
- 11 replies
- 773 views
My First Render for my submission to the Hero contest... If you guys have any suggestions, please let me know! I know i'm missing something, i just can't put my finger on it... Image_Contest__Hero__Photoshoped_edit.bmp
Last reply by dborruso, -
- 11 replies
- 709 views
I am almost done scanning photos for my wifes family ..so far over 300 scanned and if possible repaired..anyway I decide to "play" tonight with AM and looked at the extra DVD and found the DoDo Here is my attempt to animate it and try something for a project I am working on wonderful.mov
Last reply by johnl3d,
