Work In Progress / Sweatbox
Subforums
-
Showcase (52,870 visits to this link)
-
- 530
- posts
-
A:M Stills (78,104 visits to this link)
-
Works In Progress (WIP) (54,843 visits to this link)
-
- 3.1k
- posts
5,143 topics in this forum
-
- 4 replies
- 523 views
Here's a picture of something i drew. I need help on modeling it though, any tips?
Last reply by Zaryin, -
- 28 replies
- 3.4k views
This is more of a spline doodle than a WiP. I started splining without any goal in mind and the next thing I knew I was modeling Tin Woodman. For the animation portion (if you can really call it that) I was focused on two primary things; what expression could I make with solid shapes that don't articulate (i.e. how much squash and stretch could I get with shapes that don't change) and could I get a part of his neck design to double as a hint of lower teeth when his mouth opened to a full extent. The basic splining followed an attempt to distill Tin Woodman down to the fewest lines possible for easy of drawing (primarily for storyboarding) that I never ended up us…
Last reply by Rodney, -
- 4 replies
- 672 views
i made this logo for a pod cast wesite that asked for logo submission's its called "This Week in Technologie" i was going to try useing hair to make the strands come out of the end of wires but it is for a low rez logo and it wouldnt who up well. it was fun figureing out how to get the twist in the wire 'wire Man' 'Wire Man' toon version
Last reply by ufoman4, -
- 1 reply
- 3.1k views
Hey, all. Been working on a face for a while. For some reason, all of a sudden, in shaded mode (with or without wireframe), the model looks as though it's gone into peak mode, bias handles don't work, and I can't figure out what I did to it. Wireframe mode, however, is smooth. Any ideas would be welcome. Thanks. Rich
Last reply by robcat2075, -
- 1 reply
- 238 views
Anybody know why this is rendering the way it is? I am just trying to render out a wireframe version of a football stadium I built and it has started looking all weird. I rendered one out like a day ago at 320x240 and it looked fine...now I'm not sure what the problem is. Any ideas? Edit: I just tried rendering it out again at 320x240 and it seems to work fine. It is just when I try a larger resolution (D1, DV etc.) that I get the weirdness in the rendering artifacts... Does this help? I am trying to get it rendered out today for a job so any help is appreciated! :-)
Last reply by Godfrey, -
- 1 follower
- 14 replies
- 786 views
Witch one has the best camera move? Disregard the lighting, and render quality etc... shot2_.mov shot3_.mov Shot4_.mov
Last reply by jason1025, -
- 9 replies
- 844 views
Pole Climber was the topic in wednesday's four hour Animation Showdown. An' it were a tough one! This is my entry re-rendered for better lighting and with a few animation tweaks suggested by other contestants, including ZachBG. Download it from my Showdown page
Last reply by robcat2075, -
- 0 replies
- 162 views
[attachmentid=21054] This test constrained to path, lens flares, toonation xray material, and simple expression causing random light flashes. [attachmentid=21055] TG a_test14.mov test1.zip
Last reply by johnl3d, -
- 1 follower
- 7 replies
- 1.2k views
It's been a looong time since I created anything remotely good in AM, even longer since I posted anything. So I decided to get back into it and create a new character. I've never been good at creating realistic people, so I am creating a cartoony style wizard. Here's the first WIP shot of the head:
Last reply by Rodney, -
- 8 replies
- 641 views
Its a Tommy Gun. RATATATATATA!!! :-) You can check it out <here>
Last reply by Wegg, -
- 11 replies
- 636 views
I am almost done scanning photos for my wifes family ..so far over 300 scanned and if possible repaired..anyway I decide to "play" tonight with AM and looked at the extra DVD and found the DoDo Here is my attempt to animate it and try something for a project I am working on wonderful.mov
Last reply by johnl3d, -
The Author and bandmember of the song "I wanna be a cowboy" emailed me he saw my video and has given me permission to use his song online with my work! How cool is that!!!???? Wonder if that's how Weird Al Yankovick started? Awesome! Made my day!
Last reply by TheSpleen, -
- 20 replies
- 1.4k views
yeah, it sounds crazy, but i guess it's worth a shot. i am trying to create wolfs, specifically wolfs from the anime Wolf's Rain. for now i am going to start with Kiba (the white wolf), so far i made an "outline" of him from these images: ... i am beginning with the nose, then up the face. however, i might need some tips like how to model a wolf's mouth and the eyes. here is what i have so far in wireframe: hope you like it so far, even though it sucks
Last reply by the_black_mage, -
- 43 replies
- 2.9k views
just a sneak peak of a nearly finished render!!! Model by woloshyniuk, Dark jedi models comming soon. test.bmp
Last reply by clonewar12345, -
I've been meaning to make wolverine for a while now. He was and still is my favorite character from X-men. The version I'm doing is the one from the old X-men arcade series. Definately one of the best arcade games. Anyways, I started on him last night and this is where I am today. Comments and Crits are appreciated! Thanks! Later- Lazz
Last reply by someawfulbridge, -
- 30 replies
- 1.4k views
I should be working on TWO stuff right now but... Okay, so I happened to come upon a picture of this action figure of Wolverine and decided that it really needed to be modeled Here's the torso so far... [attachmentid=22727] again I really want to get that cool look that Blur studio gets. Is that kind of look achievable for A:M? What do you think? Lee
Last reply by the_black_mage, -
- 13 replies
- 1.3k views
Last reply by seduar, -
- 9 replies
- 936 views
Hey all, Just a little offering that I made over the weekend. Comments are welcome. Enjoy! -Nathan Glemboski
Last reply by nglemb, -
- 0 replies
- 278 views
Was bored so I tossed this together
Last reply by pixelplucker, -
- 17 replies
- 1.3k views
If your familiar with the work of J. scott Cambell (Gen 13, Danger Girl) Then hopefully you'll recognize my inspiration for this type of toon render. Wonder Woman was just the first superhero I thought to model (most likely becuase of all the chat about the movies, which is on again off again, then justice league, which is on again off again). Anyway, I'm posting because I was hoping for some feedback (as well as someone to tell me I'm not wasting my time). About the model... everything i learned and applied here came from Demented3D's tutorials.. so props to that genius of a man! Everything is toon renedered and surfaced colored with gradients. The only decals …
Last reply by itsjustme, -
Wood
by Guest Wegg- 35 replies
- 1.9k views
Here is a nice Finished Chestnut wood. . . Probably really good for furnature. . . Can check it out <here>
Last reply by Wegg, -
- 1 reply
- 394 views
Was just playing around and done this old art wood manikin.
Last reply by robcat2075, -
- 10 replies
- 802 views
Just started yesterday and this is what I have got so far. Tell me how it looks and anything that can be helped with is, I would really like to place in this months 'toy' compitition.
Last reply by Teh_Demon, -
- 42 replies
- 2.6k views
Wookie Dance This just uses the same .bvh mocap ZachBG posted in the resuable motion forum. Since it worked with 2001 skeletons I just had to try it out on the wookie. It's not perfect (the arm passes through his face/body a couple times) but this is about the best I've been able to get hair to render in an animation. Plus a wookie dancing to some MJ is just plain funny. Kevin
Last reply by starwarsguy, -
- 16 replies
- 1.4k views
I think I finally worked out the secret to modelling in A:M. There is no way to model in A:M. Or to be more precise there is no ONE way to model in A:M. When I grasped that it finally hit me. I can do the characters I want to do. There are still some issues with this model but its becoming clearer now. (Is this post less whiney for you? eh eh . JOKING) Cheers Mike R
Last reply by Rodney, -
- 3 replies
- 362 views
Haven't posted a new project in a long time. This is what I am currently working on. It is a scale layout of one of the workcenters where I work. I made some significant layout changes in this area about 4 months ago and I wanted to be able to demonstrate the differences. Taking pictures was not doing the trick. This is the new layout. All of the components are the same for the old layout it was just different. A couple of notes: Nothing is bevelled. I do not intend to get much closer than what is shown in this shot so I didn't want to waste the time modelling and subsequently rendering bevelled parts. As a result, all of the various components are extremely pr…
Last reply by Sacman, -
- 1 follower
- 10 replies
- 490 views
This is a project I've been working on for a friend whose done a short movie. I'm also learning AM as I go so this is my first model in this program and I find the modeling somewhat different from what I'm used to but kind of like it. I have prior experience in other programs.
Last reply by the_black_mage, -
- 1 follower
- 6 replies
- 608 views
This is my first fully rigged character in AM. His name is Murphy and he presently has 25 facial morph targets with 3 more to add. This was an exercise to see what AM could do as I usually use Blender,Maya, and Max. I'm going to do some animation shots at the end of this week.
Last reply by jweinrub, -
- 1 follower
- 0 replies
- 627 views
Thanks, Mark Day
Last reply by MarkDay2378, -
- 1 follower
- 35 replies
- 5.2k views
Its going to be a 3D version of a German comic character: Die kleine Gruftschlampe. I am in touch with the creator Tikwa and doing a full 3d version of that character. I am not able to post a full picture of the character yet, but just google it. So far I did the cloth. Rendering is done in two steps: One regular render and one toon lines only render which gets layered onto the standard render. Cheers Heiner
Last reply by Heiner, -
- 19 replies
- 976 views
I've been working on a face-criticism with proportion is needed because I've been working without a rotoscope or a tutorial. Small crease points may be dense and random becuase of stray and largly cross sectioned splines. Wireframe and shaded are posted conglomerously. gif.bmp
Last reply by Vash, -
- 9 replies
- 10.2k views
I'm currently working on an episode for Youtube. Running time will be around 6 or 7 minutes. Watch out for wampires! Bat Fail Low Res.wmv
Last reply by ChuckGram, -
- 1 follower
- 8 replies
- 555 views
Hi Splinemeisters, Nothing special. Just made a female GenMan. Have an animation of her using a slightly altered action used for GenMan walk. I think I'm going to revise GenMan a little, there are some things I overlooked in that model, that I fixed in MrsGenMan. Should be posting her soon. WmanLg.mov
Last reply by trajcedrv, -
- 1 follower
- 5 replies
- 11.2k views
This is turning out to be quite fun so far. For an upcoming scene , I need to make three police officer models. If any of you happen to have one handy, it would save quite a bit of time. Oh yes, in case you didn't recognize the old Arnie Head model, there it is Dinosaur.mp4 Stipid dinosaur.mp4
Last reply by ChuckGram, -
- 67 replies
- 3.5k views
Iv been playing around with walk and run cycles as I never seem to get it right ,heres my first go at a run run0.mov
Last reply by steve392, -
- 6 replies
- 486 views
Hi all, most of the time i use "am" like "mm" (modelling master), but now i want to dive in the great see of animation. I know it will be hard, but i hope do go to it. It took quite awhile to build an character i would like to animate. Now he is nearly finished, waiting to be rigged and i want to show him to you, wondering what you are thinking about this little fellow. Comments of any kind (no God please) are welcome. Greetings Frank
Last reply by Newbert_Zero, -
- 20 replies
- 1.7k views
I found the face to this model while cleaning up my e-mail. I used the low patch body that serq2 provided to the forum and the hands and arms of the witch model from t.w.o. I also used some teeth off of a model from the cd (Ms Goodbody?). I dont remember where I got the ear from. Pretty much a lot of different body parts stitched together. Used quite a bit of porcelain as a result
Last reply by NancyGormezano, -
- 13 replies
- 415 views
Can anyone tell me how to adjust glow intensity? It's really messing up this set.
Last reply by starwarsguy, -
- 1 follower
- 8 replies
- 1k views
Trying to reporudce a 30 second clip from the s how. Here's the start...
Last reply by teh1ghool, -
- 6 replies
- 644 views
here is a screenshot of what im doing. I am making a animation music video of the song We Will Rock You. i have the lead singer guy in the front and the back five sing the We Will, We Will Rock you part. i am editing the sound to make it sound funnier so it sounds like litter creatures. well another thing would be if this is legal or not. but what i want to know is if there is a way to have a bunch of the little creatures doing a head bob during the whole song using sprites or something to make it easier or something.here is what i got... i want to make the whole thing in the back filled with those guys easier than having to drag and drop all the models and place th…
Last reply by totlover, -
- 1 follower
- 18 replies
- 682 views
I am working with the plasma for the next sensation of the creatine? any words on my civil notice?
Last reply by cfree68f, -
Worm!
by robcat2075- 1 follower
- 18 replies
- 1.3k views
I saw a demo for a "deformer" plugin for another program and thought, "A:M can already do that..." wormH.mov
Last reply by jason1025, -
- 1 follower
- 29 replies
- 1.7k views
I had a problem yesterday when I indadvertedly moved some bones in the rig. So today I was reinstalling the rig and working away steadily when suddenly the mesh and the rig disappeared in the model window. I reverted but the problem was still there ( or not as it were ). If I do a quick render the model appears to be there but if I try to edit the mesh or the rig nothing is visible in the appropriate window. ??? This applies in an action window as well as a model window. Can anyone please tell me what might have happened so I can avoid doing it again and get on with the rest of the work ? regards simon IMac, V15J,OSX 10.68 Eve_Blox_Toon_.md…
Last reply by Simon Edmondson, -
- 1 reply
- 253 views
I decided to look at bvh files and got one and used shaggy in a very rough attempt to get the feel for using the bvh action. I only matched four points of shaggy to the file which you can see since i did it in shaded mode so it is not very good but you get the idea 653k bvh.mov
Last reply by starwarsguy, -
- 1 follower
- 1 reply
- 316 views
hey guys haven't been here for awhile...well as you know I like making simple models for practicing animation with. Check out this quadreped model. in the midst of rigging still
Last reply by Dhar, -
Just saw this and had to say... Wow! Momentum Studios - X3 Upside Down Music Video Now that is some serious A:M integration with live action and the credits say this is old stuff... 2001 A:M Version 8.5!!!
Last reply by Rodney, -
- 45 replies
- 2.7k views
all i did was take a picture of my kitchen floor..... make a new material and change type to projection map. add the image..... and I can now use this on anything for example the picture is kindoff dark. (edited) this is the latest picture in this thread
Last reply by heyvern, -
- 2 followers
- 18 replies
- 1.3k views
Almost three years ago there was a little contest called Lost Worlds. I started an entry but didn't have time to finish. Today I started reworking the old project with a different color scheme and different materials although the premise is still the same.
Last reply by robcat2075, -
- 7 replies
- 326 views
I just though it would be good to keep my skills in hone every now and then so i did this model tooke me quite a while to finish but i think it finally done. i orginally saw this in an old 1985 tech magazine it was suppose to be the future of cell phones or something i was going off of basicly memory since i lost the magazine. its amazine how the idea of technology changes, just thought that was intersting.
Last reply by thejobe, -
- 2 replies
- 428 views
Some very dear friends of mine are getting married this Saturday and they asked me to produce a special video to be played during the ceremony. I gladly accepted and decided to offer it as my gift to them. I had previously requested help on this, and thanks to all the assistance, here is the final version. Visit my 3D Animations page and watch the first video "Kori & Jeff" (1.53 MB QuickTime). The stuff before the animation is actually longer, but I cut it down to make a smaller file.
Last reply by dark_ninja,