Work In Progress / Sweatbox
Subforums
-
Showcase (57,364 visits to this link)
-
- 530
- posts
-
A:M Stills (86,681 visits to this link)
-
Works In Progress (WIP) (59,282 visits to this link)
-
- 3.1k
- posts
5,155 topics in this forum
-
I am working on a possible mini movie contest entry. The action takes place in a baseball game. I am attaching a short clip showing a possible opening shot where the camera flies in to center on the pitcher. I am also attaching a larger still that shows the lighting in better resolution. I am looking for comments and critiques on the set and the lighting. The characters are not posed in anyway other than a pose that is not the standard T pose. When the camera zooms in the pitcher is very likely to be in a different pose and there will be more players on the field. Also, there be a little more detail on the field such as foul lines and markings on the outfield w…
Last reply by Fishman, -
- 8 replies
- 642 views
Take 1 computer game model, scoop out its head, chop off an A:M model's head, stuff it in the helmet, put a pose slider on the visor, and... You can make something like this, too: (why you'd want to, I don't know.)
Last reply by Sevenar, -
- 1 follower
- 3 replies
- 520 views
I've started once again on a generic anime figure, as part of my Steampunk Samurai Saga. I've only got the head so far:[attachmentid=13993] I think he needs another spline ring around the eyes, and around the mouth. (Actually, the spline from the corner of the nostril should go around the mouth, I think). Also, the ear is still rough. I need to add more detail to it. Other than that, how is it looking so far?
Last reply by arkaos, -
- 4 replies
- 591 views
Funny story behind this. So I am taking a 3D Animation course at the college I am going to, and the program we are using is Cinema 4D. We are doing a bouncing ball project, and I decided to do it in the program I am familiar with as well as C4D. I will compare the two when I am done and upload a comparison video if I see fit. You can also see the animation in Flash format BallBounce.mov - Quicktime BallBounce on Revver - Flash
Last reply by frosteternal, -
- 6 replies
- 1.2k views
working on some art for an iphone game i'm building and here's my 2nd attempt at armor. v3 will probably be my keeper. this armor set is what all my units will wear primarily with different textures for each race and the few unique armors that actually change the graphic of a unit on the battle screen, will be additional shoulder pads and helmets to this basic armor model. for instance 6 different armors all have this model for their base armor set but differ from each other by shoulder/head graphic. did it in about 5 hours and the video took about 2 hours to render haha. i'm considering trying a v2.5 with a more cartoony, Mii style character model with bubblie…
Last reply by falibu, -
- 1 follower
- 0 replies
- 435 views
-Moved to WIP-
Last reply by lazz, -
- 1 follower
- 10 replies
- 1.3k views
Hey everybody. Whats goin on? I haven't posted much lately, last thing I was doing was working on my "jaguar xk" car but my computer crashed and I lost the file. Kindof a bummer, but I'll get over it. So, I was gettin kinda tired with just modeling and wanted to get to animating. So I made a basic character that'd be pretty easy to animate. Its all rigged and stuff but just with the TSM2 rig (no smartskin or fan bones or nuthin). I figured I'd put it up here for comments and critiques and if you guys want it later I could donate it to the forum or the next CD or somethin. K. Cool. Lemme know what you think. Later-
Last reply by itsjustme, -
- 24 replies
- 1.9k views
Just as a quick break from modeling the Daedalus, I decided to model a somewhat simpler model, any guesses?
Last reply by Darkwing, -
- 3 replies
- 1.8k views
Well, I've got most of the things up on my website up that I want. I just needs some tweaking and a lot more (new) content. I hope to have time to actually work some on my short during the next month, so I expect some new stuff within a month. I guess the address would be good. http://www.tartpi.com/ Feedback is always welcome.
Last reply by zacktaich, -
- 1 follower
- 0 replies
- 435 views
Well I'm sick so I can't go to school today and tomorrow...so I decided to just whip up a little sidestep animation. I wanted to focus on overlapping (especially with the spine/waist) in this sidestep.mov
Last reply by jamagica, -
- 2 followers
- 45 replies
- 3.4k views
So...I'm doing this basics..posing. Over the course of the next week or so I'll simply be posing scenarios with a simple generic character and I need your input on them..The first one is "victory" I can already see that I need more spine curve exaggeration and the raised arm needs to be extremed some more..what else?
Last reply by jamagica, -
- 7 replies
- 527 views
Hello All- I have been trying to make a basketball swish through a hoop with netting and do it in a dramatic way. Alas,..so far ..no success. I have embedded a project for anyone who wants to take a look. Basically I took a basketball backboard (from an old hash model library) and eliminated everything but the metal hoop and netting. Then I took a Basketball (also from an old model library) to use as the "deflector". Using Mark Weller's video tutorial on using the Sim cloth simulator I took his suggestion and used the very top row of cps in the netting as the "attached" part of the cloth so that the netting was stuck to the hoop. Before I even added …
Last reply by John Bigboote, -
- 2 replies
- 566 views
this is my second bass and i have spent some time on this one its not done yet but there is alot of detail in it .
Last reply by Gerry, -
I saw a few days ago that they were redesigning Batgirl after darkness of the New 52. I saw the pics, and decided to roll with it. They are going for a more fun Batgirl so they can get away from some the darker sides of Gotham. The only thing I really don't like about the design are the boots, but I have decided to stay fairly faithful to their representation. I am at the point where all my pieces are separate and I will begin to add the detail. I have SSS on everything, and the only decals so far are on the eyes. The boots are placeholder, though they will look similar to the ones in the image. I can't find the original story where I found the images I was u…
Last reply by John Bigboote, -
-
- 5 replies
- 513 views
Here's a wip I have of a Bath tub project for Automation. This is what I wanted to use the 2 sided patch on but had to make an inner skin as instead. David EDIT: I don't know why the .m1v files play slowly (unless it's just my computer). It's too bad cause I get really good compression using them. tub2.m1v
Last reply by nerrazzi, -
- 6 replies
- 517 views
Here's a quick bathroom I made. Took no time to render at all. I just used progressive render in a radiosity scene and used neat image to give it a gloomy look. [attachmentid=21112]
Last reply by dre4mer, -
- 4 replies
- 402 views
Another for fun... Cheers, Eugene
Last reply by Zaryin, -
- 31 replies
- 2.6k views
Trying out a new style here... Reference pic:
Last reply by pixelmech, -
- 1 follower
- 11 replies
- 3.3k views
So I am starting on a project and basing both character off some cartoon rotos I found on the interwebs. I don't know if they're from the same cartoon or not, I don't really care, haha. I just want them to look cool together. I am making each mesh from scratch, except for the hands which I took from my J.D. character. I might take more things from other models of mine, but I'm trying to remember how to do all this stuff - so making it again is the best way I'm thinking. Here's what I got so far of the Batman. Just the base body. Still have to add all the detail and fix stuff as I go along. I should also mention that this is just a screen grab. Thanks fo…
Last reply by aen916, -
- 11 replies
- 1.1k views
Hey guys, I've spent the last day or two tinkering around with the idea of a low-res BB batman for fun. Anyway, I couldn't find many great reference images, so the majority of the work has been guessing. Meh, I'm not losing much sleep over it either. I know there are a couple hard angles and other kinks to work out, but I don't intend to render this guy at 800 x 600 at all. ...Tommorrow, the utility belt.
Last reply by KingSalami, -
- 1 follower
- 17 replies
- 1.9k views
Hello, all! Just wanted to get some feedback on my latest project. Tell me what you think. I'll update as soon as a can. Thanks!
Last reply by Rodney, -
- 5 replies
- 974 views
Hey, everybody...as my time draws short (1 1/2 weeks) I've been trying to finish all of the things I've wanted to get done. One of those things was going back and cleaning up all of the modeling/animation/lighting errors in my movie Well...it turns out that I only had time to correct 1 shot and I chose the one that I felt had the best overall animation. Here's the new one (old one can be found at time 2:22 at above video): EDIT: Here's a compressed version...not as good and there's a big annoying blue frame at the end that I forgot to cut out. uhmistahcompressor.mov I changed a couple of things I think you'll notice right off the bat (no pun intende…
Last reply by largento, -
Battle Droid 1 2
by Dark_Jedi- 1 follower
- 59 replies
- 4.7k views
Heres my next model iv been working on since last night. iv got the head pretty acurate i belive, but if anyone knows if im doing anything rong please let me know All comments are welcome
Last reply by case, -
- 2 followers
- 16 replies
- 1.5k views
Some shots of the model I was working on for the Image Contest before I had to abandon it: Front Shock Assembly Thruster Exhausts Angled Frontal View Angled Side View
Last reply by MSFlynn, -
- 12 replies
- 1.2k views
Hey, im getting animation master in a few days, and just thought id show off some of my previous work ive done. I thought this was pretty cool, and made it in about an hour. Starwarsguy and I are working on a halo one. Starwars is helping me when he isnt working on his incredible models of star wars. Hope ya like it: Oh and by the way, ignore the bike, its a test on the web site and I dont know how to get it off: Austins Spot
Last reply by Alli, -
- 4 replies
- 545 views
Had a few glitches with the swarm effect so but I'm mostly happy with it for a short project/test run.
Last reply by specter, -
- 1 follower
- 5 replies
- 808 views
Hi Hashers Well after a two months of waiting the waiting is over, sadly I didn't make it to 'The Finalists' sob, sob... Still I did put this flick together rather quickly and I spent only six weeks of spare time on it but the other entries were very good. Here's the link: BBC New Animator BUT! Undettered I will now start work on my next project, which will hopefully have more of a story line and be more entertaining. For those of you that are interested here is my entry. It is 25mb big and you'll need quicktime to view it - enjoy! Bella Bear goes flower sniffin'
Last reply by Paul Forwood, -
- 1 follower
- 34 replies
- 1.7k views
Well, I'm attempting to model the BC-304. I am not a very good modeler, so if you give a piece of advice on something to change, you might have to tell me how
Last reply by Darkwing, -
I spent a few hours setting the beach up, the image is in the attachment. if you have any comments please post them.
Last reply by Odog2020, -
- 20 replies
- 1.3k views
Here is a character is that I've been working on for a tiny short. Its a very simple character but I've been using it to try to learn to model and use the hair system. Over the course of the next few days/weeks, I'm hoping to tweak the model some, add a basic skeleton and set of controls, and possibly do an animation test or two in this thread. Suggestions in any area of the process at any time are greatly appreciated, Thanks, --Ross
Last reply by rossk, -
- 13 replies
- 1.3k views
I've been working on my short "Beany and the Giant Melon" a bit. I've run into some problems, but so far have been able to work around them decently. You can see a current render (just realtime) of the animation here. (its about 9.5 mB) Next on the checklist is to fix the "excited skip"...
Last reply by rossk, -
Bear
by jfirestine- 7 replies
- 1k views
Here is a first motion test for my bear character "Pana-Boon". I wanted to test the rig, and I have already starting working on the problem spots. There are several problems that I am currently working on. Some of them have to do with patches not receiving the correct color (neck) and others are problems with the mesh near the joints. Overall I think its staring to take shape. I have not used any smart skin yet. Its all bones and fan bones. Texturing needs to be done, especially the mouth, teeth, eyelids, etc. Finally he will be covered with the new version 11 hair. The rig has been completely built by myself. It uses Fk on the arms and IK on the legs. H…
Last reply by JBarrett, -
- 1 follower
- 5 replies
- 716 views
ive always had trouble animating and when it came to animating my own chracter it was awful so i still use models i find from people and the cd this is like try number 6th with this scene what i was going for was him doing a big jump hanging in the air a bit and falling and landing on his hands and feet. then getting up wobbling a bit the wiping the sweat off his forehead. took me about 7 hours to get this far. tell me what you guys think of my progress so far. bear jump
Last reply by thejobe, -
- 9 replies
- 1k views
I made this picture for my mom for her birthday. I made myself stay away from texture and realism for the most part, and tried to just focus more on the asthetic value of the picture a little more. It took probably 6 hours over the course of the week. The fir is always the biggest pain. Anyway, here it is.
Last reply by trajcedrv, -
- 1 follower
- 7 replies
- 735 views
Well it's been a long while. Little bit here, little bit there but I have something that I want to show. Yes, the lighting needs work. Yes, some of the sounds need a little tweaking. And yes, some of the textures might need modification. But what the hell, it tells the story so far! I will perfect it and add a little bit more before contecting the other bits I have done and then I think I will be almost half way through my little flick which should be all of 10-15 minutes. I am pleased... I think... BE WARNED IT IS NEARLY 60MB BIG AND YOU NEED QUICKTIME 5.0 OR ABOVE Bear Wood
Last reply by gazzamataz, -
- 14 replies
- 1k views
Here is an update to the beast-creature thing from beyond the swamp grave thing. 2.9MB Quicktime (Sor3) http://www.renderwild.com/3d/004monster.mov -Taco
Last reply by TacoBallZ, -
- 3 followers
- 44 replies
- 3.9k views
I don't think I've posted in the wip before! So here's my first time. Here are two models that I started building recently. I'll keep posting the progress here until they are done. Frank Silas http://www.franksilas.com
Last reply by Frank Silas, -
Been messing around modeling Beavis & Butthead. Just wondering which do you fellow AMers think looks better. Below is a render of helmet hair and particle hair. Which is better looking?
Last reply by Ilidrake, -
- 1 follower
- 12 replies
- 729 views
I'm in the beginning process of building a bed in A:M and before I go any further I'd like to know how to use the beveling feature in A:M. Any help is appreciated. Thanks in advance. [attachmentid=11818]
Last reply by jamagica, -
- 13 replies
- 1.5k views
Here is one of a bunch of characters that my uncle had for some kids stories so I thought I would give 3d Coat a whirl for the rough model design. I manually retopo'd the model and exported an obj, brought that into am and with a little cleanup got this. Some small tweaks but already have it rigged. Where I needed hooks I made simple triangles so they were easy to spot.
Last reply by pixelplucker, -
- 12 replies
- 1.3k views
This is a test render using photon mapping of the bedroom suite that I am working on. I think that it still a bit too sterile feeling. Feel free to be brutal when commenting. Bill
Last reply by wwoelbel, -
Here is a character that I have been working on. I've got him rigged, except for mouth bones and poses. He does have a jaw so he can open and close. Three questions: 1) Is he engaging? 2) Does he need teeth? 3) Does he need eyelidds? Thanks! Scott
Last reply by trajcedrv, -
Beechcraft
by agep- 1 follower
- 38 replies
- 2.7k views
Hi I've just started a new project. Its a model of the Beechcraft Super King Air 200. I'm still early in the modeling process. My plan for this model is to make it crash (hopefully in a live action test). Even though its not much to see yet, let me know what you think *UPDATE* added latest render:
Last reply by higginsdj, -
- 2 replies
- 359 views
I have a klieg shining out of the side of the sub that casts these wierd beams. I just want a smooth diffuse beam. Tried rendering with multi pass and without - both show same funky beams. Tried volumetrics on and off, no difference. Anyone? There is also a plain bulb in the wheelhouse which is not doing what I want. I want the bulb to dramatically illuminate the inside of the wheelhouse with a good amount of light shining through the bulb windows but not through the rest of the hull. Any suggestions?
Last reply by Eric2575, -
- 4 replies
- 424 views
Been playing around and thought this worth a luagh oh can't upload it yes.mov
Last reply by robcat2075, -
- 14 replies
- 1.2k views
I like to balance a little good news with a little bad news... THE BAD: Here is an example of the 'render anomoly' where my shadows 'pop' and I am wondering if anyone gets this upon rendering animations. THE GOOD: BEER! I recently modeled and animated a nice glass of beer! TO SEE the GOOD and BAD: Roll over my avatar and you will see a button to play the avatar full quicktime. THE BEER: The cool stuff with the beer (still dinking with it) is the bubbles and the auto gravity pose and the empty pose. For the bubbles, I made two :15 animations in AdobeAfterEffects of rising bubbles with an alpha. I then applied those cookie-cut style to geometry cut an…
Last reply by SHADOWMASTER, -
- 1 reply
- 437 views
The spitball rock on which the Sentinel spends his time [his life?] is pretty much devoid of life, but there are large, torpid, harmless beetles in the snow areas. They appear as rocks poking out of the snow until Beast wanders too close and they slowly start to shuffle away. Occasionally, one cannot move out of range fast enough and will rear up and make ritual threatening gestures, then sink back out of sight. BEETLE_TEST.zip
Last reply by Gerry, -
- 2 replies
- 337 views
Hi! I have this character maybe some have seen in a couple tests i posted. Anyway i put up a fair amount of work in this head ( and i am pretty slow), and made a lot of muscle poses for the face. I made what i think is a common mistake by not so experienced users, the range of my poses don't go extreme enough. I have to go back in the poses and exagerate way way more. I would like comments and crits before digging in again. Also i would like tricks or advices on making poses with scaling included. I mean by that having the whole jaw area scaled up with an extreme smile, or a very exagerated drop jaw, or one orbit and eye area scaled up when questionning.…
Last reply by Animus, -
- 32 replies
- 3.3k views
Hi there, It was suggested to me recently that I should do some more work to an image that I entered into a Hash comp. a while back so here it is: Here is the original: I hope that it is an improvement. Any crits are welcome. John
Last reply by gschumsky, -
- 8 replies
- 867 views
It's not often I get the time to sit down and actually use A:M - certainly nowhere near as often as I would like. However, recently I managed to cobble together this piece of silliness: http://www.stuart.rogers.clara.co.uk/Mattress_sor3H_320.mov [ QuickTime6 - 5.4MB. I'm sure I ticked the 'internet fast start' box when I built this file, but it doesn't seem to be doing this, so you'll have to wait until it loads. Ho hum.] Strictly speaking it should be in the WIP section, as there's plenty more that needs to be done on it, but enough is enough - I've spent enough time on it and now want to get on with something else. Stuart
Last reply by jamagica,
