Work In Progress / Sweatbox
Subforums
-
Showcase (57,673 visits to this link)
-
- 530
- posts
-
A:M Stills (86,969 visits to this link)
-
Works In Progress (WIP) (59,591 visits to this link)
-
- 3.1k
- posts
5,158 topics in this forum
-
- 5 replies
- 870 views
here ya go tell me if you like it or not
Last reply by starwarsguy, -
- 1 reply
- 493 views
The face rotates 180 degrees, you are looking at the back side of the model when it does this ... but still appears to be the front. carmenrotate.mov
Last reply by BrainLock, -
It's hot out here at LegoDude's college summer camp, so I made this little fan to keep him cool. Set the movie to loop and you too can stay cool! (Unfortunately for LegoDude, when the conference ends, and he goes on stage to close things down, he's going to be melting in the heat, lose his footing, and get sucked into the fan... sort of a LegoDude meets Mr. Bill ending to a fun debut of LegoDude! ) If anyone wants the project, I'd be happy to share. Need to zip together a package so you'd get the decals (cookie cutter and transparency map). This represents about two hours of work, so things like on/off knob and (d'oh!) electrical cord are left to you to do! …
Last reply by Nosferatu, -
- 1 follower
- 8 replies
- 1.4k views
I made this sword by request from an internet friend. Tell me what you think. [attachmentid=9613] Update [attachmentid=9614]
Last reply by MattWBradbury, -
- 1 follower
- 6 replies
- 1k views
I decided to enter the next mini-movie contest, with a star-wars themed film. This is a render of a "flub". That isn't the expression I put on his face, it's the one that's on his face when I open the project. (If I hit the space bar, it switches back to normal). So, I decided to get a nice shot of Lazlo (The character, not the... uh, me...) in all his geeky glory.
Last reply by Datameister, -
- 34 replies
- 3.3k views
Ok.. I'd been playing with this idea for quiet sometime. Don't know if you guys know who Edward fudwupper is.. but its one of my favorite kids books from one of my favorite illustrators. I'd allways thought my son Cooper looked a little like Edward.. and I had to give it a shot. The how to; I use photoshop Liquify.. ALL THE TIME... for all sorts of things. From time to time.. I use it like the old morph tools to make funny faces. I took this photo... http://www.colins-loft.net/free/Coopsand.jpg and manipulated it to this in Photoshop.. http://www.colins-loft.net/free/ComicCoop.jpg As I did this.. it struck me that the same thing could be…
Last reply by cfree68f, -
- 3 replies
- 830 views
This is my third car plz tell me what u think of it
Last reply by parker_069, -
- 3 replies
- 672 views
ok my model is now ataching by the feet insted of the side. pleese help
Last reply by kylemb, -
- 9 replies
- 779 views
OK sorry to be a pest.... I read the help file on this, I followed the directions but there must be something I'm missing because while I am getting the mirroed part that I want, it is not attaching. I am working in front view, its mirroring along the y-axis properly, but does not attach. I am grouping the left half of the body, then right click, choose CFA, and I get the mirrored part but it doesn't attach. Any ideas what I am doing wrong? Do I have to move the pivot? thanks in advance Roger
Last reply by Rodney, -
- 3 replies
- 523 views
I've had a problem with the attached model for quite some time. I've "copy/flip/attached" one side of the model several times with the same result. After making sure the middle spline is zeroed on the x-axis and cleaning up the mirrored side (completing 5-point patches, etc.) I've brought the model into an action window to flatten and paint the face. After flattening, I've manipulated the cp's on one side to get the desired results, but when I "copy/paste mirrored" to the other side, only a few of the other side's cp's are affected. I've actually completed decaling the model and rigged the face only to get the same type of "copy/paste mirrored" problems in poses. The…
Last reply by cribbidaj, -
- 1 follower
- 6 replies
- 772 views
hi ive got half a model in progress and was wondering if this was ment to be here or if i should tuck it in edit: better pic is the normal curviture ment to be there if i want to copy, flip, atatch or should i pull it in
Last reply by Caroline, -
- 2 followers
- 9 replies
- 774 views
Well this morning I was messing around in the garage trying to fix my dad's grill. And right after I fixed it I thought you know I havnt modeled anything in a while...so I decided I would model my dads drill! So far its gone smothly which is bound to change very soon! And I decided I would show yall the progress so far. Well so far for me my work on it has been off and on all day. This is it so far... This is the wireframe from a different angle. The post is supposed to be called CORDLESS DRILL Sorry
Last reply by case, -
Core My concept of the powering source for a giant berserker - a small self-contained sun. This image is just some basic shapes and textures before beginning to add lights and massive detail.
Last reply by MSFlynn, -
- 2 replies
- 1.1k views
While trying to come up with good tutorial examples...A cork material. Two really... one to make the color and another to depress the black spots like the little divots in cork. Material06b_Flaskand_Cork.prj
Last reply by Kamikaze, -
A corkscrew made in A:M v11.0. I tried to reproduce Gobal Illumination lighting with only one light. http://perso.wanadoo.fr/ffave/img/Tire_bouchon.jpg Comments are welcome. Fabrice.
Last reply by Srmjr, -
[attachmentid=17422][attachmentid=17421] Updated here... Heres a Minor Update with an airlock and console. Not much but a little at a time. Have many models going at once! Another model Im gunna try to have added to the Extras DVD. Also hoping to expand on it to make "interchangable" pieces for swapping in/out of related various scenes. [attachmentid=17058]
Last reply by Rodney, -
- 3 replies
- 361 views
I have been advised to 'consolidate' a .prj with one .mdl and textures. I found it under Projects, but it's greyed out. How to turn it active? As this is a first for me, any additional tips are welcome. Thanks. ps: I've gone into 'My Controls' in an attempt to change the name above my avatar to simply KELLEY. The entry under the avatar changed, but not above. Is there a dialog box I've not found?
Last reply by Kelley, -
- 6 replies
- 596 views
ok so my friend comes up to me with a drawing he made in paint tells me this is how i want my dream house to look like ( which is just a blueprint top down view) he really wanted to draw it like a sketch but his drawing skills are less than par. so i told him i would take it up and give him a better idea of what he wanted it to look like this is what i have so far any crits or ideas on how to make it look cleaner would be helpful. also making doors and windows ideas would be of great help.
Last reply by thejobe, -
- 1 follower
- 14 replies
- 1.4k views
This is probably my best work so far... I have 5 views total that I have rendered out. holy crud! I didn't add a floor or connectors to the brushes! I won't get marked off for that on my project...hehe. I'll still fix it
Last reply by jamagica, -
- 27 replies
- 2.8k views
I accidentally sent the Flownuts Hyperloop Intersection on a flash drive or... I don;t know.. But, does it work,.? I was more about the couch launching the characters out and I lost the couch.
Last reply by Darrin S, -
- 1 follower
- 4 replies
- 487 views
Alright..here it is so far..not much, but I've never gotten this far this well
Last reply by jamagica, -
- 1 follower
- 82 replies
- 7.4k views
Hi there, it's been a while since I been on here, anyways, I need some help. I am trying to make a movie (non-profit) and I need some models built. Naturally, I would build them myself, but because it's supposed to look good, I won't do it, as my models are crap! Anyways, here are some reference pics, but I wouldn't use them as rotoscopes as they're not to scale or anything like that. Anyways, I would really appreciate somebody building me things. There will be other ships that need to be built, but they haven't been designed yet. It would be nice to have this look as professional as possible, so that means textures, details etc. There are no set dimen…
Last reply by Darkwing, -
- 7 replies
- 1.1k views
I was just look through my old project files and found the FW-190 Fighter so i thaught i'd spice it up a bit Heres pic 1............
Last reply by Rodney, -
- 2 replies
- 418 views
Hello, Here's link to the still image of the chain link gate and dumpsters I modeled for the animation: Gate and Fence jpg 001 Please let me know what you think. There's a model of the victim involved in the animation but I'm having trouble with the basics of layered animation with actions, walk cycles, etc. Something I'll have to practice with training videos and tutorials first. Get used to it, THEN do that in the project for a client, not while working on said project.
Last reply by nimblepix, -
- 1 follower
- 23 replies
- 2.1k views
I'm into rapping (if some of you didn't know) and I've decied to use AM to make the cover image...here it is so far...how could I blend the microphone in so it has the same detail as the rest of the model? Make it more realistic?
Last reply by jamagica, -
I wasnt going to post this but havent had anything to post in a while so.... A little 10 sec animation I made in march. The Cowboy is a modified skinny farmhand model and the kid was modeled by Alain. [attachmentid=19176] David march10sec.mov
Last reply by Dagooos, -
- 11 replies
- 1.3k views
Hey everybody. I'm working on a project with my buddies. I'm fairly new, so I'm doing one thing at a time. I did a toon render on a cowboy hat I modeled and animated. Please tell me how I'm doing. Click Here One more thing. I noticed that there's a gap in the shadow that's not supposed to be there. Any ideas on how I can go about fixing this? Thanks.
Last reply by starwarsguy, -
- 11 replies
- 1.9k views
This may a "How long is a pice of string " questions but, Is there a table or list that suggests appropriate weights to be given to CP's, using the 2008 rig ? What I mean by that, is given a standard joint like a wrist, what type of percentage spread would go across the forearm, hand and fan bone ? I've tried to work through it, but with very limited success, and need to address the problem again. regards simon
Last reply by Simon Edmondson, -
I saw a crab model on another forum and wondered if AM would be capable of similar. I think I convinced myself that AM is...mostly. The only thing missing from the model is about a hundred spikes. Not only do I not have time to model all that but I did some tests with displacement maps and if they didn't need so many patches, they would be perfect for such details. Anyway, this is as far as I'm taking it for now and wanted to show it.
Last reply by KenH, -
- 30 replies
- 2k views
My friend and I are going to be taping off sections of our schools steps to look like concentric rings when viewed from a certain point. We're just about done with everything we need to complete it. So, I thought I'd share it with you all, and see what you think.
Last reply by animas3D, -
- 3 replies
- 1.1k views
Here is an image of our last A:M project. The vehicles were modeled by Rodger Reynolds and Matt Campbell, great job guys.
Last reply by Dhar, -
- 2 followers
- 40 replies
- 4.5k views
The description pretty much says what I used. It's far from finished, as the blue truck needs to be heavily damaged and I need to interview the driver (blue truck) to sind out which way his vehicle spun. Image as a roto for camera. Yves' light rig, Explode and Newton plugin from yoda64. Had smoke in it but it didn't work out (NR problems). Here is a link to the file (about 4 mb). http://www.dustinproductions.com/files/coggins-k.m1v David
Last reply by ddustin, -
- 9 replies
- 1.5k views
here's a little animation I put up on AWfilms for kicks. It's the first project I've done with AW. I'm a 3D guy for some years now, but mainly polys. I'm really starting to like working with the splines. I know this isn't all that great, but I wanted to jump in and get my feet wet. Thought I'd see what advice or critique I could get from you guys. Thanks, CrawdaddyMovie
Last reply by Mike Hart, -
I need to work on several parts but this is a simple model. I really would like the teeth to show more. This is something I saw crawling around one boring day at work.
Last reply by ruscular, -
- 1 follower
- 5 replies
- 1.2k views
Hi guys, I know I posted in OT, but I meant to post here so here it goes: Basically, I'm going to use this thread and the site to talk about stuff involving Crayon. Here, and on the site, I'll be giving updates and all that on how things are going. Anyhow, there's not much on the site yet but, I'll be updating it, with pictures and video and stuff. The URL is: http://crayon.avituchman.com/ Sometime tomorrow I'll add some storyboard pictures.
Last reply by Avi, -
- 1 follower
- 5 replies
- 1.1k views
Hi guys, I did another test, here's the good stuff, you can tell what's going on and I tryed to employ some old 2D stuff into it also! It's 22 seconds long and here it is: http://www.avituchman.com/animation/test_2.mov
Last reply by robcat2075, -
Crazy Legs
by 927822- 6 replies
- 577 views
Hi, I am a high school school student. I have a new problem with my character, my action in the action window works fine but when I drop it into my choreography its legs go crazy. I would greatly appreciate any help Thank you for your time, Sav_edge56 Rebel4WIP.prj
Last reply by robcat2075, -
- 10 replies
- 869 views
I have a model, that is driving me crazy. When I change the groups transparancy to twenty for instance, it changes the thickness of the toonlines as well. I didnot have that on any of my other models and cannot think of anything that might cause this. Any help anybody? blobby090410.mdl
Last reply by jakerupert, -
- 1 follower
- 13 replies
- 1.4k views
Any one remember those stickers called Wacky Packages that spoofed real life products? They were the inspiration behind some new models I'm working on. I'd like to do a shopping carts worth. Comments?
Last reply by phatso, -
- 10 replies
- 1.1k views
Hi all! This thread will, hopefully, document the development of my series that I've been working on for years and years. I've been drawing these grape characters most of my life and I had a storyline that I tried on many occasions to draw/model and animate. As hard as I tried, nothing really "clicked" with me. Until two weeks ago. I was sketching a grape character and suddenly had a Breakthrough moment when I adjusted the porportions of the generic grape person and had a drawing that clicked with me. And then I had a rush of inspiration of the world that these characters live in and its history.It was as if all these ideas were just under the surface and waiting for…
Last reply by case, -
- 1 follower
- 11 replies
- 734 views
Hello- Does anyone know how to create a kaleidsocope image, through rendering (or otherwise) ? Something similar to the attached jpg? I was hoping there was some sort of AM render effect that might work, or something that would at least create part of a kaleidoscope section....... that could then be x flipped. I was looking at my After Effects filters and they have something which says it creates kaleidoscopes but is more a "Tiling" sort of thing that looks cheesy anyway. Thanks for any suggestions! Tom
Last reply by johnl3d, -
- 19 replies
- 1.6k views
Well, I have officially started designing my sets for the fantasy story I'm creating. This is a prelim of the first of many scenes. Here we have is a corridor leading....somewhere. Wherever is goes, it looks like a friendly face is sure to greet you. Preliminary. At this time I intend to add more to this set. - debris on floor and in corners - a few cute(?) little rats - maybe some carvings/runes/grafitti on the walls (?) - definately a carbon dioxide like fog rolling across the floor (some early attempts were pretty bad) - maybe a spectral form roaming the corridor. - more glowing effects from the lanterns Take a look, let me know w…
Last reply by oakchas, -
- 1 follower
- 22 replies
- 3.3k views
(Split this off another topic so as not to hijack that thread) The trick... to old style Locks of Hair... is to apply the Material to a single spline that drives the hair. Note: I am only assuming this still works in current versions of A:M. Will have to test to be sure. Still works! Here's a basic write up on the process: Locks_of_Hair_Project.pdf
Last reply by sb4, -
- 10 replies
- 831 views
I have modeled every rivit on this upper structure with a small sphere. As the number of spheres increased, my copy/paste function slowed considerably. To get back some speed, I cut each sphere in half, which helped quite a bit by cuttin down on spline count. I received a suggestion that I might be able to achieve rivits with displacement maps? Take a look at my project and tell me if and how I could do this? It is important to be able to actually see raised rivits on the upper structure since close-up will be taken of it when finished. Thanks
Last reply by filipmun, -
- 7 replies
- 3k views
Hello all- Just a quick question. I was checking out the UCLA Lab of Neural Imaging and came across a cool picture of a brain. I was trying to duplicate it in AM. I even thought that there was a Dark Tree shader that approximated x rays but couldn't find it. Anyway, in AM I took 2 spheres, crumpled the bigger one slightly and made it transparent. Added a color map and high specularity and came up with something that doesn't look even remotely what I intended. Any ideas how to achieve the effect on the left? Many thanks! Tom
Last reply by Rodney, -
- 1 follower
- 39 replies
- 3.1k views
Sure enough, Answers in Genesis like Review 2004, which I produced for them, so much that they have asked me again to produce a video for Creation Museum. My first step was to 3Dize the Creation Museum logo. I have a couple ideas for a nice animation sequence but I'm curious if anyone else has some input.
Last reply by Sacman, -
- 1 follower
- 6 replies
- 603 views
After many long, hard hours and very little sleep, I finally finished Creation Museum Montage for Answers in Genesis (AiG). This video opens with a 3D-animated logo sequence that I really like above all other logo animations that I've done. Until I get my credit card working again on SoundDogs.com, I can't buy the short version of the music for just the logo. So I'll post a high quality render of just the logo animation later. But for now, you can see the whole eight-minute video (40 MB QT) that I produced here. AiG plans to use this video at their Creation Museum fund-raising banquets (Creation Museum is being built by donations) as well as possible use as an i…
Last reply by D.Joseph Design, -
- 6 replies
- 883 views
I need some help on a few things. First~~ The control system of this short range light fighter. I have two extended panels for interment panels or tech readouts but I'm not sure of how to have steering controls mostly what type. Second~~ My material creation still sucks and I was hoping that some one had a material or a quick tutorial on a good space ship hull material. Third~~ Well...I thing overall the design is good but some second opinions would be good
Last reply by rusty, -
- 13 replies
- 3.6k views
Hey everyone, Started a new personal project. A while back I did an illustration of a creature (which can be found here http://i.imgur.com/KS5Ki4l.jpg) and I decided it would be cool to make a near photo realistic version in Animation Master. Still have a long way to go, but here is my start after a few hours. Texturing has always been my weak point (at least on organic things) so it should be a good process. Anyway let me know what you think! Ben
Last reply by kwhitaker, -
- 7 replies
- 1k views
So, I just finished a banzai weekend doing the 48hr film project. Among other things (I was the DP) it was my job to do the credit sequence. The trick was that although I was allowed to create objects and images ahead of time, the animation all had to be completed within the 48 hrs. In fact, because I was DP, and due to the nature of the project, I actually had to create them Sunday morning. My solution was to do a credit sequence that required very little keyframing and used simcloth to do the hard labor. I am attaching the final sequence and the project (minus images) ready to simulate. I thought this came out pretty cool. endcred_low.mov credit_sequence.…
Last reply by number,
