Work In Progress / Sweatbox
Subforums
-
Showcase (57,537 visits to this link)
-
- 530
- posts
-
A:M Stills (86,816 visits to this link)
-
Works In Progress (WIP) (59,444 visits to this link)
-
- 3.1k
- posts
5,156 topics in this forum
-
- 1 follower
- 10 replies
- 654 views
Here it is EDIT: I just noticed..the first board doesn't have displacement on the thin side whoops
Last reply by jamagica, -
- 1 follower
- 3 replies
- 654 views
I am working on a project for my squadron a little morale buster from the Co. It needs alot more to get this better and I have been away from AM for too long. http://phantomfighters.nrgservers.net/pftest1.mov
Last reply by PF_Mark, -
- 8 replies
- 654 views
I had already done the excercise a while back but did not like the lack of detail in the excercise. As all of you who have done the excercise know, the rotos supplied do not match in their dimensions. Sure they are decent references, but I wanted something a bit more accurate. So here is my attempt at a little more accuracy. Just to clarify, this is a WIP.
Last reply by agep, -
- 8 replies
- 654 views
http://images.heathnaylor.multiply.com/mov...pHYkI0MTTa2Hg== Long link, and long render time, 14 hours! Anyways, tell me honestly what you guys think of this latest creation, I haven't animated for a while so this was getting me back into the mix.
Last reply by dborruso, -
- 6 replies
- 653 views
ok ive been thinging if using the aim at constaint with the gun is a good idea. this is what ive come up with so far. i just cant figure out a way to make it work when the gun is being held by a model such as tom. here is the model. Gun_8.mdl
Last reply by JoshB, -
- 6 replies
- 653 views
Haven't model since my attempt at Opus so keeping with the bird theme here's an early head with hair/.feathers
Last reply by jamagica, -
- 4 replies
- 653 views
just testing out the distortion ..Eddie thinks it painful distortpose.mov
Last reply by jamagica, -
hey just something i made today out of shear bordom just though you guys would like
Last reply by thejobe, -
- 2 replies
- 653 views
Hey everyone, Just doing some more experimental mixtures of different mediums. What do you guys think?
Last reply by johnl3d, -
- 1 reply
- 652 views
Hi guys! I post my first dialogue with expression,what will be in my Aikido Basics project! I mind about it, that I have some mistake! Please check it and write me your opinions! Dialogue This movie is rendered REAL_Time, not final,and it's low-quality! It is required Divx 5.03! I'm waiting your opinion! Sharky
Last reply by johnl3d, -
- 3 replies
- 652 views
I've been playing with the Osprey tutorial from JohnArtbox and am pretty happy with my progress. I still am driving myself batty with getting the lighting that I want (trust me, it's more difficult than lighting a real set!). Of course, the requisite checkered floor has to make an appearance, although I'd like to have a better handle on materials to generate a grungier texture for the floor. I'm experimenting with decals as I can whip up terriffic textures in photoshop, but as for my ability to get them into A:M, well, I'm still in the embryonic stage there. This attached picture is about the 15th generation of the project (thanks to John for some of the models, as w…
Last reply by JHV, -
- 2 replies
- 652 views
Greetings! I run a small specialized psychological software company. I was very impressed with AM at a trade show. I need 3D looking animations of "characters" made into sequential "cells" that I can use as animated bmp files. If you are interested in contract work to make such characters, then please contact me at jas@braintrain.com, website: www.braintrain.com or call 804-320-0105 Joseph A. Sandford, Ph.D. President, BrainTrain
Last reply by braintrain, -
- 6 replies
- 652 views
Would it be better to post simple things like this effects.mov or this sky.mov or more complex stuff like test2d.mov
Last reply by rusty, -
Legions of Legos are battling for control of the galaxy. At least, that's what my son has been dreaming about in his play time. Some day this will all be animated. Photoshop created the energy beams and composited the individual shots. My daughter believes there needs to be some visible form of propulsion, even if the advanced technology that is pictured here uses invisible forces. What do you think?
Last reply by tobinjim, -
- 4 replies
- 651 views
Here is another game unit WIP. I made this model from scratch using copy flip attach.
Last reply by RViewer, -
- 2 replies
- 651 views
Here's my model so far. As is clearly visible, the front is largely unfinished and only in the basic blocking-in stage, and the rest still needs tweaking, but it's a start.
Last reply by goodguy20k, -
- 0 replies
- 651 views
I mentioned this some time ago in the Star Trek Red Squad thread and delayed opening a new thread up for it until now. So here's the lowdown. With Red Squad, it obviously has it's main and secondary characters with dialogue. The thing is, where this takes place on starships, these guys aren't the only crew members on the ships. So what I'm hoping/asking for, is if anyone has any decently "semi-realistic" heads that they're willing to donate to simply be background crew members who mill about, use computers etc. They could be guy or girl, though I don't have any female bodies built, so you may have to supply that as well, but if all you have is the head, I'll take tha…
Last reply by Darkwing, -
- 1 reply
- 650 views
Hi all, Thought I'd share my first public animation with a purpose! This is a short opener for a conference I'm helping with next week. LegoDude walks across the campus and enters the arts building (20 seconds; top frame is towards the end of that), then he enters the auditorium and walks down the aisle (a walk cycle down auditorium steps was fun!), climbs up onto the stage, then waves each arm to open each side of curtains (second image). After the curtains are open and the opening slide is onscreen behind him, LegoDude takes a bow (three different cameras capture this moment) -- last image. Thanks for the help of all those who worked with me on the walk cyc…
Last reply by vf124, -
- 8 replies
- 650 views
I'm not sure if this is just something I'm doing wrong, so I thought I'd ask before I submitted it to Hash. I posted it here so that I could attach the sample project. I have been getting some errors when making a key frame when there's a bone that rotates on the "Z" axis. I put together a project file here that illustrates what I'm encountering. In "Action1", rotate the "redhalf" bone (it should be the only one visible) on the "Z" axis (the limits are set where it should only move that way anyway), then set a key. If you are getting what I am, the geometry will move when you set the key and it will move a little more if you hit the button to set the key agai…
Last reply by itsjustme, -
- 6 replies
- 650 views
Five more proud last-place finishes from the four-hour Animation Showdown! All in Quicktime Sor3: Faint (83Kb) An experiment in frame rate. Jaws of Life (164Kb) Opening something difficult to open. Mount (103Kb) I've retouched this one substantially since my original entry, mostly to adjust arcs. My Favorite Toy (183Kb) Don't Let It Out (123Kb) You can see my past entries on my Showdown Page. The Animation Showdown is a weekly challenge to put together a bit of character animation in a short span of time. It happens every Sunday/Monday at DigitalRendering.com>forum>showdowns where you can read all about it and join the fray.
Last reply by nimblepix, -
- 4 replies
- 650 views
Hey folks-- Anyone got a spare run cycle for the TSM1 rig lying around? If so, and you're willing to share it, please email it to me at zach AT brewstergeisz DOT cjb DOT net. Or, just post it here if you prefer. It's for my vodcast and you'll get credit. Muchas gracias!
Last reply by robcat2075, -
- 2 replies
- 650 views
Well, it's been a while since I had any chance to do any modeling, so I thought the best way was to model something I'm really interested in...The Honda Rune. So far I have the back fender, front fender, and gas tank (thanks to help on the main forum). Got a ways to go, but it's coming along. I am basing this off of some press photos (top and side views, but they don't quite match...), as well as a little scale model I have. Someday soon I'll be able to fork out the $25k or so to buy a real one. In the meantime I've been developing hardbags for the Rune, which will be available in less than a month (if you have a Rune...or VTX 1800). Comments are welcome. …
Last reply by gschumsky, -
- 7 replies
- 650 views
I wanted to do more projects with Animation Master so well here we go!!!
Last reply by Rodney, -
- 4 replies
- 649 views
Okay I made a project wit two chors the first generates Thom doing two jump cycles as a tga sequence (used alpha buffer) Then for the second chor I import the sequence of tgas and use them as the sprite. I applied to model put in in chor and (not sure if necessary) choose frame at the end of each cycle to match what frame in sequence should be there ( action 1:01 so at 1:01 i chose sprite frame 1:01 at 2:02 chose 2:02)-again might not be necessary. Anyway then rendered the qt here [attachmentid=11396] project file with both chors instead of the sprite sequence [attachmentid=11397] I know its a bit rough but it hopefully will steer y…
Last reply by Dhar, -
Alien
by gazzamataz- 1 follower
- 5 replies
- 649 views
Well, I am hard at work on the next segment of my 'Bella Bear' Saga which involves the alien character. So I thought I would show him to you. He (it?) was originally modeled ages ago, but I have only just rigged and textured him - might have OD'ed on the spots... I thought I would try a bit of GI and Ambient Occlusion on him but it still looks a bit flat - not to good at that sort of stuff (yet). Anyway here he is, comments welcome and expected
Last reply by gazzamataz, -
- 3 replies
- 649 views
Hey! good day to you all, im here to present you our first full lenght animated film trailer (its in spanish but its going to have english subtitles) . We are 2 brothers that are making this thing posible, and we are VERY PLEASED to anounce you that all the 3d work has been done winth ANIMATION MASTER! so this is our BIG THANK YOU for all the developers of this magnificient software that allows us to tell our story. So ok, maybe not all of you will remember us but, in the past we release this very same trailer but with different quality and it wasnt fully 3d animated, so from then we have been working very hard to release this new and better version, so finally you can…
Last reply by ruvalcaba, -
- 1 follower
- 5 replies
- 648 views
I have not posted anything in a while. We have been working on the video and the modeling and animation have now started. Here is one of the characters in the video. Steve I have already increased the size of the hands. And here is one of the other characters as well
Last reply by Dhar, -
- 3 replies
- 648 views
ok my model is now ataching by the feet insted of the side. pleese help
Last reply by kylemb, -
- 3 replies
- 648 views
What is the best way to approach the decaling of a coiled rope? Up to this point I have only needed to decal rope a couple of time and then only one length at a time. Now that I am modeling the Spanish Galleon: http://www.hash.com/forums/index.php?showtopic=32733&hl= , I have a ton of rope to decal. I used to take the rope model, create a pose, and then straighten the rope in the pose to apply the cylindrical rope decal. This works great for one or two pieces of rope, but now I have so many pieces and coiled rope to boot. I wonder if you could decal a staright piece of rope first and then coil it? Maybe in an action or something?
Last reply by Gerry, -
- 8 replies
- 648 views
This is the first animation pass at an idea. still to come are the facial expressions and the finger movements and ( having just watched it through a few times ) preventing that sinking feeling in a few places. Its about 10-12 hours work but, any criticism welcome, good bad, or how could you ? regards simon
Last reply by Simon Edmondson, -
- 4 replies
- 647 views
Hi - It been awhile since I had him completed, but I finally decided to post my first attempt at 3D animation. I have never had any experience in 3D animation before I got the A:M 11. I started in April of this year going through the tutorial and got through it in a few weeks - THANKS to everyone in the forum for answering my millions of questions I posted. So then I decided to just jump into it and try to create a character. He was done after of few weeks of insane struggling. I Didn't want to post him, but figured why not - everyone seems supportive here. Eric LoCascio
Last reply by flashawd, -
- 3 replies
- 647 views
I was working on a few thinks today and realized I had not used the setup machine much so I made a quick dinosaurish creature and tried to rig it and use the setup machine. It took me a few tries to get the bones assigned correct but here is my 30 frame action . It doesn't look too bad when it loops or does it comments on this or any of my excessive posts welcome tinkering dino.mov
Last reply by johnl3d, -
- 5 replies
- 647 views
Its' a pretty straightforward 5 point patch. Why is the decal distorting on it? There are actually two 5 point patches on the jpeg next to each other- both distorting!
Last reply by JoshB, -
- 1 follower
- 5 replies
- 647 views
I just recently completed this image for a letter head. I was asked to recreate the Eye of Horus. Met final approval today. Enjoy. J p.s. Forgot to mention this. No post effects. This is the render straight from AM.
Last reply by Eos, -
- 3 replies
- 647 views
My TV production class is creating an animated short this year for a statewide film contest (FAME for all you Floridians). I figured that I would start this thread to get some useful critiques. The entire short will take place on a small pond where several frogs are going to sing an acapella version of "Swing Low, Sweet Chariot." I have finished the Frog characters- This is where I've run into my first dilemma. I absolutly LOVE the way the Darktree shader works on this model- It's perfect. But I applied the material at my house on my Windows machine. My school is running A:M off a MacG5. How would I go about ether burning the material on as a texture…
Last reply by phnxpyre, -
- 5 replies
- 646 views
How should I go about modeling a squirrel? I've never really modeled a good creature, so I'm asking for some process tips.
Last reply by starwarsguy, -
- 1 reply
- 646 views
Heheheehehe! I like this one. Very nice Jose! Casting Session by Jose M. Ruiz For some other work by Jose check out his website: http://www.josemruiz.com/ *Note: There are other films that have been added to A:M Films too!
Last reply by Manta, -
trying to get this together drop2a.mov
Last reply by johnl3d, -
- 4 replies
- 646 views
Hi all, This is my first post and I'm very new to AM so please forgive my dumb question. I want to post my first model so I can get your input, but I can't figure out how to output a jpeg. I know I can output a single AVI frame, but then what? Is there a way to output a jpeg, gif or bitmap? thanks, risk
Last reply by Rodney, -
- 1 follower
- 2 replies
- 646 views
Here is a screen shot from my movie WIP
Last reply by T-Dogg, -
Jump
by jfirestine- 2 replies
- 646 views
Here is a basic jump. Any input is greatly appreciated. goober_jump2.mov
Last reply by goodguy20k, -
- 0 replies
- 645 views
myGameTV.com is a new syndicated video game review TV show. The show airs in Florida as well as worldwide on the internet. We're like Siskel & Ebert on crack. We're seeking animated shorts 1-5 minutes long that are hilariously funny, maybe a little controversial. If they are gaming related that is a plus. Although there is no compensation, we offer screen credit and there is a lot of exposure and we can also plug your website on television. For more information contact: producers@mygametv.com Jeff Rivera Producer myGameTV.com
Last reply by jeffrivera, -
- 1 follower
- 8 replies
- 645 views
Starting to get real busy here. Had to do some layouts of some cast plates with depressed lettering and imprinted ceramic middles for a client to choose from. Love the displacement mapping in AM, so much easier then messing around with high density poly models or micro displacement. So much quicker for the basic texturing than just about any program I have used in the past. Thanks!
Last reply by HomeSlice, -
- 1 follower
- 9 replies
- 645 views
As the title says, this is the linkage used by steam locomotives to allow them to move forward or in reverse. The idea of splining the convoluted shapes and transitions intimidated me so much that I kept putting off starting them for months. But I finally bit the bullet and I think they can stand up to an arm's length inspection. The quasi rectangular frame (which is about 6 ft. long) has a close approximation of the final cast iron texture for all the parts but the Playdough colours on the other parts are just to ease inspection.
Last reply by Gerry, -
- 0 replies
- 645 views
http://www.youtube.com/watch?v=qsoDdRR_-RA...f46RVAAAAAAAAAA I found this and thought "What a wealth of ideas!" Some wonderful CG deepspace effects. And so many of you like the space genre.
Last reply by TheSpleen, -
- 4 replies
- 644 views
can anyone see anything wrong?
Last reply by CreativeAustinYankee, -
- 5 replies
- 644 views
Just finished making the bones for my Ant model, could be better but i dont know how to fix it. If anyone can take a look and give me some pointers that would be awsome. heres some pics and my model so far. thanks. Ant.mdl
Last reply by pixelplucker, -
- 4 replies
- 643 views
this is too slow and nothing is tweaked image if you can bullets fired across the ground more later or what do you think it is really bdot.mov
Last reply by lazz, -
- 6 replies
- 643 views
WINDBLOWN: This is an old animation (to me)...done in V11.0 about 1 year ago. The vortex can be seen in her hair... I think I was going to try a more subtle effect but got sidetracked and never did it. This shows hair being affected by a fan tho--- as I said in the other Forum, use 'vortex' on the fan setting...I think I remember the others don't work...maybe by now they do... windblown2.mov
Last reply by Mr. Jaqe, -
- 5 replies
- 643 views
Some small QT clips of clouds using V13a9 displacement , all done on one patch, also tested how shadows fell on the cloud disp. geometry, these are only tests, decal of a cloud with thebackground black for transparency, so far decal used 3 ways, Displacemnet, varying percentages (even animated percentages) Color 100% Transparency 100% Michael[attachmentid=15006][attachmentid=15007][attachmentid=15008] Last test clip[attachmentid=15009] Cloud_Disp_test2.mov Cloud_Disp_test3.mov Cloud_Disp_test5.mov Cloud_Disp_test6.mov
Last reply by Kamikaze,