Work In Progress / Sweatbox
Subforums
-
Showcase (57,643 visits to this link)
-
- 530
- posts
-
A:M Stills (86,939 visits to this link)
-
Works In Progress (WIP) (59,557 visits to this link)
-
- 3.1k
- posts
5,158 topics in this forum
-
- 2 followers
- 58 replies
- 4.7k views
Before downloading to your desktop, and playing the qicktime, remember these commands. For PC users "Cntrl F" for full screen and "Cntrl 0" Zero not the letter O for Half size if the picture is too large for your display. For mac users substatute CNTRL with the Command key. I hesitate to show this clip because its no where near finished and I am not happy with it at all. Not to mention this is one shot out of about 16 and its out of context so it will not be to impressive to you. The shot lacks the render quality/ look that I desire. My inexperience caused me to shoe horn in some AO into an indoor scene and it kind of works but so far I feel a Radiosity look…
Last reply by nino banano, -
- 9 replies
- 1.3k views
Sorry to revive this post after a few years... but sadly i lost my only copy of this toon i made when my last computer melted... which is why i'm hoping someone may have downloaded a copy of it and still has it hiding some where. if you do, can you please let me know how/where i can get a copy... thank you much Sorry, but Facebook is giving me problems.... had no choice, posted on You Tube.... (which I didn't want to do until it was really finished, it also seems really dark.... http://www.youtube.com/watch?v=Gq3pgX0MoPA
Last reply by Walter Baker, -
Alien
by bentothemax- 1 follower
- 11 replies
- 1.3k views
Just got a new AM subscription since I have a lot of time over Christmas Break. First project I have started is a humanoid-alien. There are a few issues and I need to work on the proportions a little more. The feet aren't done, but should be soon. Lemme know what you think
Last reply by bentothemax, -
- 5 replies
- 886 views
Just in time. Holiday animation of a Santa character that I modeled and rigged. santa_final_test_smaller.mov
Last reply by nino banano, -
- 1 reply
- 864 views
Ok. This is not the best video of her. Just another experiment. Bring the criticing on. I know I'm good for it! I got alot of glitches in this. Again, I'm so not the best animater. Got to get the key framing down. Oh yeah... As some know I do music. Made a track for NBA 2k 06. I made the track in the background of Tamara Workout. Tam_Workout_1.mov
Last reply by Simon Edmondson, -
- 11 replies
- 1.8k views
Here is one more model from the movie 2001 - A Space Odyssey. It is the Moonbus, used to ferry the scientific team from the Clavius moonbase out to the Tycho crater where the monolith was found. I remember having the Aurora plastic kit of it when I was in my teens. Found some blueprints for the moonbus, as well as some excellent photographs of master model builder Martin Bower building a studio sized model. Al
Last reply by Tralfaz, -
- 1 follower
- 48 replies
- 3.2k views
So, time;s been tight, but ELZ is still being worked on. The following are three shots I have completed so far for the opening. These replace the still pics that I used in the animatic I posted a while ago. These are just still shots, but they are animated in the final product:
Last reply by Jeetman, -
- 14 replies
- 1.6k views
I have been thinking of starting a project over winter break. Of the ideas I had the idea to "3d-erize" my room won. I started so far by just modeling the main objects in my room: desk, shelves, dresser, bed. The bed right now is just a modified version of the bench from my piano project, It is just there to a be a deformer for the cloth system sheets I plan to put over it. 1 Light, radiosity about 2 hours 4x4pass Note- There is quite a bit of distortion from the 15mm perspective. Photoman
Last reply by photoman, -
- 6 replies
- 1k views
Hi everybody... The image used in this calendar was created entirely in A:M. Open every day a new present till x-mas... Especially funny and well done is for example present 2. (but there are many good once!) Just to mention it: These clips are not created by 3We (or you will see it in the credits). It is just a compilation of funny or very well made commercials. Have fun! http://advent.3we.de See you *Fuchur*
Last reply by johnl3d, -
- 1 follower
- 24 replies
- 2.4k views
Hi everyone , I´ve a some time without posting work, but recently I had a little of free time and start to animate a Lucha Libre test, jaja , I´ll apreciate everyone´s help by telling me everykind of constructive crits so I can improve my animation the best as possible, I let you this and be rude .... mmm well , not to much ... Saludos from México. Fight_testing.mov
Last reply by Jaff, -
- 3 replies
- 596 views
I still need to smart skin Thom and maybe slow up his picking up of coffee cup. My audio is also kind of crappy. Other comments? allin1.mov
Last reply by pixelplucker, -
- 9 replies
- 1.2k views
well... I hope to be finished within the next 2 or 3 days... with Xmas just around the corner I'm not sure how much time i can spend on post and rendering... Speaking of rendering, does anyone have any suggestions? While doing a test render, i noticed some plack artifacts around the particle systems, but I kind of want to keep it well lit and cheery... is there even a way to keep it close to the workspace render... given time constraints I may only have one shot at it. I'm posting some screen shots without facial expressions or secondary movements (also without hair or particle systems). (See images below)
Last reply by dailan1, -
- 9 replies
- 1k views
Hey all! Been a while sinse I've posted. Of course, it's been a while since I accomplished anything!. Heres a link to a project in the works. I hope to have more done by the end of January. Please let me know what you think. -Chuck
Last reply by johnl3d, -
- 2 followers
- 58 replies
- 5k views
Just having some fun. Still need to make the treestand and animate the lights.
Last reply by steve392, -
- 1 follower
- 24 replies
- 1.9k views
Well I'm on vacation until January 4th so I decided to start a new character. I want to have a simple-to-animate character that can have a wide range of expression. Kind of like the standard Animation Mentor characters. My ambitious intention is to build a rig for her and use her to get better at the animation side of things. I did add ears and some hair which may be more than needed but here's what I did so far. I'm having a little trouble smoothing the cheeks. It seems anytime there is a five point patch I get a slight crease from some angle. I don't want to use the porcelain material to fix it. I'd rather figure out how to do it with the splines. Righ…
Last reply by TNT, -
- 2 followers
- 31 replies
- 2.7k views
I am modeling a grand piano to exercise my modeling skills. Nothing fancy just a simple grand. Pretty much done just needs a seat and set! The aritfacts are from hooks, AO and hooks are not good friends. 8808 patches Photoman
Last reply by Tralfaz, -
- 15 replies
- 1.7k views
Hello hashers , This is my christmascard I have made for this year. You like it ? Greetings , Marc
Last reply by noewjook, -
- 6 replies
- 1.4k views
Thank many of the professinal modelers and animaters on here that have supported new users (like me) with help and downloads. Now I want to make a request. I'm asking can any one please make some woman action animations for the Thom model? Simple ones like walking, running and standing postures. Anything els possibly creative if you can.....
Last reply by Rodney, -
- 1 follower
- 125 replies
- 16k views
What could it be?
Last reply by robcat2075, -
- 4 replies
- 479 views
Yay! Finally something moving - I need to redo the cp assigning/weighting and play with constraints so the body stops doing goofy things when I try to move the bones, but its a start. I tried to upload an AVI file but it says I'm not allowed. Wonder whats up w/ that.
Last reply by Roger, -
- 1 follower
- 11 replies
- 1k views
15H Windows Shita 64 ultimate 16 passes AO on 15 sampling 24fps Render res 1280x720P No reflections Jpeg image sequence on screen 12 hours to render with 7 processors each render a unique segment with its own AM project open. In other words it could have taken about 6x longer if I had just rendered using one program of AM open on the same 8 core system. Cinema_Display_Motion_test.mov
Last reply by jason1025, -
- 2 followers
- 18 replies
- 1.9k views
Almost three years ago there was a little contest called Lost Worlds. I started an entry but didn't have time to finish. Today I started reworking the old project with a different color scheme and different materials although the premise is still the same.
Last reply by robcat2075, -
- 2 replies
- 456 views
Well, it's probably way overdue that I post a WIP thread on this project, so here's what I've got so far: This is the body for one of the two characters. Today I'll be working on modeling the head, texturing and rigging him. The other character is going to be cloned from this completed model. I'll need to make some minor changes to differentiate the two, like the other character will have longer sleeves, a thinner build, some minor tweaks to the face, and different hair/facial hair. But for all intents and purposes, the brunt of the work is going to be done on this character (Rigging, facial setup, etc) and the other character will just be a duplicate. Se…
Last reply by Rodney, -
- 1 follower
- 60 replies
- 4.9k views
I got an idea for an 11 second club entry over the holiday but couldn't start until today. So this may not get done at all but we'll see. what could it be?
Last reply by TheSpleen, -
- 9 replies
- 872 views
I updated this model as I never finished it some time ago ,anyway things have moved on since then and I think its much better
Last reply by steve392, -
- 20 replies
- 1.2k views
Hi all, Did some more testing on my working-pipeline with my cartoony cokebottle Vette. 15h on PC ,1024x576 - 200 frames about 8 minutes each frame rendertime, 5 passes, shadows, reflections (ground 4%), matcap shader on the Vettes body, chrome mat on chrome parts, apple matcap on interior parts, fake rimlight mat on the whole model, threepointlighting of defaultchor, keylight 55% and Gloabl Ambiance type Global color white at 30 %. the model is "waterproofed" (thick doublesided bodyparts) because I inserted volumetric lights in it. One major drawback: Cant see the posesliders effects in realtime while I set the keyframes, though they are there when I…
Last reply by NancyGormezano, -
As some of you may already know, Eric has been working on an EVA pod for my 2001 Discovery project. I was at the next stage of working on the models, which was trying to come up with a Dave Bowman model. Suffice it to say, that didn't work out really well. Figure I will come back to him later. Much later. I think I need to go through the face tutorial again and try to find some good pictures of Keir Dullea. At some point, I need to get a really good Bowman model completed. Anyway, I've been off work the past two days due to some minor surgery, and was getting pretty bored. Not really into watching soap operas during the day, so I thought I would give an EVA pod a go …
Last reply by Darkwing, -
well this guy need no introduction it's his twin brother...lol here some drawing.
Last reply by tbenefi33, -
- 16 replies
- 1.8k views
Hello All, This is my first attempt at a car model. It's more a study to see if I can model low poly vehicles quickly for use in real time simulations in Dark Basic Pro. I've got a good workflow going converting from A:M to .X, by way of exporting as an .obj, then opening and texturing in Ultimate Unwrap, and using UU's .x exporter. This model is "loosley" based on the RX-7, and, I didn't quite get all the lines, but, I just want to know if I'm heading in the right direction. Its just the body now, all in one piece. I'm not trying to get every little detail, because for realtime it would be just too many polys. Mostly, it would be nice to get the basic shapes of ca…
Last reply by mshihrer, -
- 1 follower
- 13 replies
- 892 views
rendered this character with a shirt and jeans image from Abercrombie and Fitch.... and to think I wasted time modeling buttons and shirt pockets!!! lol Only quickly put this on the front of the model, but with a little photoshop work, online clothing stores could really help with an animation project!!! http://www.3dartz.com/vids/jeans&shirt.mov Mike Fitz www.3dartz.com
Last reply by nino banano, -
- 5 replies
- 725 views
Found an old model that I never realy finished ,thought I would change the bad face and work on the decals .Still a lot to do especially the chest area mmm
Last reply by BrainLock, -
- 16 replies
- 1.7k views
Well, I guess the Discovery needs a cockpit, so here goes. Again, it would be nice to have some accurate blueprints to work from, but the model is getting there. Some of this is guess work as the cockpit is not completely shown in the movie. Still have the overhead panels to complete along with the seats and rear wall section. Once the model is complete, it will be posted in the models section to go along with the Discovery model. Al
Last reply by John Bigboote, -
- 0 replies
- 403 views
So, I'm jumping in and starting modeling on a short for submission in a film festival Film Festival Topic Discussion. The movie will be a Christmas Story of sorts. The main character is Old Man Willies. I started on his head..made one goof after another, then decided to use Sire Nigel as a starting point. After beheading Nigel, I then started to push and pull control points to get the look I was looking for. Here he is: crits please.
Last reply by fae_alba, -
- 2 followers
- 3 replies
- 542 views
Last reply by Shelton, -
- 26 replies
- 1.5k views
Ok. testing, testing 1 2 3 4 with this month's 11 second dialog problems I see: 1) rigging, modeling issues with arms, hands 2) lip sync for "yesterday I ate" starting around frame 155 3) hands penetrate around frame 95-96 4) ??? (not done with costuming, texturing) Comments welcome (and nooooo...ya won't have to go vote for me...unless you absolutely, positively want to wade thru 6 billion entries all with the same dialog) coccoonshiny8mpeg4medPCMhintedstream.mov
Last reply by robcat2075, -
- 0 replies
- 412 views
Was bored so I tossed this together
Last reply by pixelplucker, -
- 10 replies
- 1.2k views
I've set myself a challenge tonight. I'd like to see if I can go from sketch to usable character in two hours. The character is a Maxwell -- a sort of demon, or imp, based roughly on child proportions. At the end of two hours, I'd like to have: Produced front and side sketches Scanned them as rotoscopes Modelled the character Added the 2001 Rig Textured vinyl-like wrinkles where the skin bends in certain places This won't be a full-screen character, and a lot of fine detail would be eaten up by the noise I'll have to add to the final layout. (I'll ultimately be building a scene around a noisy, low-light photoshoot.) I'll check in tonight at 10:00, …
Last reply by robcat2075, -
- 1 follower
- 15 replies
- 1.3k views
This is just a quick experiment doing a dolly shot. The background is a layer object ,as are the trees and the grass. There is a Sun light oriented to match the sun in the background (with lens flare). The rock in the foreground is the only geometry (it was a test on using props in the landscape, but it isn't lighting correctly so just ignore MATTE_TEST.mov
Last reply by zandoriastudios, -
- 49 replies
- 2.8k views
I never did that much modeling characters. I want to start a little bigger(little big? excuse my french) project, so maybe better and safer to own my characters. I have tried to stay with a fairly low mesh density so far, hope it works for animating. Do most people still apply decals on the face using flatten? I used it a few years ago, worked well, but this time I can't find the way to apply the decal in the action window where I flatten the face. I will rig them soon with 2008 rig to test the models. Michel
Last reply by steve392, -
- 1 follower
- 8 replies
- 804 views
I have kind of gotten addicted to making models from Thomas & Friends, So before I go back working on the Nidaros Cathedral I just had to make yet another contribution to his friends
Last reply by TNT, -
- 3 replies
- 430 views
I a taking a new run on this: Lets´say I have down some muscle smile for the right half of my model in a pose. How would I go about creating a new pose mirroring the musclepose to the left side? Probably asked this before, but since I never get mirroring muscle poses in a symetrical model to work, maybe I need some more explanation. Any help anybody?
Last reply by jakerupert, -
- 1 follower
- 26 replies
- 1.7k views
Started working on the Pod Bay interior for the Discover model. To make this model it's own complete set, I am going to include the Pod Bay doors and front wall sections (interior and exterior). The slider to control the doors will be part of this model now, and not the Discovery. So far, I have the rear and left walls modelled (with temporary textures on them). The floor and ceiling are blocked out as well. It's been tricky trying to get everything to scale without having any blue prints to work from, just screen grabs from the movie. The front section with the pod bay door openings, is just a temporary piece so I can get the other parts modelled and scaled in place…
Last reply by robcat2075, -
- 1 follower
- 9 replies
- 674 views
As the title says, this is the linkage used by steam locomotives to allow them to move forward or in reverse. The idea of splining the convoluted shapes and transitions intimidated me so much that I kept putting off starting them for months. But I finally bit the bullet and I think they can stand up to an arm's length inspection. The quasi rectangular frame (which is about 6 ft. long) has a close approximation of the final cast iron texture for all the parts but the Playdough colours on the other parts are just to ease inspection.
Last reply by Gerry, -
- 1 follower
- 50 replies
- 5k views
I decided to take a stab at modeling a 63 vette. So far I just have the dog house, hood, and front tires. It's got a long way to go and a lot of detail missing but it's starting to look like something. I used Photoman's tut on the bike tire to make my tires. It worked perfectly. Thanks.
Last reply by TNT, -
- 1 follower
- 10 replies
- 883 views
Hi! Been a while since Ive done anything major in A:M. So I wanted to once again expand my modeling skills. So to do that I decided I want to model my camera (At least my digital one ). My camera is a Canon Rebel XT. The lens I will model with it will probably be my Sigma 15-30mm F/3.5-5.6, which is a big lens. Eventually I want to model all my camera gear (Film cameras, all my lens, flashes, tripod, etc). I just started the process, the model is in its very rough stages right now: I will post an AO render when there is enough to look good Photoman
Last reply by jason1025, -
- 1 reply
- 849 views
I have a simple question. I am desperately asking anyone if they can share or make some more actions for the Thom model. I have a project I am doing and my models bone structure is build like Thom. Please if anyone can....
Last reply by Rodney, -
Night City
by KenH- 1 follower
- 27 replies
- 2.5k views
I'm doing a "fly through a city" animation. Here's what I've got so far. There's going to be lots of motion blur and movement so these buildings don't have to be perfect, but am I missing anything obvious? Does anything stand out? I'd appreciate any comments. I'm thinking right now there's too many lights and the buildings need to be a little more varied. Thanks.
Last reply by KenH, -
- 1 follower
- 31 replies
- 2.7k views
I'm starting a new project in my (rare) spare time. I'm planning to build a Meganeura, an ancient dragonfly that was extinct a long time ago. These insects had a wingspan of 70 - 75 cm (~ 2.4 ft). I'm not not building one in A:M, I'm building one for real, RC controlled and supposed to fly. Well, actually it doesn't have to be able to fly in our current atmosphere, this is an experiment to see if a dragonfly of this size could fly with the atmosphere pressure as it is now. The reason for this is that some scientists have reason to believe the atmosphere pressure was much higher in those times, estimated about twice the current pressure. I think it would be almost impossib…
Last reply by Paul Forwood, -
- 2 replies
- 437 views
It's been a while since I posted anything... Just haven't had the time to play around. But I'm taking an animation class this semester, so I had a good excuse to start messing with A:M again This is one of the things I'm working on right now. It's not for class, just for fun. I've wanted to do it for a while, and since I left my flash drive with the files for my class project at school, I figured this weekend would be a good time to get started. I'm working on a Chibi-style character. Chibi is the big-head little-body style, like the sprites from the old Final Fantasy games. I'm actually working on an Oppai Chibi character. (Oppai roughly translates as "Busty…
Last reply by brainmuffin, -
- 8 replies
- 1.3k views
I used the dynamic constraint on one of my model characters. It's been working really well. When they walk, certain body parts move almost realistclly. However, the biggest issue has been when I render the walking animation to video file, the dynamic effect stops moveing or does'nt move on the video as much as they moved on the basic action screen mode. I'm wondering is there a certain configuration you have to set in the rendering properties to see the dynamic constraint movements in the renderd video files or is it something else that I'm doing wrong? Any one please help!!!
Last reply by tchamberlain2,
