Work In Progress / Sweatbox
Subforums
-
Showcase (57,343 visits to this link)
-
- 530
- posts
-
A:M Stills (86,668 visits to this link)
-
Works In Progress (WIP) (59,266 visits to this link)
-
- 3.1k
- posts
5,155 topics in this forum
-
- 1 follower
- 11 replies
- 1.8k views
A run-through of an idea i had for New TAoA:M It was going to be the "Ten-Minute Triceratops" but here I am an hour later...
Last reply by robcat2075, -
- 18 replies
- 2.1k views
I had a problem with the project I was working on and trued this. UK residents might recognise the design ? Any comments welcome regards simonBerty.mov
Last reply by robcat2075, -
- 1 follower
- 14 replies
- 1.1k views
Hi, It's me again. I need to freeze a sprite system so a camera can move though it. Searching I found: "Set initial velocity to zero." Hmm... seems to me like in the chor you'd let the sprite system form then at some frame you'd 'set the initial velocity to zero' and maybe 'rate of emission' and 'spin' and ???? as well but this isn't working for me. Of course if I set these values in the material section... nothing happens in the chor (as one would suspect). However, sprite systems are tricky devils and I haven't played with them for many years. Is there a way to do it? And pretend I'm a complete idiot and assume I know nothing (I need where, how, wh…
Last reply by robcat2075, -
- 9 replies
- 3.1k views
Y'all don't need to be drooling over "path deformers" in other programs... A:M's got 'em! D_Box_PathDeformer.prj DBoxPath.mov
Last reply by phatso, -
- 9 replies
- 2.1k views
Well, I havn't shown my face around here in 2 or 3 years, and for those of you that remeber me I was working on the project known as Super Mario Film awhile back. Although that project had died years ago, I decided that I'd finish the first scene of it (which in my opinion was the best scene), and call it the finished product. You can view it here: Thanks to the members who helped create this video: Nunsofamerica the_black_mage thetanman d34th5t4r Chrury Sanson tido totlover Jequed case And if anyone's interested in downloading the models from the video (plus other models such a princess peach), I'd be happy to upload them so that …
Last reply by totlover, -
- 1 follower
- 10 replies
- 1.1k views
A bit more experimenting with cloth. Cape000.mov I thought the cape would be easy since I had the pants working, but it wasn't.
Last reply by Gerry, -
- 1 follower
- 2 replies
- 739 views
Ran a render with a character from Rear Window Project. Rendered in AO with all the bells and whistle, hair fog, shadows etcc 16 b 11:42 frame 17 beta 3 6:42 a frame
Last reply by Darkwing, -
- 8 replies
- 968 views
Ok I have an important video coming up and my most frustrating problem I have had throughout all my videos has been the body mechanics. mine do not quite move like everyone else's. That "aliveness" is somehow missing. I believe it may be I do not work much in the timeline window? I really would like to get up to speed on this. Anything jump out at yall? Gene
Last reply by TheSpleen, -
- 21 replies
- 1.8k views
still have a few finishing touchs to go Working on a AK-47 as well
Last reply by Maniac, -
- 3 replies
- 716 views
is ther a way to give this lamp a glow without lossing Plasma effect
Last reply by Fuchur, -
- 5 replies
- 825 views
I made this hour glass would like to no how to animate sand in it ...look for Tutorial on it could not find one. is this the right place to post this Hour_Glass.mdl
Last reply by TheSpleen, -
- 43 replies
- 3.9k views
Hey everyone, I need to simulate(If possible).....a weighted but Bouyant object in a tube filled with water. It needs to be able to be flipped kinda like a "Sand Timer" and have the bouyant object rise to surface according to real world physics. Is it possible to use Newton Physics in A:M to simulate Bouyancy like this? Thanks so much, William
Last reply by serg2, -
- 5 replies
- 1.2k views
I've been invited to give an advanced tech talk on developing an edi system for healthcare claims in June. It has to be done as a power point presentation, but me being me I don't want to do just an hours worth of slides, so I plan on doing several slides interspersed with the tech speak with some animated slide s. One of them is an illustration of the system as whole as a rube goldberg like machine. This is a test I just threw together of the first piece, which will be an inlet belching envelopes onto a conveyor belt. test.mp4
Last reply by fae_alba, -
- 2 replies
- 618 views
I saw the signature from Terry (Maniac) has a dog-tag in it and looks a lot like one I made last year... wanted to show him my animation- HERE! (I always believe the forum should have more 'show-and-tell' to it...) So, this is an After-Effects/A:M project for a TV show that may have never been seen... kinda of a 'join the Army and you too can become an elite professional' show. ARMY_ELITE_matts_version_small.mov
Last reply by Wildsided, -
- 0 replies
- 542 views
http://www.youtube.com/watch?v=qsoDdRR_-RA...f46RVAAAAAAAAAA I found this and thought "What a wealth of ideas!" Some wonderful CG deepspace effects. And so many of you like the space genre.
Last reply by TheSpleen, -
- 1 follower
- 15 replies
- 1.8k views
Hello, Voting for the v17.0 Mascot is now live. Voting will end on 04/21/2012 at 11:59pm pst. http://www.hash.com/vote I after this wraps I will be posting a poll for the next contest that will end before Comic con. Good Luck to all that entered!
Last reply by robcat2075, -
Worm!
by robcat2075- 1 follower
- 18 replies
- 1.7k views
I saw a demo for a "deformer" plugin for another program and thought, "A:M can already do that..." wormH.mov
Last reply by jason1025, -
- 2 replies
- 541 views
"Cheese, Grommit!" CheeseSlice.mov mp4 version: CheeseSlice.mp4 If you haven't been looking at the "Planetary Clouds" thread there are many interesting doo-dads there.
Last reply by johnl3d, -
- 21 replies
- 2.7k views
Well me and my friend are working on a game idea and the program im using to code with is Unity 3d. I can export models succesfully to 3ds Max files to import into Unity which is great to know because animation master is what I am good at. My first question however is, Is there any way to export animation files from animation master into any other file types that i could possibly use? And i am going to post all the things i model in this topic so you guys can see all of my progress! This first picture is What the game style will be. Legend of Zelda Wind Waker is the inspiration. And if anyone saw me post this first turtle i made in another topic.…
Last reply by totlover, -
Art!
by robcat2075- 15 replies
- 1.3k views
I was trying to get a Jackson Pollock effect... PaintArt.mov
Last reply by kwhitaker, -
- 19 replies
- 1.5k views
Trying to learn lessons from previous post. This is a bit of lip synch leading towards some animation with a female blockhead. I thought I'd try to get this bit right then start working on the body poses and the overall piece. She breathes in just before starting to sing. Any feedback welcome. regards simonMouth_Test.mov
Last reply by Simon Edmondson, -
- 19 replies
- 1.9k views
I ran into this old WIP that I shelved a while back. It wasn't turning out the way I had hoped so I stored it away until I have time to go back and give it another go. Final_Dragon_Shot_.mov William
Last reply by Wildsided, -
- 13 replies
- 1.9k views
I made this panorama and used it as Rotoscope moved Rotoscope (right to left at 00:00:00 to 00:08:00) put model moved on the path (left to right) set camera keyframes to get good perspective (at 00:00:00/00:04:00/00:08:00) created small ground and constraint > Transtate To model set Option : Front Projection Target ON / Receive Shadow ON (for shadow) and Render to Files. (3 Passes) this is loop action
Last reply by thejobe, -
- 8 replies
- 1.4k views
Here's a five second logo I worked on for a friend with the original concept drawing that he provided. I made 640x480, 1280x720 and 1920x1080 versions...this is the 1280x720 version...1.0 gamma, H264 compressed Quicktime. There are plenty of things I wish I had done better, but I think overall it came out alright. animated_logo_1280x720_1.0_gamma_30FPS_H264.mov
Last reply by itsjustme, -
- 2 replies
- 787 views
just messing around thought it was different
Last reply by pelonppp, -
- 10 replies
- 859 views
So I'm trying to build a palm tree....have it nearly where I want it, but am having an issue with the decal for the trunk. After applying it it shows fine in the model window and the chor like so but when I render it looks like this.. Nothing I do will get the decal to repeat properly for the entire length of the trunk. Any ideas??
Last reply by robcat2075, -
- 8 replies
- 759 views
I'm attaching a zip file with a sprite material, a flame targa image, a simple model and a chor. I've been working on this fire material and finally got it to look decent, when it just quit rendering! I can see the sprite outlines in wireframe mode, I can see the sprites in shaded mode, can see them in the chor in shaded mode, they spew out on cue, but they will not render. I'm stumped, I know it's a simple one. FireMaterialTest.zip
Last reply by Gerry, -
- 5 replies
- 3.4k views
v17.0 Public Beta 01
Last reply by Fuchur, -
- 5 replies
- 699 views
In this thread Robert showed me how I can generate an image suitable for normal decals. The image of a cylinder and sphere on a flat plane is his example. Note that the flat plane RGB value is 128, 128, 255. The image of a series of troughs in a flat plane is my first attempt. The problem is that the RGB value for the flat plane is now 112, 112, 255 which shows up as a difference in shading at the decal edge. So I started to debug this and I got an unexpected result. I moved the cylinder out of the field of view in Robert's example, re-rendered and the flat plane RGB is still 128,128,255 but when I put back the cylinder and moved the sphere, the flat plane is n…
Last reply by ypoissant, -
- 9 replies
- 969 views
This started off as just a way to make the specular lighting more pronounced and then it turned into generating a nebula in AM, hope ya like
Last reply by jimd, -
- 1 follower
- 113 replies
- 12.5k views
I am starting a new WIP thread to consolidate everything. I will be posting in this thread as opposed to my old WIP thread. Currently the working title for the film is A Dragon's Love Story. This may change - I'm mulling over one or two other titles. The story in a nutshell: A dragon was once in love with a princess that rejected him. Realizing his treasure hoard no longer brings him happiness and he is leading an empty existince, he heads out in search of a mate. He searches high and low but cannot find one. He is about to give up when he finds love where he least expects it. I imagine completed length to be about 3 to 5 minutes. Both the main char…
Last reply by Roger, -
- 1 follower
- 16 replies
- 1.2k views
Hi! I need to create a sphere whose surface moves (or appears to move) something like boiling water. Looking at animated materials--color-wise it will be black with purple specular so the material will just be 'bump' (I think 'displacement' would be too much render time). I could probably find an animated clip but decaling a sphere and getting it even would be hard no matter how you work it (unfolding sphere, spherical mapping and placement, etc). Any ideas, let me know! Thanks, Rusty
Last reply by rusty, -
- 20 replies
- 1.7k views
I had some time in-between projects and an idea for the 11 second club's provided soundtrack this month, so I slapped together an entry. I don't expect to do well, it's always fun participating tho. The only thing I needed to model was the room to match my vision... the characters and car are all old models from old projects. Now, back to WORK! It will be available to view with all the other entries in early March. http://www.11secondclub.com/ 11sec.mov
Last reply by robcat2075, -
- 0 replies
- 552 views
I mentioned this some time ago in the Star Trek Red Squad thread and delayed opening a new thread up for it until now. So here's the lowdown. With Red Squad, it obviously has it's main and secondary characters with dialogue. The thing is, where this takes place on starships, these guys aren't the only crew members on the ships. So what I'm hoping/asking for, is if anyone has any decently "semi-realistic" heads that they're willing to donate to simply be background crew members who mill about, use computers etc. They could be guy or girl, though I don't have any female bodies built, so you may have to supply that as well, but if all you have is the head, I'll take tha…
Last reply by Darkwing, -
- 1 follower
- 13 replies
- 989 views
Hi! I've never used shadows only but now it can really help me! So, I researched it, did what I thought I needed to do but I'm not getting it to work. Settings Tried: Render to TGA and then to .mov Buffers: Alpha=on and tried off Shadows on Render Options: Quality Final Shadows on then tried off Everything else off Nothing in Alpha buffer or RGB channels I opened the TGA in PhotoShop CS3 and the .mov in After Effects 6.5. I'm using AM V14c Am I missing something? Thanks, Rusty
Last reply by John Bigboote, -
- 9 replies
- 1k views
Hi again, I need to simulate the Aurora around the top of a planet. See: http://en.wikipedia.org/wiki/File:Aurora_B...ace_by_NASA.jpg And with movement (green, white and red swirls with streamers shoup wardspwards): Ideas? Thanks! Rusty
Last reply by johnl3d, -
- 1 follower
- 14 replies
- 2.5k views
This isn't quite what Rusty is looking for in his other thread but I'll show it none-the-less... a fly-over of the Aurora curtain effect. Basically two gradient combiners are used to fade out the top and bottom and in the middle is a turbulence combiner, stretched vertically and animated in the chor to move through the mesh of the curtain to give it the undulating look. AuroraE000.mov PRJ done in v17 but it will work in earlier versions Aurora06_animated_flyby.prj
Last reply by jason1025, -
- 2 followers
- 82 replies
- 8.1k views
It's been long and long since I posted anything -- heck, it's been awhile since I made anything . I have totally forgotten how to do the most simple of things within A:M, so this should be fun trying to get back in. But I'm really going to try to get back into it this time, and I thought what better way than to make my character from my friend's adventure. This character is named Connor. He is a twenty-four-year-old who looks no older than twelve. He has above average night vision, unusual strength for his size, and is skilled in martial arts. Since I'm not the greatest at drawing I decided to go with a sketchy look for my concept. I actually thought it tur…
Last reply by mouseman, -
- 6 replies
- 1k views
I tried a bit of an animation test with one of Shelton's characters, rigged with the A:M 2008 rig, to get in some practice with it (the rig) before the forum project gets started into high gear. This is just what I've come up with this weekend, between other non-animation things. There is no face rig on this character, so the animation is only body mechanics. I'm only mostly done up until frame 8:03 or so. I'm rather satisfied with most of the movement for him getting up, although there are probably a couple of small things I'd clean up after fleshing out the walk off of screen (listed below). After 8:03, there is just gross body movements that approximate walking …
Last reply by robcat2075, -
- 10 replies
- 1.3k views
Still plugging away on the blockhead figures. This is the most recent animation test. You'll spot its intention... I begin to realise that I am hitting my limits as an actor ( and the threshold was low to start with ) so I may start to take lessons accordingly. Any feedback on the animation would be most welcomeTest.mov. For me the biggest problem is the mouth shapes. The style of mouth chosen does not permit of enough variety of shapes so I will have to work on that. On a related question to that. It is possible to paste parts of one model into another, eg an ear or eye but, is it possible to paste the mouth poses of one into another if the style …
Last reply by RU2D4, -
- 27 replies
- 2.8k views
A:M has been my main hobby for almost 19 years. (My oldest copy of the render module, render.exe, is dated Feb. 26, 1993). Over that time A:M has improved and I've learned a lot about modeling, texturing, lighting and observing the real world. Now that I'm getting comfortable with my new hardware, Win7_64 and v16 I've decided to go through every one of my models to bring them to a consistent level of craftsmanship. The first model to get an upgrade is the brick facade of a warehouse-like building. I don't usually keep old renders but in this case I have the warehouse from: 2001 - Toonation Brick Plug-in, simple lighting model, procedural sky, incredible day-glow colo…
Last reply by Simon Edmondson, -
- 5 replies
- 650 views
Hi, This is an easy one I've forgotten and searches are coming up empty. My rotating asteroids seem to accelerate during the rotation. This has something to do with the interpolation or something like that... I just can't remember what it is or, where or how to change it. Thanks, Rusty
Last reply by mtpeak2, -
- 6 replies
- 639 views
Edit: No need to try this anymore. I have ascertained enough to send a bug report. Thanks! load this PRJ, select the camera view (number pad 1), and select model you see there. Switch between Director mode and Skeletal Mode. Can you see the shade thru the window in both modes or just one? CantSeeThruGlass.prj What graphics card do you have?
Last reply by NancyGormezano, -
I like polar bears very much and like that I started to model a male one two days ago. (these guys can be up to 3.60m from head to bottom... don't wanna fight with one ) Today I am close to start texturing (he still needs claws and teeth) but before I do that, I wanted to know if someone has advises for him so I dont have to re-texture him later on. Let me know what you think . See you *Fuchur*
Last reply by Fuchur, -
- 1 follower
- 8 replies
- 868 views
I would expect color change along the hair length to be gradual but it's not. Am I doing something wrong?
Last reply by mtpeak2, -
- 9 replies
- 1.2k views
I haven't used AM too much since I still have 15j on the CD and 16 didn't offer any worth while stability fixes here. Wondering if 17 is coming out soon? If so is there big fixes on the windows version for display refresh and over all program stability? Attached is one of the files that died on me Lock.zip
Last reply by robcat2075, -
- 41 replies
- 3.4k views
I think this image works to sell a bottle of something, what do you think? If you stare at it for more than 5 seconds, it might work in advertising?
Last reply by RU2D4, -
- 17 replies
- 1.7k views
Hello Started working on Angelina Jolie just for the fun of it to see how real I can get it.
Last reply by Rodney, -
- 1 follower
- 8 replies
- 1.5k views
After over a four year departure I have finally got around to revisiting my 'Bella Bear' project which some of you here might remember :-) I have taken one of my favourite shots from the short Bella Bear film I made back then and started to rework it following my spell at Animation Mentor and having worked on a few small film projects. Here is the original: Original And here is the newer version. Revisited It went a bit wonky at the end cos I added a refraction index to the glass on the spaceship of 1.4, but it is entertaining even if it isn't quite right. Better? I will be tarting things up to try and make it more showreel worthy over t…
Last reply by robcat2075, -
- 25 replies
- 2.2k views
My friend and I are working on a project (have a look: http://www.hash.com/forums/index.php?showt...+Trek+Red+Squad ) and we are using two different programs. I use 3ds Max 2010, and he uses A:M v16. My question is this: has anyone used ResErect to export models between any version of Max and A:M v16, and if so, how well does it work? Any help would be much appreciated
Last reply by Elm,