Work In Progress / Sweatbox
Subforums
-
Showcase (57,501 visits to this link)
-
- 530
- posts
-
A:M Stills (86,790 visits to this link)
-
Works In Progress (WIP) (59,403 visits to this link)
-
- 3.1k
- posts
5,156 topics in this forum
-
- 52 replies
- 4k views
Hi, got an idea for a new project!! Ill see if I can upload a sketch but it involves an ocean shore with 2-3 large rocks and various small ones as the focal point. Grass and maybe a old beach chair or fence in there too. I have some of it done (see pic). I need to work on the sand texture/shader. I really want it to look real so I'm going to be spending a lot of time doing that.... The rocks are going to be a modified version on the one I used on my previous project. The water was kinda interesting to do. I had to adjust the transparency and reflectivity to get the right look. I wanted to use the Index of Refraction, density, and transparency settings for more realistic w…
Last reply by robcat2075, -
- 1 follower
- 7 replies
- 538 views
I just re-opened the .prj doc. for the Albatros fighter and the DH-2, only to find massive decal loss on both. The textures are present in the PWS. Their icons are showing in each entry in the decals folder. Where do they go? Is there a way to stop it?
Last reply by Kelley, -
- 6 replies
- 870 views
Hey everyone, most of you who know me know that I have mostly been posting in the topic Super Mario Film, but now I feel less inspired to finish it. Lately I’ve been feeling more creative, and working on a project that was a spoof of nintendo’s super mario brothers didn’t feel right. So I decided to bring the project I had been working on before back to life. Three years ago I started having an idea for a show that featured 8 characters who lived near each other on an island, and they would do all kinds of stuff. Over the years I’ve come up with tons of funny ideas for the show and developed the characters so much that now they feel like a part of me, and it wou…
Last reply by Jequed, -
- 3 replies
- 512 views
(couldn't think of a good 3 or 4 word description.) I've got an animation three seconds long. The turret from one of the armored cars bounces and rattles down the tunnel and comes to a stop at the three second mark. [make a keyframe] Then it sits there for five more seconds. [make a keyframe at 8 sec.] But when I render it out, it takes the three sec. segment and stretches it to the full eight. What's going wrong?
Last reply by KenH, -
Cartoon Goat 1 2
by TNT- 2 followers
- 52 replies
- 4.7k views
I thought I would try my hand at modeling a silly young goat. I wanted an curious, innocent look. Best intentions but able to get into trouble. Like a typical kid. I just added a little color with diffused color. Let me know what you think of the head.
Last reply by matt_stanford, -
- 11 replies
- 743 views
Ok...so it's not gonna be the next Woody or Buzz...but hey, its my first A:M character and I'm kinda proud of him. Still loads of work to do (getting rid of that horrible beard and using A:M's hair system, sorting out those legs, teeth, tongue, bones...argghhh!!!!). LOTS of work!!! For any other newbies out there I highly recommend David Simmons eye tut (and I was <ahem> slightly inspired by how he did Bertrums belly!) Let me know what you think.
Last reply by matt_stanford, -
- 57 replies
- 6.6k views
It's been a long long time since I've posted any personal work - and I have now started re-fooling around (got my ver 15 back - woo hoo - me happy camper) - Here's the start of a character that I will probably use in one of the short animations I have in mind to do. The character is a modified Ork model being used in Scarecrow of Oz - designed by Alain Desroucher, modeled by Ken Heslip, rigged by Mark Skodacek, modified, textured, feathered by me. it's not finished. My intent with doing a sequence of short hopefully humorous vignettes is to develop & loosen up my animation style, and get a better grasp on short (1-5 minute) story telling via pantomime, o…
Last reply by NancyGormezano, -
- 1 follower
- 21 replies
- 3.1k views
Hello, My name is William and over the years I have been modeling and animating with AM. I recently 3D printed this guy out, (WIP). I also have been using hash to produce foam prototypes for the past year for local designers. Please let me know what you think. warm regards, William
Last reply by tbenefi33, -
- 1 follower
- 48 replies
- 4.2k views
Hi guys and gals. I haven't gotten to use AM for anything creative in a bit and was really starting to feel the lack of creativity in my life.. So this Sunday afternoon after church I sat down and started working on a character just for fun. And I was reminded once again why I don't use anything other than animation master... and how wonderfullly easy it is to just make stuff!
Last reply by buddy, -
Hello friends I want to show you the latest collaborated animation done for Atmel. This is part two of the MCU teasers, part one can be found here. Its a combination between 3D objects and 2D environment Please let me know what you think Best regards Stian XMEGA animation please be patient, the file is 30MB Credits: Runar Finanger - After Effects/Environment/Editing Eivind Sivertsen - Sound Design/Story Stian Wahlvåg - 3D/Animation
Last reply by NancyGormezano, -
- 7 replies
- 551 views
Here's the first half: a red Albatros. [a DV instead of a D III] Now, on to the DH-2.
Last reply by Kelley, -
- 32 replies
- 3.4k views
Hi! I decided to move this over here so that it would actually be in the right subforum. Here is the link to the original: http://www.hash.com/forums/index.php?showtopic=34739 So continuing, I finished everything for the most part. The render problem I had had fixed itself* so I double checked everything and did the final touches, tree here rock there. *NOW, my rendering problem is that every 4th pass won't render. What I mean is that everyother pass is about 47minutes (3000x1600) and the 4th (4 out a 5pass) just keeps on chuggin for about nine hours. Stuck on rendering hair..... SO... I guess I'll just setup a AA render and call it a day. Here are some more s…
Last reply by photoman, -
- 15 replies
- 795 views
Lately I'm getting a lot of garbage with Alpha's and Bump Maps. The artwork is clean. Regular decals go on as they should. Any thoughts? [the Albatros is an Alpha Channel, "iClapper" is a Bump.]
Last reply by robcat2075, -
- 6 replies
- 606 views
Ihave been trying a runn cycle but finding it much harder than a walk.Is there an easier plan to this running.mov
Last reply by phatso, -
- 2 replies
- 493 views
In my new scene, i am made a character, and a car, please could some one explain the best way on how to constrain th hand the steering wheels and the car to a path. As in the hand in the steering whels has to be in ciclar rotation. any help please
Last reply by HomeSlice, -
- 29 replies
- 2.2k views
Hi friends ... I decided to participate in the 11second contest in this month... probably I'll use the Sam as main character, and the secondary character will be a dog. I modeled/textured the dog this morning and here is the result.
Last reply by nino banano, -
- 5 replies
- 587 views
Who is the 3D computer animation equivalent Dickens, Edgar Rice Burroughs, or Steven King of our age? It seems those with serial staying power may be able to win that title for a day. Serialization has been a particularly capapable benefactor to creators of literature, film, comics, cartoons, and animation and other media over the past two centuries. No time to be idle: the serial novel and popular imagination, by Shawn Crawford (1998), is an article I propose may give a little insight into how modern day storytellers can control the passage of time and distribute animation through the internet to reach their intended audience. Its a historical look back t…
Last reply by Rodney, -
I took a break from rigging Kong to work on another great ape. Avalanche Software donated the orangutan model to the extra DVD (and other models), but it had no hair material. So far this is what I have. I haven't done any grooming yet. Any "grooming" look you see is through the dynamic settings. Still need to adjust the length and density in areas and adjust the hair group. I'll probably never get it to look as good as Avalanche, but I'll certainly try. There's also a monkey which I may do as well. I don't know if I'll rerig him, but he's in desperate need of a hand gizmo.
Last reply by mtpeak2, -
- 12 replies
- 1.2k views
I'm trying to make headlights on a truck using two Rim lights. However, to work, they need to be Volumetric lights so I can see the projected light cones. From the moment I turned on 'Volumetric', they were out of sync. I cannot get the light on the left [our left] to throw a beam as far as the right. Last night the left looked more like a yellow plastic cone and the right had dark banding in it. Both are more well-behaved this morning. I'm looking for something like the light on the wall [streetlight] which, in itself, is was an adventure of chasing numbers. Seems even the size and shape of the Rim light has a huge difference on how the light projects. Is Volumetric…
Last reply by Kelley, -
- 2 followers
- 74 replies
- 14.5k views
Will Sutton's Kong model is a great model. Awhile back I rerigged with the squetch rig, but when I imported the model into the rig, I lost the hair grooming (which is fixed now). Well, I finally came back to it and I redid the hair on the character. Unfortunately the squetch rig is an older version, so I'll rerig again to update it to the newest version once I get the hair right. The original Kong model looked a bit puffed out to me with hair turned on and rendered. So, I made a few changes to the model to suit my taste, most of it was to the hair material. Here's what I have to far.
Last reply by Shelton, -
- 0 replies
- 387 views
Just trying the rigg out to make sure I got it fixed ok ,sorry its a bit big exersize.mov
Last reply by steve392, -
- 20 replies
- 2k views
Usually it does. But on my laptop, it doesn't. I try to 'paste' into the Paint program, and nothing happens. Does A:M have an internal way of saving screen snapshots?
Last reply by pixelplucker, -
- 4 replies
- 842 views
Nothing really fancy, just blocking out some animation and figuring out lighting, textures, etc. http://www.youtube.com/watch?v=SbxnOFebxWc Here a little info: Still working on V9.5, still facial capture by hand (at least for the basic blocking of the animation), very basic materials. I hate the first scene (too "noisy") second one is pretty good, third is alright, fourth I just started and very rough and final is just a test. It really all is just a test at this point. Please let me know what you think and would do differently. and here is a still render (Lent starts soon) God bless ya'll!
Last reply by animas3D, -
- 7 replies
- 649 views
Over the last two months, I have, on three occassions, found models missing from the Choreography. They are still present in the Objects, and in the PWS. They are still lisrted among the Choreo. objects, but do not appear in the actual set. In this instance, the Armored Car is gone. Before that, both self-propelled guns were gone; before that, one of the troopers. Has anyone else had this happen?
Last reply by Kelley, -
- 10 replies
- 886 views
Got something not quite right here me thinks Untitled.mov
Last reply by steve392, -
- 28 replies
- 2.7k views
finish a Paid work ( Character Designer and Textures) - AZTEC MUMMY really nice make it in Animation Master
Last reply by TheSpleen, -
- 6 replies
- 882 views
One of Many models I am working on for a personal project: It was inspired by the following image. Plus Crabs, Spiders and Turtles. Feng Zhu inspiration Here is afront leg about 2/3 modelled. I will take any constructive criticism OTHER THAN: Too many patches, I would have used a 5 point patch, etc...I model the patch style I do and I'm content.
Last reply by UNGLAUBLICHUSA, -
- 1 follower
- 12 replies
- 1.4k views
Took High res pics of a mac book pro, stretched out some stock primatives, and rendered with ambient occlusion. TPG_laptop.mov
Last reply by jason1025, -
Hi All This a model I have been working on for the last wee while, it's going to be a Victory motorcycle. I have started to add some colour to the model and I'm in the process of making the metallic/pearl paint for the tank and rear fender. All crits welcome, this is the first time I've attached pictures to a topic to I apologoise in advance if they don't turn out right. Glenn
Last reply by nino banano, -
- 22 replies
- 1.6k views
Well, maybe not completely...just a change of pace from The Sentinel. [The house at the far rear seems to have lost its textures, but that's for tomorrow.]
Last reply by Kelley, -
- 1 follower
- 3 replies
- 655 views
From Devil In The Drain my thesis project that goes on and on..... Sc8.mov Sc25a.mov
Last reply by dawgking, -
- 1 follower
- 11 replies
- 1.1k views
Just wanted to show off some examples of hoe I use AM for product design and prototyping. Bell1.jpg is a product called "The WaterPixie" (patent pending) that I have created a Rapid Prototype of see waterpixie_Open.jpg The WaterPixie is an ornament you use to water your christmas tree with. No more crawling under the tree. HA! Any way production will be happening end of 09 - 10 for sale in stores christmas 2010.
Last reply by 3DArtZ, -
- 16 replies
- 1.8k views
I've always liked the squash and stretch look of the Veggie Tales character's eyes and wondered how to do it in A:M. There were several posts on this forum showing how it was done with distortion boxes so I gave it a try. Very cool... then it made me wonder if the same technique on a generic round character head would make it easy to generate a bunch of unique characters very quickly without having to do any rerigging or remodeling (other than a new distortion box). After a little experimentation I came up with a design that works pretty well in most deformations - except for really extreme stretches. The example video shows one model instanced three times in t…
Last reply by strohbehn, -
- 3 replies
- 676 views
Hello everyone! Just would like to use this as a short introduction and show off what I am currently working on. I moved 3 years ago and JUST NOW found my A:M that I thought was lost! I use V9.5. It's actually partway stable, that is once you develop the "sense" (of when it's gonna crash). I'm thinking about getting the newest version (like what, 15..?). Is it stable now? Still crashing like crazy...? Anyway, here are some things. I am fooling around with 3 cartoon heads from a website I am designing/maintaining. I get paid for it, but it's not my primary occupation. You'll see the three guys on the website here http://tresjosestexmex.com/ And here…
Last reply by John Bigboote, -
- 1 follower
- 27 replies
- 2.9k views
Not sure where to put this post since it technically isn't a work in progress but a completed work. Tried to upload it to the gallery, but process stalled. Anyway, enjoy. http://www.decksawash.net/eggs/eggs.html Alan
Last reply by NancyGormezano, -
- 2 replies
- 426 views
Sometimes when making a 5pt patch there are bad cp's where they render as dark spot that renders bad. Is there something dumb I'm doing? Is there a work around? Still learning here.
Last reply by pixelplucker, -
- 7 replies
- 614 views
This is a Problem-and-a-half. The main question is How to use Forces, the 'half' is 'Why Has My @#%* Snow Emmitter Stalled?' Starting with the 'half', it's a straightforward Streaks Material dropped onto a single-patch plane. It's worked before. Now, no matter what value I enter on the Y-axis the snow doesn't want to fall. The main question is how to employ Forces. I got a Force into the Objects Folder and then to Choreography. In its Properties, it looks like any light. I set the height and cone. In the PWS, Force looks like a vehicle for adding Turbulence. I chose Cell Turb and punched in some trial values. Am I on the right track here? Seems too simple. LANDSCAP…
Last reply by robcat2075, -
- 1 follower
- 27 replies
- 2k views
I accidentally first posted this in the tutorial section ..so it is being re-posted here.. Hello- Does anyone know if Sprites can be effected by Forces? I haven't been able to get that to work... Question 2) Does anyone know if Sprites can be contained inside another shaped object once they are emitted? For example, once sprites are emitted, can they fill an invisible object so that as the sprties accumulate, a form takes shape? Here is a clip from the second Narnia movie that got me thinking about this effect. It appears there is a quick cut between the particles floating and the humanlike body that they become.. Thanks for any feedb…
Last reply by Tom, -
- 2 followers
- 22 replies
- 2.3k views
This is my first serious attempt to a full character model in AM, lots to learn but getting there...
Last reply by steve392, -
- 4 replies
- 771 views
other attempt of animation of base, of a ball. link Now I will look for in the next animations, to animate a biped model. Initially I thought about the model of Thom with the 2008 rig seen in some posts little by little!!
Last reply by zeus1972, -
If you create an action for a model in one project and then in another project with the same model the action should be able to work in that new project. Right. It didn't want to work in the new project is there a reason for this or does the program not allow it.
Last reply by robcat2075, -
- 7 replies
- 858 views
Playing around with hair on this model ,I need to learn it a lot more I think
Last reply by Nuba X, -
- 6 replies
- 858 views
I need some help on a few things. First~~ The control system of this short range light fighter. I have two extended panels for interment panels or tech readouts but I'm not sure of how to have steering controls mostly what type. Second~~ My material creation still sucks and I was hoping that some one had a material or a quick tutorial on a good space ship hull material. Third~~ Well...I thing overall the design is good but some second opinions would be good
Last reply by rusty, -
- 1 follower
- 1 reply
- 498 views
Howdy all A.M.'s rendering of bump and normal maps is quite good. To all the newbies (I'm one too.) texturing in A.M. is fairly easy to learn once you understand decaling in A.M. sense. I use a combination of 3D painter and some 2d work. Also Shader Map Pro to produce the bump and normal maps from the texture map. I hope to make a texturing tutorial for newbies in the near future.
Last reply by bighop, -
- 6 replies
- 449 views
Hello all- I have a sequence of 26 images that I am using as sprite particles. Two questions that I haven't been able to figure out yet: 1) Can you make each image being used as a sprite last longer that 1 frame? 2) Can you make the 26 images cycle over and over? At the moment, after frame 26, the animation just uses the last image and repeats it to the end... Thanks for any insights!! Tom
Last reply by Tom, -
- 1 follower
- 3 replies
- 881 views
Wasn't sure if people visit my small section of the forum. I tend to get... weird over there. However this thread is very safe and unpolitical . Yes, I'm tooting my own horn. We all like external gratification. (It's probably statements like that that scare people away from the Verns's World forum. ) I just added a new test of the stage crash on the last post. http://www.hash.com/forums/index.php?s=&am...st&p=260577 I plan to have this short animation done in time for the NYCC (NY ComicCon) which Hash will be attending. I will be there myself most likely with some members of the MAAM group on Sat the 7th. I am plowing ahead full steam on this and will…
Last reply by jason1025, -
- 11 replies
- 1k views
This it one of the very first projects built in A:M. I made some serious mistakes which conspired to slow the modeling, and the renders. First of them was that as I built things in the Modeling Window, I applied the textures as I went along. If, like with a wood beam, I needed this object several times in several models, I would copy it and paste in place. All well and good, except for the fact that A:M loads another copy of the texture. As I duplicated the bits, I ended up with a phenominal number of textures in the Textures Folder [to say nothing of Groups]. Another less-than-desirable aspect of A:M is that if a project sits idle for a few months, A:M had difficulty fin…
Last reply by Animus, -
- 23 replies
- 1.3k views
This is a model Im working on with the light rig ,still got some smart skinning to do but I think its nearly there.The rig works well .I will try particle hair aswell soon w.test_2.mov
Last reply by robcat2075, -
- 1 reply
- 333 views
I've posted a few Sentinel pieces on my Blog. http://kelleythennow.blogspot.com/
Last reply by johnl3d, -
- 1 reply
- 454 views
The spitball rock on which the Sentinel spends his time [his life?] is pretty much devoid of life, but there are large, torpid, harmless beetles in the snow areas. They appear as rocks poking out of the snow until Beast wanders too close and they slowly start to shuffle away. Occasionally, one cannot move out of range fast enough and will rear up and make ritual threatening gestures, then sink back out of sight. BEETLE_TEST.zip
Last reply by Gerry,
