Animation:Master
News and Information
Subforums
-
- 143
- posts
-
- African grey?
- By Fuchur,
934 topics in this forum
-
- 4 replies
- 624 views
Hello- I was playing around with hair and decided that because of the complexity of the final model, I would create the hair separately as another "object" and then copy, paste it onto the final model when the hair was groomed perfect. That seemed to work OK when the Hair was a "material" that was applied to model "patches" however, when I tried the same thing using hair on a SINGLE spline with a "Shag emitter" material applied it only copied the spline and NOT the hair "Shag emitter" with it. Has anyone else been able to copy, paste a SINGLE spline with a shag emitter applied, from one model window to another successfully? The benefits would seem to b…
Last reply by Tom, -
- 1 follower
- 3 replies
- 978 views
A question for anyone whose has worked through some of the exercises in "Animation:Master - A Complete Guilde" by Rogers, 2007: In chapter 4, "Action Basics", on animating the flour sack in an Action window, after you lay down the basic "hopping" animation, the author instructs you to refine the action using Muscle mode and doing some overshoot of the "ears". The idea is to use the "group" tool to select a single CP at the tip of the ear, and then use the "rotate manipulator" to lag the ear behind the fast motion of the torso. If I understand correctly, you are supposed to move the pivot of the rotate manipulator to the "base" of the ear, so you can rotate …
Last reply by sb4, -
- 0 replies
- 1.6k views
You can now upload the videos and they should play like they use to. After the 'hack' I did an update and reinstall when we first got the software it was not working so I had clip-share log in and fix it. They never told me what they did and if an update would break it. Well it ends up the update did break it the use "-vop" not more supported "-vf" so it's fixed and if there is an update again I will remember to check that. Now I just need to get the YouTube uploader installed again and that will be done and I can get back to vintagefilms. I sent a email to the people that lost videos in this since the master was lost too.
Last reply by Jason Simonds, -
- 5 replies
- 973 views
Can anyone else do a shaded render to an image sequence in v17? I'm always getting "Failed InitboundRender Info"
Last reply by Fuchur, -
- 4 replies
- 800 views
When I bake a surface is there a place to choose its resolution ??
Last reply by Xtaz, -
- 11 replies
- 1.2k views
I am about to upgrade to V17 and presently run an Imac. My understanding is that 64bit is not available for the Mac as yet (?) but wondered what the advantages of 64bit over 32 bit are ? The reason for the question is that, if the benefits are worth while I was thinking of getting a PC laptop with W7 64bit and either getting my brother ( techy to the extreme ) to make it dual boot with OSX or use it to render work made and animated on the Imac. I hope this is not an inappropriate Question. regards simon
Last reply by markw, -
- 3 replies
- 782 views
Hi when i apply a decal in version 17g or any version of 17 I can not see the decal unless i do a quick render In version 16 I can see it without doing a render I'm on a mac not sure if this something to report or if its something else thank u j
Last reply by jimd, -
- 2 replies
- 639 views
So, I've isolated one side of a model by hiding what I don't want to effect. Next I opened an On/Off pose widow and flattened the mesh. Then in the pose window for the popup contextual menu and looked for New > Decal but can't see it anywhere? Have I missed a step somewhere or something?
Last reply by markw, -
- 6 replies
- 917 views
I don,t kno where ells to put this so sorry if its wrong , Im trying to import a obj model as a prop but getting a crash everytime as soon as I click ok on the information window that comes up .I have triede small files aswell as larger ones ,it works fine in v16 but not 17 c or 17e .I want to use it to make a new model with the new tool in v17 .Any help or advice would be very welcome cheers Steve
Last reply by John Bigboote, -
- 14 replies
- 2.5k views
Wasn't sure where to post this so I posted it here as I will be refering to AM. GPU rendering. Is it faster and if so are there any plans to incorporate this feature into AM? If it was implemented I would pay a little extra to get the functionality. I think GPU rendering, if faster, would be worth more on the over head price of AM. ...any thoughts???
Last reply by Fuchur, -
- 2 replies
- 781 views
Today I find myself in a real mess. I renewed my subscription because my old has one day left. And I get this error everytime I try to render my project in any file format. Now even my previous versions are giving the same error message. So I'm treading water here with no rendering capability. Please tell me that the rendering ability in A:M is not screwed up now.
Last reply by Rodney, -
- 0 replies
- 740 views
Hello Everyone, I know that new videos on amfilms.hash.com do not play for some reason. I do not know the reason at this time but I will soon. But it will not be till Monday 03/04/13 till I can take more of a look at it. Since we are packing right now for ECC. I have also been slacking on working on the old films site but when I return I'm going to have another go at it. It is just one of those projects every time you try to get into it. There is either something better to do or something you can make more head way at. But I know it would be good to get it running. We were also taking about adding re-links from amfilms.hash.com to vintagefilms.hash.com to fix some ol…
Last reply by Jason Simonds, -
- 3 replies
- 856 views
pretty simpal for an object to shatter do i need to make 50ish peices of said object or is there a tool that will do this for me
Last reply by johnl3d, -
Yeti vs Oz
by sb4- 9 replies
- 1.1k views
Can anyone tell me what is the difference between the "Yeti" A:M CD and the "Oz" CD? It seems they are both V13, is that correct? Can they both be upgraded to the same version? -SB
Last reply by Rodney, -
- 7 replies
- 1k views
Hi friends ... I must have missed something in V17(e) then where is the option REMOVE FROM GROUPS ???
Last reply by robcat2075, -
- 1 reply
- 517 views
Hi there, i got my subscription just a month ago. Now it seems more and more likeley, that i have to reinstall (recover) my computer. Will i be able to reinstall my AM Subscription after i reinstalled (recovered) my windows pc? Best regards Heiner
Last reply by Fuchur, -
- 1 follower
- 7 replies
- 900 views
Being the impatient person I am, have never really got around to SSing properly. In order to improve, that needs to be addressed so, have watched a couple of useful tutorials on how to do it, and tried the exercise in TOAM. My question is, How much can be put in one SS relationship ? For example, The hand bone is rotated through 90degrees ( in the Y plane ? ) as if to say 'Stop". The SS is then set. If the hand bone is now rotated ( in the x plane? ) , as if to give the thumbs down. Does that require a new SS, or can it be incorporated into the first one ? Hope thats a clear question . regards simon PS Supplemental Using the 2008 ri…
Last reply by robcat2075, -
- 1 follower
- 3 replies
- 815 views
Can someone answer some questions about A:M versions? 1. Which is the last version that employed a standalone CD that could be used as a key with any computer (i.e. portable)? 2. Which is the first version that uses the new XML file formats? 3. Which versions can convert the old file formats to the new XML file formats (i.e. read the old, write the new)? Thanks, -SB
Last reply by Jason Simonds, -
- 2 replies
- 543 views
Working away on a scene in a chor with two figures and having a minor, if irritating problem. Working in Skeletal mode. If working on A and I click just off the bone, it is reverting to the model bone, and then won't allow me to select the intended bone in the window. It has to be selected in the PWS. or I don't click exactly on the intended bone and it selects Figure B instead. Again, it won't allow selection in the window, the shortcut to model has to be chosen in the PWS. Is there a way to isolate the selected model so you can only work on it, until you need to change selection? I've deactivated them in the past and that works but, this scene …
Last reply by Simon Edmondson, -
- 1 follower
- 2 replies
- 743 views
I think I saw that the simcloth feature was introduced with A:M V12. I have the 11.1i upgrade to AM:2004 (Orangutan). Since this seems to make it technically AM2005, I am wondering if there is a simcloth plugin that would be compatible with my version. Simcloth seems like it would be a very useful feature for my current goal of using my old A:M for concentrating on efficient 2-D animation, emphasizing storytelling rather than virtuoso animation technique. I'd also be interested in hearing ideas and experience from anyone focusing on 2-D animation with A:M. Regards, -SB
Last reply by sb4, -
- 6 replies
- 750 views
Having a strange problem I've not encountered before. running V15 on OSX 10.68 Built a simple set for the current short, all straight lines. They were all scaled in the respective axis to make sure they were straight and level, then peaked. Model was saved. When I open the model in the next session the splines have reverted to non peaked. Redid that and re saved. This happened several times yesterday. Today the problem recurred, so it was reset again. This is what it looks like in the model window. But, when I go to the chor The model looks like this Has anyone else had this trouble and, if so, how can you fix it ? regards …
Last reply by steve392, -
- 1 reply
- 563 views
Today via Skype I got to visit with forum member Roger. We were trying to ascertain why he was having so much trouble accurately placing new key frames in relation key frames he's already made. What we discovered was that A:M was not updating the view window to match what the time counter was indicating. It looked normal if you just hit play, but if you scrubbed the time control forward or back it would stop with the last frame you scrubbed through and not draw the current one. For example if you were trying to get to the frame where a bouncing ball has just touched the ground you would have to scrub to the frame after that before you would see the ball actual…
Last reply by strato, -
- 1 reply
- 1.2k views
Imagination Technologies has come out with a couple of real-time raytrace graphics cards including the Caustic R2500. They are a bit expensive at the moment, but I expect they will come down over time. Is there any interest at Hash in adding support for these in the future? It would provide a great capability for previewing animations. You can read about them here: http://arstechnica.com/gadgets/2013/01/she...y-tracing-card/ -Vance
Last reply by robcat2075, -
- 10 replies
- 3.3k views
Hi, Im new to A:M. Infact i havent started yet. I have some experience with other programs, Autodesk and 3D coat. I want to make a Unity game and wounder it that is possible with A:M? All the post ive searched seams to look like its no way to export from A:M to fbx? Is this so, and is this going to be implemented in the future? This is really importent for me to know before i go any futher with A:M. Sins Dyrwoolf
Last reply by JohnArtbox, -
- 1 follower
- 10 replies
- 1.7k views
After seeing Soulcage's wonderful renders and lusting after GPU rendering speeds, as well as some of the non-character tools in other packages I finally spent a couple of days on the export and render pipeline from AM to Blender and it's cycles GPU renderer. Bearing in mind that my knowledge of blender is minimal at best, it was surprisingly easy. I exported the model as an obj file and then exported the matching mdd. In Blender I imported the same. turned on the cycles renderer and pressed go. RomanJump.mov
Last reply by JohnArtbox, -
- 8 replies
- 883 views
lighting.mov right click then
Last reply by johnl3d, -
- 0 replies
- 572 views
I'm using the 3d connexion space navigator with the "Anywhere" driver and noticed the Zoom and Pan up/Down seemed to be transposed. Zoom functions as Pan up/down and Pan up/Down functions as Zoom. Not a big deal but just didn't notice it before. Anyone have the regular space mouse driver? This might be specific to the anywhere driver. Anywhere Driver is here: http://www.3dconnexion.com/supported-software/anywhere.html Curious. Thanks
Last reply by pixelplucker, -
- 1 follower
- 3 replies
- 804 views
Yippee! The paperback version of "The Spiral Slayers - Book One: Encounters" will be available on Amazon in 5 to 7 days. Versions for Nook will appear in February. Work on "TSS - Book Two: Countdown Armageddon" is well underway, estimated publication is for the Fall or 2013. Get a sample at http://www.amazon.com/The-Spiral-Slayers-E.../dp/B008STATCO/ See the Animated Book Trailer at http (created with A:M) at //www.youtube.com/watch?v=zQ3Gk4Fto0o Happy New Year! Rusty
Last reply by ptiversen, -
- 1 follower
- 1 reply
- 565 views
May this year bring awesome inspiration, improved expertise and awesome animation to you and A:M! Rusty (User since 2002)
Last reply by ptiversen, -
- 2 replies
- 560 views
Animating in an action window, I am working on a sneak got a little carried away and introduced an action object. I'd like to save the animation on the action object as a separate file , to be later brought into a chor. Is that possible and, if so, how do you do it ? regards simon
Last reply by Simon Edmondson, -
- 3 replies
- 685 views
When I first upgraded to V17 I happened to mention to the very nice sales guy that I was getting a new notebook in a week so I was going to wait until it came in. He said 'no, go ahead, put on your current notebook and when the new one comes in we'll just switch it to that'. I KNEW I SHOULD HAVE WAITED. I've followed the instructions, sent them the numbers but, I've trying for days and I cannot get anyone to send me a new activation number and...I'm sick in bed and I need it.
Last reply by rusty, -
- 2 replies
- 500 views
John, thanks for the idea of using mirrors--saved my ass!! Currently I have a cube of mirrors surrounding my 'energy spheres'--I thought that the cube would need to be constrained with the camera but that looked weird. It looks good now but I was wondering if a sphere shape would work better but that would distort the energy spheres huh. Anyway great tip!!
Last reply by rusty, -
- 0 replies
- 466 views
Good attempts John...Thanks but not what she wants. I've posted some my attempts on You Tube I think they're close but anymore ideas would be awesome! http://www.youtube.com/user/zRusty1?feature=mhee Rusty
Last reply by rusty, -
- 2 replies
- 574 views
I just stumbled across a new keyboard shortcut I'd never known about, so I don't know if it's new or just under-documented. If you select a cp on an object, then hit slash to select the object, the pivot is automatically set at the physical center of the selected cp's. BUT, if you then hit Ctrl-Z, the pivot moves to the first cp you selected! This is fantastic, never seen it before but holy crap! Another great one I learned from the Barry Zundel tutorials, is a version of hitting Y to create a cp at the midpoint of a spline. BUT, if you click just a tiny bit PAST the end cp of a spline and hit Y, a new cp shoots out the end of the spline exactly half the distanc…
Last reply by robcat2075, -
- 1 follower
- 15 replies
- 2.3k views
Hi, I'm trying to persuade some people into getting A:M. I remember a video that demonstrated A:M; it gave an overview of the software, it showed how intuitive it was, showed how you can just drag/drop an image onto a model, showed examples of people's work. Does anyone know where this can be found? Thanks, Rusty
Last reply by Rodney, -
- 9 replies
- 1.7k views
Hi, It's unfortunate that AM changes the windows display settings...V14 did not but I guess for some reason V17 has to? I thought AM set them back upon exiting but for some reason I stuck with out the 'transparency' of the window frames (whatever that is called). This should be a trivial point but I guess I've gotten spoiled. How do I change them back? Cheers, Rusty
Last reply by robcat2075, -
- 9 replies
- 1.3k views
Hi, I've already Emailed Support and Stephan directly, but yesterday when I went to renew my sub there was an error at purchase confirmation that read as though the order hadn't been accepted. I tried another couple of times and got the same error. Giving up I went back to my account summary and saw I'd been charged for 3 subscriptions! I later got order confirmations for all 3 subs but I only need 1 and it's my wife's credit card I need this sorting as quickly as possible so she doesn't get annoyed at me. Plus it told me the orders hadn't been accepted so it's not like I deliberately bought 3 subs. Anyway the 3 order numbers are 8277, 8278 and 8279. I have act…
Last reply by themike38, -
- 2 replies
- 729 views
Hi all im back again, this time to stay.lolllll i was longhauling all over north america (truck driver) and now have a home and a place to relax.i have aquired an illness which forces me to be home and so i bought the full cd version of am. ok my question is, is that it just arrived today but am reluctant to install it. the reason is because at home i have a state of the art computer that i bought specificly for animation master and adobe after effects and such. now i have to go back into the hospital for several months and i want to install am on my laptop while im in the hospital, but when i come out i want it on my main computer, can this be done or no. any help in …
Last reply by mtpeak2, -
- 4 replies
- 652 views
Hi, I also noticed that the pallet locations I took the time to arrange across my dual monitors went away!?! Anyone else seeing anything like this? Can't think of anything I did that might revert them? Weird! Thoughts? Rusty
Last reply by rusty, -
- 1 follower
- 1 reply
- 457 views
I noticed in 17c the same project rendered AO considerable slower. In 17a rendered 8:53 i think and 17c 37 minutes. Has anyone played with AO in 17c? Steve reset it again and it has not finished yet and it is now 1:30 hours per frame.
Last reply by robcat2075, -
- 0 replies
- 889 views
Note: The link below is a direct link to the download. It will initiate the download. The Soureforge site: http://sourceforge.net/projects/wings/ In case anyone wanted to try out the version wings 3d that exports polygon based models to hash mdl. files here is the link
Last reply by jirard, -
- 2 replies
- 639 views
Hi, Can anyone tell me if there have been any changes since V14 related to: * Hash's project and model files--specifically are they still text format * Hash's library and especially the library files Thanks, Rusty
Last reply by rusty, -
- 3 replies
- 845 views
Hi, Plugins: Wanting to update my existing plug-ins (I had everyone I think) and check for new ones: is there a master list maintained somewhere? Tutorials: Is there a master list of these? Thanks, Rusty
Last reply by rusty, -
- 4 replies
- 723 views
Hi old frineds, This is Rusty and since the return of NetRender I'm upgrading from V14c. Can anyone pointout any new features added since 14c or links to same or links to tuts on these. I kind of remember some kind of water function being added to 15 but that's about it. Thanks for any help! Rusty PS: I'm sure most of you have seen my new book (paperback due out by end of year) and the book trailer I created in AM V14c: http://www.amazon.com/The-Spiral-Slayers-E.../dp/B008STATCO/
Last reply by rusty, -
- 9 replies
- 1.5k views
Hi everyone, I was wondering if there were any other import plugins other than the ones that come stock with Animation Master. Thank you for your replies
Last reply by Kombowz, -
- 3 replies
- 659 views
I see we are being tempted with v17b now but the link for it's not working
Last reply by Jason Simonds, -
- 5 replies
- 807 views
So v17b, is there a problem with the EXR.iio plugin? I get a warning on launching A:M that it won't load. If, as I have, I swap the plugin for the one from v17a it launches perfectly.
Last reply by rekh, -
- 5 replies
- 703 views
Reference: [bug]6102[/bug] I'm wanting to explore a few of the reports filed away in A:M Reports in order to better understand what the user was/is looking for and so that in v18 they will be more likely to see what they are looking for. Obviously my exploration will stop short of any coding or programming... but in the exploration who knows what might be found! Report 6102 looks like one worth exploring because it is likely the reporter hasn't yet fully explored the Snap to Feature tools in light of other tools currently available in A:M. General Data: 6102 DJBREIT moderate beta0 Modeling 3/26/2012 Windows 7 64-bit Sevice Pack 1 i7 960 3.20…
Last reply by Rodney, -
- 0 replies
- 431 views
If you haven't logged in to the A:M Community in awhile you should drop in and check it out. This is a place where new users visit often so meet with them and welcome them to the A:M Community. Online See who else is online. Initiate a private chat with anyone listed by double clicking on their name. Note: You can have both a public and a private chat ongoing simultaneously if you want to do that. This is especially useful during scheduled chats, interviews and discussions where you and others don't want to interrupt the public chat. Chat Drop in and chat! Post your questions. Share resources and experience. Let everyone know what you are wor…
Last reply by Rodney, -
- 2 replies
- 643 views
Okay, whose got the scoop on this one. These additions sound very useful. Very useful indeed! Downloading now to begin the experimentation. Thanks Steffen and Hash Inc! If you haven't already got it: Download v17.0b!
Last reply by Xtaz,