Animation:Master
News and Information
Subforums
-
- 143
- posts
-
- African grey?
- By Fuchur,
945 topics in this forum
-
- 5 replies
- 2.6k views
Hello- SumiV15Test.prjHere is a suggestion for the question of the day. Trying to use the Sumi PlugIn for V15 and am not sure whether I am doing the procedure incorrectly or whether the plugin Simply doesn't work anymore with this version.
Last reply by robcat2075, -
- 5 replies
- 1.1k views
I am not sure if people are aware of this, but I just did a small test and it works... You can even use one decal (UV set) to layer color maps with transparency over each other. Not sure if it helps a lot (maybe with 3d painting it could be nice for instance to animate wounds or skin changes or something like that?) but it was an interesting thing for me... Best regards *Fuchur* video_stacking_color_maps_on_each_other.mp4 decal_texture_layering.zip
Last reply by Fuchur, -
- 5 replies
- 977 views
Rob- I came across a puzzle that you might help with. I am trying to "grow" a molecule, segment by segment, almost like a time lapse thing, but I can't figure out how to control the slow growth of each segment using pose sliders. Maybe there is a smarter way...see you at noon. Tom Molecule.mdl
Last reply by KingVidiot, -
RLM error -3
by Guest Frederick- 5 replies
- 1.2k views
Hi. When I try to open A:M it comes up with a contact support message. No way to enter my new subscription license number. What can I do to get it running again?
Last reply by Jason Simonds, -
- 1 follower
- 5 replies
- 1.3k views
Hello, I had an idea about an animation I'd like to do which I'm trying (probably unsuccessfully, knowing me) to keep fairly simple. It involves basically one thing that I want to make sure is feasible before moving forward. If not, then I need a Plan B. I have a round hole in a flat surface. For part of the animation, I want the round hole to morph into a square hole, and then back to a round hole. Is that something that can be animated? Thanks
Last reply by WolfsongCG, -
- 5 replies
- 1.3k views
Having issues in later Versions to render previews. It asks for a null, than just creates an empty AVI in the Temp folder. Rendering a larger region with multipass in the choreography fails. Also the MDD export does not work. The MDD, OBJ and LWO files all have different point counts. Hooks create 2 points instead of merging to one, and with 4-point subdivision export 5 point patches will add 5 extra unmerged points. I tried it on different computers with Windows 7, but always the same issues. If someone had the same problem and a solution, I would love to hear about it. Thanks, Rolf
Last reply by Bobby, -
Hi everyone! Just re-purchased and can't find my serial keys, have clicked the right links, written 3 or 4 times, haven't heard a word in reply and for the first time in 20 years I can't get anyone on the phone (I'm told it's not in service). And I've got a job I need to do pronto. Is there a new tick or has my memory gone to hell? Didn't do anything weird and my computer's bug free. Where are you Randy and Steve? Anyone? Thanks much all! Doug
Last reply by Jason Simonds, -
-
- 1 follower
- 5 replies
- 887 views
While rummaging through an old miscellaneous folder I found a plug-in from 2005 that, if I remember correctly, simultaneously changes the crossing bias at all cp's around a circular spline. It could be a nice time saver. I tried dropping it into my HXT folder but it didn't show up as a plug-in or wizard. Is there some way to "re-compile" it for v19p? Bottleneck.hxt
Last reply by robcat2075, -
- 5 replies
- 1k views
Here is a mesh with many splines but I can curve any portion of it, large or small with just three controllers. CurveController2.mov
Last reply by Mechadelphia, -
- 5 replies
- 864 views
Hello everybody, I wish you a Merry Christmas, Hanuka or whatever you may celebrate at this time of the year :). Best wishes, keep on splining and all the best to your families too *Fuchur*
Last reply by Roger, -
- 1 follower
- 5 replies
- 910 views
I have three models overlapping and I want to select only the CPs of one of them so I can scale it. So basically, how do I select all the CPs in a particular object? I know noob question, and I've searched the forum but it only gives me threads with hitting Cntrol+A to select all the CPs in the scene. Thanks
Last reply by robcat2075, -
- 5 replies
- 997 views
Long time A:M user William Hennes @willaim is so busy with A:M that he never gets around to showing the cool stuff he does with it... so I'm posting it! Oct 15, 2022 Dwarf Head modeled in A:M, 3D printed in resin. For his "dragons of winter" project.
Last reply by Roger, -
- 5 replies
- 890 views
Hey guys, I wish you all the best and a great celebration time Best regards *Fuchur*
Last reply by Xtaz, -
- 5 replies
- 440 views
A couple of toon line experiments. This one composites renders with four different line widths and biases The next one takes a render with a thick line/very low bias like this... and then a "levels adjustment" to force out the gray.
Last reply by robcat2075, -
- 5 replies
- 138 views
HEY HEY HEY!!!! everyone, I’m working on my Krystal character in A:M and I really need some help bringing her to life with actual animated staff actions. I’m looking for someone who can help create a few cool moves, such as: Staff swings and strikes A spinning sweep or twirl A kick-swing combo Blocking/defensive staff actions I’d be super grateful if anyone here could make a few action files or short examples that I can plug into my project. Even just a couple of polished moves would help me a lot and give me a base to build from. Pizza Time!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Krystal .zip 4b…
Last reply by robcat2075, -
- 5 replies
- 8.8k views
Look at this fabulously flexible result of rigging a face with the Transfer_AW plugin. Steve @Shelton modeled this great character (right) and then we pulled out a lo-res version (left) with just enough splines to cover the essential landmarks of the face. We rigged and CP-weighted that with some minimal bones for the jaw and lip corners and then used Transfer_AW to interpolate that lo-res rig to the hi-res mesh. It would need some further fine-tuning but this is a huge time saver for rigging a face. TAW Hans.mp4
Last reply by robcat2075, -
- 4 replies
- 1k views
Wanted Cartoon "Nightwalk"! (a man came out at night to pee) Let's find the cartoon "Nightwalk". And place it in our gallery. I could not find on-demand "Nightwalk" in the http://amfilms.hash.com/ Perhaps it is left on the disk 98 AM??? Another thing I remember was a wonderful animated toilet - would also like to find it.
Last reply by robcat2075, -
- 4 replies
- 742 views
Hi, I also noticed that the pallet locations I took the time to arrange across my dual monitors went away!?! Anyone else seeing anything like this? Can't think of anything I did that might revert them? Weird! Thoughts? Rusty
Last reply by rusty, -
- 4 replies
- 1.1k views
Trying to remember how we used to take a specific frame of animation on a character and export it as a model... completely posed as it was on that frame. Anyone remember?
Last reply by robcat2075, -
- 4 replies
- 1.4k views
Hi Elm, As far as I understand it (please correct my if I am wrong Jason) there are two version available: - A:M Subscription for 1 year ($79.99) - Never expiring version ($299.00) Both are download-products today. (only manual + ExtraDVD can be selected to be shipped with the never expiring version). Both are software-dongled to one computer per license. > Infos on hash.com: A:M Versions See you *Fuchur* It isn't a dongle. Don't misled. The hash.com software details page should also be corrected. "A software protection dongle is a small piece of hardware that plugs into an electrical connector on a computer and serves as an …
Last reply by Fuchur, -
- 4 replies
- 833 views
Hi old frineds, This is Rusty and since the return of NetRender I'm upgrading from V14c. Can anyone pointout any new features added since 14c or links to same or links to tuts on these. I kind of remember some kind of water function being added to 15 but that's about it. Thanks for any help! Rusty PS: I'm sure most of you have seen my new book (paperback due out by end of year) and the book trailer I created in AM V14c: http://www.amazon.com/The-Spiral-Slayers-E.../dp/B008STATCO/
Last reply by rusty, -
- 4 replies
- 857 views
is the support@hash.com still the correct place to correct activation issues. Normally they response quickly. I replaced my main hard drive with a SSD. Now i get an error (-4) or the key has already been used (when I try to reenter my key)
Last reply by Phil, -
- 4 replies
- 1.1k views
hi, i couldnt find the SDK category anymore, so i post it here. can somebody from hash give me a file description of the baked particle files (*.par, *.pai)? i assume that *.par is storing the particle positions per frame and *.pai the particle index number, right? but this files are binary and i want to know how they are written. and is there the possibility to acess particle data via the sdk? my goal is to import other particle simulations from other applications (like realflow, xsi ICE, etc.) another thing is, that the user can not define where those baked particle files are stored. they alway be stored in the application install location in the libra…
Last reply by Rodney, -
- 4 replies
- 888 views
When I bake a surface is there a place to choose its resolution ??
Last reply by Xtaz, -
- 4 replies
- 712 views
Hello- I was playing around with hair and decided that because of the complexity of the final model, I would create the hair separately as another "object" and then copy, paste it onto the final model when the hair was groomed perfect. That seemed to work OK when the Hair was a "material" that was applied to model "patches" however, when I tried the same thing using hair on a SINGLE spline with a "Shag emitter" material applied it only copied the spline and NOT the hair "Shag emitter" with it. Has anyone else been able to copy, paste a SINGLE spline with a shag emitter applied, from one model window to another successfully? The benefits would seem to b…
Last reply by Tom, -
- 4 replies
- 1.1k views
V13 worked pretty good since last week. Suddenly I could not open the libraries, only posteffect works. All pathes under -Options- Folders- are ok. So I tried to reinstall the version new, but deinstallation is not possible, I always get the the message could not open INSTALL.LOG file. The same occurs when I try to deinstall V12 on my computer. Any idea what`s to do?
Last reply by Robert, -
- 4 replies
- 757 views
Hi, This is very strange! On my notebook (btw, I don't have this problem on my desktop) if for example I hit 't' for turn, the icon comes 'on', the mouse cursor changes correctly but turn doesn't work. If I select the turn icon, it works. Same with other tools. Has anyone else encountered this? Any ideas on how I might fix this or what I might try or how I might trouble shoot this? Thanks! Rusty
Last reply by rusty, -
- 4 replies
- 1.1k views
Hi! Question 1: It use to be that to do a really clean uninstall of AM you had to search through the registry for "hash" and remove a couple of entries. It seems like Hash has to its credit added the removal of registry entries to its uninstall process. Besides "hash" is there anything else I should search for? Question 2: During the install there are now several options. One is whether or not to install SSE4. What is SSE4 and, if you know, the pros and cons of installing it? Question 3: Related to the above...what would be the pros and cons for installing the Timelog plug-in? Thanks for any information you can give me! Rusty
Last reply by rusty, -
- 4 replies
- 1k views
I'm doing some work with a student designing a perfume bottle. She wants the bottle to have a colour and transparency gradient so that its darker and less transparent at the top. I'm following Roberts suggestion regarding materials for my own animation were I need a heat transfer, but wondered if there might be a different way of doing it with the bottle ? Transparency and diffuse maps perhaps ? Any help gratefully received. regards simon
Last reply by Simon Edmondson, -
- 4 replies
- 1.1k views
Of slight interest perhaps. I'm rendering exactly the same scene, with the same settings, at the same time, using V15 and V17 on my Imac. The V17 frames are going through at 2mins02 average and the V15 frames at 5mins 29. Quite a difference ! simon
Last reply by markw, -
- 4 replies
- 971 views
Is there a standard way to get a sphere ? I ask because I was trying to have a go at the current animation challenge and was using the ball made for last weeks brief. Only to find that its not as spherical as I had thought. The original was a lathed spline which had been adjusted to get the correct curvature, or so I thought Is there a standard method for such a primitive shape? regards simon
Last reply by Simon Edmondson, -
- 4 replies
- 948 views
Hi, I posted this before and we all decided it had to be related to other Windows 8 weirdness but I completely reloaded the OS and all other problems are gone but my notebook is still shit canning me on A:M shortcut keys. My system info is below. Description: The Navigation tools work when the tool icon is selected but not when the shortcut key is used even though the mouse pointer changes the way it should. As far as I can tell it is only the navigation tools. Everything else works. Example: * AM is installed with no customization * I click on the zoom tool and my pointer changes to a magnifying glass and all works perfect * I press the z key and my …
Last reply by rusty, -
- 4 replies
- 753 views
This is in anticipation of next brief, so not urgent but,I was thinking of using the theme of a swing in a child's playground and wondered if anyone had any thoughts on the best way to rig the swing? I was thinking about a kinematic or dynamic constraint for the rope but is there a more efficient way ? Any help gratefully received. regards simon
Last reply by Simon Edmondson, -
- 4 replies
- 790 views
I notice that when working on SmartSkins, in the PWS you can on a CP or Spline number and get the option to "Select Spline #" or "Select CP #". However nothing appears happen when choosing either. What should happen? However it would be immensely useful it those options did in fact highlight their counterparts in the actual SmartSkin window. This would make altering/tweaking just a few Cps in a SmartSkin much easier to do later on if one was not happy the first time round. Is this in fact what is supposed to happen? If so then I think it's broke
Last reply by markw, -
- 4 replies
- 1.6k views
Why when you click on the button "Force KeyFrame" in AM v.17 animated object takes the initial values??? I can not turn off constraints of animated object (in AM v.17) without moving the object to the initial state. In attach example v16: At frame 40 - constraint is ON (Translate To & Orient Like) At frame 80 - constraint is OFF (Translate To & Orient Like) How it works in v17? Please describe the algorithm on/off constraints to animated objects. Project5_v16.prj
Last reply by serg2, -
- 1 follower
- 4 replies
- 1.3k views
For the life of me I can't remember how to move a bone in real time, letting each frame be a keyframe. I feel like my memory is going to wrack and ruin. Could someone give me a nudge. I'd very much appreciate it. Thanks. Doug
Last reply by nimblepix, -
- 4 replies
- 1k views
Hi all Is there a setting somewhere in AM to keep all the drop down menus within the properties window open/down all the time. e.g. when selecting a bone and I want to get to the rotate z value I need to drop/click the 'transform' button then drop 'rotate' button to get to the' z' value. Then if I choose a different bone I need to follow the process again..... etc....etc Is there a way to keep all those values open all the time. Hope my question is clear. Thanks
Last reply by DavidDenzill, -
- 4 replies
- 1.1k views
Using an environment map in v 17 and it looks like a color decal instead of reflections. I can't tell if I'm missing a step but I recall it was pretty straightforward. Is there an additional *something* I need to do to get the reflective quality?
Last reply by Gerry, -
- 4 replies
- 826 views
I asked about this before and Rodney found it but now I can't find it again... there was a version of the Techref, online, that had all the features of the CHM help in previous version of A:M.... search, index, chapter outline Where is that?
Last reply by robcat2075, -
- 4 replies
- 793 views
Hey Everyone, Which versions of A:M can render a shaded wireframe? V17 always gives an error message.
Last reply by itsjustme, -
- 4 replies
- 1.3k views
Hello All- Just thought I would upgrade to the 64bit version of AM and try using version 17.0g. Overall the speeds are great however I discovered when I try to render avi movies I get an error message, "AVI file create stream error". Also discovered that there are no options to render QuickTime movies in this version. Does anyone know if there is a fix for the avi rendering or if QuickTime rendering is planned for the future? Many thanks! Tom
Last reply by robcat2075, -
- 4 replies
- 1k views
Is anyone else missing this? It used to live in the 'Draw' section of Tools > Customise > Commands, if you wanted to drag it into the toolbar but it's not in mine.
Last reply by robcat2075, -
- 4 replies
- 2.4k views
Has anyone worked out how to access the numeric keypad keys on a Surface Pro 2? I can get the on screen keyboard to display but the 'number pad' is simply the number keys and not the numeric keypad keys..... Cheers David
Last reply by pixelplucker, -
- 4 replies
- 1.3k views
Just a question. Its another segment of the pc landscape that might be something to try. I know development resouces for AM are very very limited but just wondered. I run a linux box at home besides my windows ones and just thought it might be a way for more sales. I have no idea of the effort required but figure if Valve with its STEAM portal is pushing into Linux it might be a thought. Speaking of Steam ---- I still think AM on Steam would be a really good thing if you could figure out a yearly sub mechanism out with them. rich
Last reply by Vertexspline, -
- 4 replies
- 844 views
Hi There, I created a relationship with some constraints. Opening up that container just a moment later leaves me with plenty of questionmarks on the containers and i dont know what these questionmarks are all about? What is wrong here? Then a suggestion: I find the AM Project Workspace very useful and totaly cool, however, what I would like to suggest is two things: First I would love to see the rows beeing colored in alternate colors. Something like bright grey line 1, a little darker grey line 2, bright grey again line 1 etc. The second thing, I would love if the different sections in the workspace could be seperated better. At the moment it i…
Last reply by robcat2075, -
- 1 follower
- 4 replies
- 878 views
I wonder if there is a command in A:M that lets you insert a spline ring in a model? I mean a complete spline ring above or below a given existing ring. NOT point by point, NOT an extrusion...but kind of something inbetween: select a spline ring, then select this command I am looking for, and presto: a new spline ring is inserted. I have search both forum and tech ref in vaine...but maybee it exists as an undocumented shortcut?
Last reply by robcat2075, -
- 4 replies
- 1.1k views
I don't know about other folks but I've been using the heck out of the new Snap to Control Point feature. I was using it before to match up splines and CPs but today I used it in a Pose to assist with precision placement at 0%, 50% and 100%. My project here was to create a modular monster whose belly can match to 'small', 'medium' and 'large' sizes as well as (manually through the pose slider) other settings. If you'll pardon the cheap graphics from this POC... I'd say it worked rather well. I meant to render a wireframe to show the three target zones for the modular monster's waists. Edit: Mov replaced with shaded wireframe render. (the three ovals being…
Last reply by mulls, -
- 1 follower
- 4 replies
- 1.1k views
I've added a rotoscope image onto a view and adjusted it how I thought I wanted it (along with 4 other views). After adjusting for sizing and aligning with the axes like I wanted, I went through and selected the "No Pick" for each in their Properties. However, I found later that one image is aligned on the wrong axis. How can I get access to the rotoscope image on that view that is misaligned since I've turned off picking it, I can't click on it. I'm running AM 2006. Thanks for the help. Tom
Last reply by Rodney, -
- 4 replies
- 1.3k views
Hi, What I'm after is a still shot of matter spiraling into a black hole. 3D streaks of...lets say dust or clouds. Lets just consider a cube (instead of the entire spiral)...if only there was a material that would fill it with 3D clouds but, to my knowledge, materials don't work that way, they apply themselves to flat patches and can have bump or perhaps even displacement for depth. Like the above, what I'll probably do is just whack out the sides and ends of the cube so I have two patches and, instead of a material (and longer render times), I'll just apply a cookie cutter image of my cloud streaks and then apply a deformation map to give them a 3D look (from t…
Last reply by pixelplucker, -
- 4 replies
- 1k views
Have set up a run cycle action for a sheep and need to animate it to a mark using the action, but then keyframe it after that point. I recall a tutorial somewhere about doing that but can't remember where. Could somebody kindly refresh my memory ? The setup at the moment is that, the sheep runs up to 00:04:09, The action stops. I would then like to key it jumping over a hurdle from 00:04:10, using the last frame of the action as the starting point for the keyframing. I am sure this is possible but, if keys are set after the end of the action, it seems to affect the section before. This may be caused by too many late nights and early morning, bu…
Last reply by Simon Edmondson,
