Work In Progress / Sweatbox
Subforums
-
Showcase (57,349 visits to this link)
-
- 530
- posts
-
A:M Stills (86,670 visits to this link)
-
Works In Progress (WIP) (59,272 visits to this link)
-
- 3.1k
- posts
5,155 topics in this forum
-
- 14 replies
- 2.3k views
Hi Hashers .... I was playing whit AM, IBL, HDRI, AO and other letters and i resolved to render a wallpaper to use whit my new laptop .... the result is here, i didnt compact it to show all its colors ( 830Kb ) all comments are welcome ... as always
Last reply by MattWBradbury, -
- 0 replies
- 404 views
This is a result of an hours work. It's still a WIP, need to add some details. (I make the basic shape then add the details.) USS Enterprise-F Enjoy.
Last reply by Tacku, -
Master Chief
by dude- 9 replies
- 1k views
I've been wanting to model master chief for a while now, even though I dont have either of the games, and have finaly found the time to start. I used a free master chief model from turbo squid, ripped directly from the game, and imported it for refrence. Since 3ds's dont import verry well, it wasn't much help. So far I've finished the helmet only. Wireframes: With better lighting: Next i'm going to work on the body! -Dude
Last reply by Nunsofamerica, -
- 1 follower
- 38 replies
- 3.2k views
A diversion from shoveling snow Not explicit but mature subject matter, ask your mom if you can watch this? Hanging with Saddam
Last reply by jo b., -
- 6 replies
- 781 views
hbee.mov Made a simple bee model and rendered it with alpha channel and a bit too much motion blur, as a series of tgas, as the bee followed a simple path Used images for hair material on small model and got what you see above Wing movement with simple expression on each wing bone I'll post the project after I try a few more things
Last reply by Mike Lium, -
- 1 follower
- 5 replies
- 531 views
Crumblenet had taken a break for a little while due to some other responsibilities. So, I will be posting some progress.
Last reply by Nunsofamerica, -
- 1 follower
- 5 replies
- 773 views
I was just testing water reflection and movement with canoe. This is going to be part of Act 1, scene 2. It's only 1.3 meg. http://www.dwaynejensen.com/Misc/Untitled.mov
Last reply by Dwayne, -
- 1 follower
- 5 replies
- 863 views
Four legged critters are very hard to rig, even harder to animate. I've always been a fan of The Last Unicorn so I decided to model and rig The Red Bull. Here are my results thus far.....
Last reply by Ilidrake, -
- 6 replies
- 868 views
I saw this old cartoon picture with the monster character driving his hotrod it was from the mid 60's. Anyway just goofing around and got this cartoon car idea although not a very detailed or accurate version and then cartoon rendered what I had so far. Might add the character next ... just a fun side project Johnl3d ...burp no more food pleae.
Last reply by the_black_mage, -
- 1 follower
- 2 replies
- 428 views
Since I have been off (from work... ) this week I been pushing some ideas I've been thinking about on my commute to & from work so here is another one. I used an expression to move a series of bones on a plane to make waves. The actual expression was applied to each bone with a simple copy and paste and a tweak. It needs adjustment since it is a bit fast but I wanted to try a render. So I grabbed a boat off the cd, a darktree material, for the water, added a null following a spline on the grid, to contrain the boat's position and rendered. Its only a single multipass to speed things up ( slow computer) and a litttle jaggy but here it is wavetest.mov …
Last reply by johnl3d, -
- 2 replies
- 446 views
hey yall. i'm so happy to finally be up in here. this is a WIP of a rapper I been working onjay_z_pimpringtone.wmv
Last reply by victory3152003, -
- 1 follower
- 12 replies
- 1.5k views
My final textured version of the steam hammer. The texturing uses standard A:M combiners, two Darktrees and more than a few Enhance A:M combiners.
Last reply by zandoriastudios, -
- 4 replies
- 882 views
Hi hashers ..... I used the Peugeot that I modeled in november to do some tests whit HDRI .... the result is here.... Comments are welcome... as always .....
Last reply by Xtaz, -
Landscapes
by Dwayne- 1 follower
- 6 replies
- 706 views
Stylized Landscape, do you like it, or is it too different. I like it, but what do you guys think. I have also stylized the trees, there is a sample of one of them in the Mtn pic. I modeled a canoe in the lake one, I'm working on the charaters now. These we just tests, of the look of the landscapes. So camera angles etc. would be different with the charaters, and the lighting would foucus on the charaters more than backgrounds etc. Dwayne http://www.dwaynejensen.com
Last reply by Dwayne, -
- 1 reply
- 485 views
Here is a very short idea for a splash newtonsplash.mov newtonsplash.zip It is a little to much for my machine just a thought I had to try did it again with sprites spritenewtonsplash.mov spritenewtonsplash.zip
Last reply by ArgleBargle, -
Saw a lot of these guys lately as this one sees his reflection
Last reply by johnl3d, -
- 1 reply
- 356 views
Kolbaskin
Last reply by Luuk Steitner, -
- 0 replies
- 355 views
I was going to play with V14 A2 but it would not cooperate so after using the terrain editor plugin included in 14 I went back to v13 and played using a spline as a path (shift pick) to do this..toonnation material, clouds from cd etc terrain.mov here's the project minus the images which could be skipped trial.zip
Last reply by johnl3d, -
- 2 replies
- 407 views
This is my xmas card completly made in AM. Merry christmas and happy newyear to all of you. For those who should wonder why Rudolp has not a red nose , he is still in AA.
Last reply by Luuk Steitner, -
- 1 follower
- 6 replies
- 575 views
This is still a bit rough around the edges but I think the flow is just about right. So I thought I would post the opening sequence to my first ever Bella Bear short (the one that I am still working on and which I have already animated a section from the middle). Hope you lot like it, here's the link: Space Flight
Last reply by gazzamataz, -
- 28 replies
- 2.8k views
Some of you might remember the thread about the German WWII battleship Bismarck I started some months ago. After I finished Bismarck I accidentally came in touch with the author of the drawings I had used as referances and rotoscopes. He was at that time working on a book of Tirpitz for the Norwegian museum of defense. All ended up with me converting the Bismarck into Tirpitz to be used as illustrations for the book:) btw if someone is interested, here is a LINK to information about the book (with som samples) Here is a few personal renders for you to inspect: The first render features both Tirpitz and Bismarck, the others are Tirpitz only Let me know wha…
Last reply by dre4mer, -
Hey peeps, been working on this animation the last couple days. Just something for my demo reel. I haven't animated the second character yet, but he's going to be looking at a paper or something. Can you guess what's going to happen next? Yeah, he's gonna wipe it on the poor guy, but in a very discreet manner. Anyway, comments welcome! Enjoy! sneeze_low.mov
Last reply by ruscular, -
- 6 replies
- 836 views
Hi all! I have just finnished a fast model of my favourite fruit: The Peach. It lookes okey but comments are always welcome! [attachmentid=23247]
Last reply by Korken, -
- 13 replies
- 1.1k views
i wanted to try a new kind of things to make so i thought it would be cool to try us military gear first i tried with the helmet still a lot needs to be done with it i need to finish the chin strap with the clip. the strap holder need to be fixed and a bunch of other things. tell me what you guys think so far
Last reply by thejobe, -
- 1 reply
- 432 views
I'm getting closer and closer to getting this thing done! Once Lillith here is finished then I've got one more robot to do. Then I finish my script, make the two space ships and any other sets I need. After that I start animating the show. Check my latest progress report on robotoon.tv
Last reply by martin, -
- 12 replies
- 1.4k views
it is the room of a kid of a personal animation in work... any suggestion or opinion, WELCOME thanks[attachmentid=14728][attachmentid=14728]
Last reply by ArgleBargle, -
- 30 replies
- 1.9k views
I should be working on TWO stuff right now but... Okay, so I happened to come upon a picture of this action figure of Wolverine and decided that it really needed to be modeled Here's the torso so far... [attachmentid=22727] again I really want to get that cool look that Blur studio gets. Is that kind of look achievable for A:M? What do you think? Lee
Last reply by the_black_mage, -
- 38 replies
- 2.8k views
Introduction: I’m remaking an old Christmas video called “Twas the Night Before Christmas” that I did three years ago. As I completed scenes, I thought I would blog them here for general discussion of animated short making and have everyone critique what I am doing. I originally did this piece as a video Christmas card however in my ignorance of delivering video, most of the people I sent it to didn’t have the bandwidth or a powerful enough computer to view it. This year I will make it into a DVD and hope for a wider audience. I started about the first of July and am shooting for completion by December 19th. While I would love a lot more time, I am going to mak…
Last reply by Bruce Del Porte, -
- 2 replies
- 531 views
Hello peoples! I have just finished Keystones (Keystone Online Highschool Home Page) AM course. I am just waiting for my last grade. So I thought I would show you what sort of stuff this course has you go through. No videos though. Most are AVI and too big for the forum and my comp won't render MOVs. Most images are frame captures from the animation. The course has all animations on VGA format. Onward! Assignment 1: Introduction and spheres The course assumes that the student has never touched AM. I had some experience so these first couple of projects were a breeze. This one introduces the splines, texturing, scaling, and the chor window. The m…
Last reply by Chrury Sanson, -
- 1 follower
- 8 replies
- 1.2k views
This topic will serve as my main topic. I upload my animations to http://rl01.revver.com/account/show/UberAnimator. I will post a new reply with a link to the video in question when I have a new one up. Right now feel free to comment on all my videos I have there. This should make it a lot easier to keep track of my animations. The reason I am using revver over YouTube is because it is fast, and does both flash and our all time favorite, QUICKTIME . Looking forward to comments. New Additions: WIP#1 - Quinton Kleer On Santa | Time: 0:00 - 0:07 Quinton Kleer #1 My Animations - FIXED
Last reply by Heath_Naylor, -
- 1 follower
- 20 replies
- 1.7k views
Ok I'm working on an A:M version of the required setup of cgsphere.com but i can't get it right heres what i mean. [attachmentid=22932] this is what i have now. [attachmentid=22933] this is what i need, witch is also mixed in with the render to show the difference. the guy who made cg sphere wants it a minimum of 95% close, can any one help me. [attachmentid=22934] cg_sphere.zip
Last reply by the_black_mage, -
- 7 replies
- 524 views
I just though it would be good to keep my skills in hone every now and then so i did this model tooke me quite a while to finish but i think it finally done. i orginally saw this in an old 1985 tech magazine it was suppose to be the future of cell phones or something i was going off of basicly memory since i lost the magazine. its amazine how the idea of technology changes, just thought that was intersting.
Last reply by thejobe, -
- 14 replies
- 1.2k views
Hi, my name is Jared Claybrooks, and this is my first animation project of decent quality. The subject matter is one of the boss fights from the game Earthbound. Ness, The Protagonist. Titanic Ant, The Antagonist. An image of the action. The whole animation won't be too substantial, maybe a minute and a half. I'd say that right now the project is about 60% complete, and could use some critiqueing before it's finished. thanks!
Last reply by EKG Studios, -
- 12 replies
- 1.1k views
A friend of mine has to give a presentation on an amusement park ride that he designed. I offered to make a short video showing the ride in action. Here it is! ~7mB Its been fun spending some time messing around with AM again. --Ross
Last reply by case, -
- 7 replies
- 458 views
Since it's so hard to get my big projects off the ground, I thought I'd share with everyone my little stuff that I do just to keep in shape. So here's the first, a simple mouse. [attachmentid=22871]
Last reply by Joe Gamblin, -
- 3 replies
- 328 views
[attachmentid=22962] trying out decal idea either as color decal or displacement...set up on slider for now Any comments welcome never work on a computer when you are half asleep... bpenguin.mov
Last reply by NancyGormezano, -
- 4 replies
- 413 views
i was bord today so i thought i would test out some booleens and see how they come out heres the final render [attachmentid=22773] and heres a real time render [attachmentid=22774]
Last reply by the_black_mage, -
- 12 replies
- 736 views
This is not the contest thread but don't miss it. Go over to The Contest Thread and Vote! ------------------------------------------------------------------------------ This is just my almost ran image thread. Well, the pressure is off. I missed the deadline for the contest but as I had a couple of festive images on the boil I am going to post them here anyway. This image was a mock up of what I was going for with my first image. It is all A:M, (11.1 and 12), but is a composite on three layers. When I finish working on the second image I will get back to this one, finishing the sleigh, better poses for the figures, get the hair flowing and add a prope…
Last reply by Paul Forwood, -
- 1 follower
- 9 replies
- 733 views
I am wondering how to make a camera's orientation follow the twisty curvy paths orientation like the one shown in the video, or more importantly, how to make a coaster car follow the orientation of the path. Making the camera or object follow the track is easy enough by making one of the pipes splines the path. Also, I was able to create two path constraints from the camera to the two outside rails which keeps it from moving into the mesh when the track twists and turns. I thought that would actually cause some weird circular constraint problem but it didn't. But I would like for the camera or for the coaster car to be oriented the same way as the track. In other wor…
Last reply by Rodney, -
- 10 replies
- 841 views
Saw a display that got me doodling in AM..need feet and wings [attachmentid=22720]
Last reply by steve392, -
- 11 replies
- 1.1k views
I have been gone from A:M for a very long time! (1.5 years) I suddenly realized that today and decided to dust it off and play with a simple flour sack...I thought it would be a good exercise to make a walk cycle and possibly a few other actions. I am quite rusty and would like some tips for improvement. Thanks! sackwallk.mov
Last reply by Dhar, -
- 26 replies
- 2.7k views
Hi guys. Its been a while since I've showed anything in the showcase forum. These last weeks I've been working on two cars for David Dustin. They are both 1st generation Neon's. The red one is a sedan while the purple one is a coupe. The headlights are just simple textures since they are going to be used in a dark scene. Let me know what you think Best regards Stian [attachmentid=22485][attachmentid=22486] [attachmentid=22487][attachmentid=22488]
Last reply by animas3D, -
- 7 replies
- 879 views
Well, it's not perfect, but it's nice to be done with something. Started this as an exercise and feel like it turned out alright. Would love to hear any crits before I start on another animation. Thanks! Here's Boxman VS Fridge -Nathan
Last reply by trajcedrv, -
- 7 replies
- 602 views
Rendered out a clip of Quasimodo telling Esmerelda that the bells made him deaf. Its compressed with Sorenson 3 Quicktime and is just over 7 Mb. Here is the link: http://s1.upload.sc/request/d97ba0edc301ff...04b1550d9/owner Cheers AndyG
Last reply by Dhar, -
- 2 replies
- 380 views
Hey guys, check this out. I made this teaser trailer for my Star Wars fan film, Star Wars Frontlines. What ya think?
Last reply by Dhar, -
- 15 replies
- 1.9k views
I'm pleased to announce that my short film "The Cell-Phone," winner of the first Mini-Movie contest, will receive its film festival premiere at the D.C. Shorts Festival on Thursday, September 14, 2006. This is a newly re-rendered and revised version, produced with a lot of help from A:Mers Jeff Lee, Mike Stamm, Glenn Antofer, and Rhett Jackson. In addition, my films "<ESC>" and "Soap Opera" will be showing at the first annual Idaho Panhandle International Film Festival in Sandpoint, Idaho. The festival runs from August 24-26.
Last reply by Bruce Del Porte, -
- 2 replies
- 508 views
As most of my MOV files are to large for this forum, and MOV is prfered over AVI, I'll show my work using AM at this url http://vids.myspace.com/index.cfm?fuseacti...eoid=1486046701 I first started by disecting one of the sample models to see how it work. Ideas came from seeing the work of many AM ers. They did provide the building blocks need to learn the mechcanics of this neet software. I am open for any and all credics
Last reply by Bruce Del Porte, -
- 1 follower
- 41 replies
- 3.5k views
I started working on a fan film a while back using Anim8or, a free animation and modelling software program. Due to some limitations in the animation portion of the program, I purchased Animation Master to continue the project. Unfortunately, the models did not import very well into A:M, so I am starting the models from scratch. The first model is the All Terrain Armored Transport (AT-AT) Walker. I am starting with the feet and will work my way up. As I gain more experience with modelling in A:M, I will go back and tweak parts that I am not entirely satisfied with and add detail that I am not quite sure how to do yet. This is the same process I used while learni…
Last reply by gazzamataz, -
- 1 follower
- 14 replies
- 1k views
I've trie to figure out the timing without a lot of success. Is there some guidelines to apply? I have attached my WIP file for some ideas for anyone that takes thier time to review it.
Last reply by Rodney, -
- 2 followers
- 9 replies
- 1k views
This is the biggest format I ever had to output from A:M for. It only needed to be 30dpi, but at 32 feet wide, I had to crank out about 30K pixels wide. That certainly had my computer begging for more (memory)! I put some pictures of the finished billboard near the top of my home page: Atkinson Productions web site
Last reply by gazzamataz,
