Showcase
Subforums
-
- No posts here yet
-
A:M Stills (70,487 visits to this link)
346 topics in this forum
-
- 35 replies
- 3.5k views
Robcat has offered me a chance to do some learning. He has three courses to teach. I would very much like to have others join in on this class and if your interested please post here to become involved. Once we have enough I will defer control to Robcat who will be doing the teaching. The animation courses being offered are the following: 1 bouncing ball 2 broad jump 3 three emotions On a side note, Rob if no one is interested I am still very interested in learning what you have to offer.
Last reply by Dpendleton77, -
- 1 follower
- 10 replies
- 2.7k views
Hi my name is David. My first post and first clip done in AM. It took about eight months. Its a Christian based animation so if that is not your thing please don't be offended. Sorry I took the link down. Video no longer on youtube.
Last reply by DavidDenzill, -
- 1 follower
- 14 replies
- 2.5k views
some dance-animations i´ve made for the prolight&sound exhibition 2012 and 2013. i´m not tooo happy with the second one, since i´ve had only 4 days to animate, so there was no time for polishing. turns out animating a robot-dance is kinda tricky, who would have thought? BiHPOnIOy8c dosPLVOo9xk
Last reply by jason1025, -
- 4 replies
- 1.2k views
As threatened. The second ever project in AM. This was the original version. It later got re animated and edited down to three days rather than five but, that version has some horrible compression artefacts on it and still has a large file size. This has been chopped a bit but ( WARNING ), the music is still as annoying as ever. There are many things I'd change if I did it now but I was pleased with it at the time. ( about 9-10 years ago). I still like the idea though. The figure models were adapted off the CD at that time. Rather inexpertly, as you can tell. simonLC_320.mov
Last reply by Bruce Del Porte, -
- 6 replies
- 1.2k views
This was the first project I did in AM. My nephew was trying to make a career as a racing driver and this was an attempt at raising some sponsorship. It was only intended as a fist pass at the idea and, if the company was interested, then we'd get the polished version done. It never got finished because, they were interested at first but, just as we started to look into it more, two of their marketing dept died with stress related problems so we got lost in the process. The nephew, Ben Clucas, then 17/18 now 29, is still working as a racing driver, albeit not on the plane initially hoped for. There are lots of clips of him on Youtube, including an amazing race a…
Last reply by Simon Edmondson, -
- 8 replies
- 2.8k views
It has been a while since I made a complete micromovie. Let me say, doing a study of Alfred Hitchcock's directing through one of his masterpieces has been a great learning experience. I had a great time doing this project. I was determined to finish by year's end and I made it with a week to spare! Keeping true to the "One-Man-One-Computer" ethos, I used a number of the public models very much to the improvement the piece. Let me give special kudos to the builders of the "Rear Window" set. It is a wonderful miniverse. The set looks great from long shots to extreme close-ups. Bravo and thank you to the organizers and contributors to the 2012 Forum Project. …
Last reply by Bruce Del Porte, -
- 4 replies
- 1.3k views
I'd like to thank Al Trafalgar of 'Al's Greebles' from the Contributors Cue, for his great plumbing geometry. I made myself some new imagery for my Facebook page, and if anyone would like to borrow... feel free!
Last reply by TheSpleen, -
- 10 replies
- 1.5k views
I proposed this challenge in another topic, and decided to create a specific topic for it. Analyzing the views, how should be the 3d model? If you don't want to see the solved model then not scroll down Using toon render/lines only your model must looks like this.
Last reply by largento, -
- 2 followers
- 38 replies
- 4.7k views
drawing contest for "pendulum" http://2danimator.ru/showthread.php?t=5287 "... and now the music and a scrolling ..." Loops http://www.yapfiles.ru/files/343361/pendulum2.swf
Last reply by serg2, -
- 5 replies
- 951 views
Hey guys, i wanted to test the render speeds of my new machine so i threw this together and used net render to see how long it would take. Xwing_in_space.mov 1280x720p 30fps global lighting with full AO AO at 50% multi pass x 16 output .TGA 10 seconds total (300 frames) Netrender 5 slaves total time 1 hour 16 mins sound effects were done in post.
Last reply by TheSpleen, -
- 1 reply
- 765 views
Found these models on my machine and couldnt resist doing a render. 7 min render IBL lighting 16 passes + AO
Last reply by Rodney, -
- 2 replies
- 851 views
Decided to play with and update then re-render my Space Marines project (image). One day I will fully rig these models and animate them.....
Last reply by itsjustme, -
- 2 followers
- 10 replies
- 2.1k views
Vr3QR5PC2lI Has anybody seen this? I wonder if this guy posts here.
Last reply by Rodney, -
- 2 replies
- 1.3k views
As seen on Youtube: eogVzChpVQk Created in A:M 2006 by StusMagicBox.
Last reply by Dpendleton77, -
- 1 follower
- 6 replies
- 1.3k views
How to make a Cucoloris? I know I could model something, but I think AM has an advanced lighting feature that i have never seen used but have heard of that works for this purpose. Robert are you interested in a vid tutorial? Here are the product shots I am working on.
Last reply by jason1025, -
- 7 replies
- 1.4k views
here´s some stuff i´ve made lately with the help of a:m. 1. DDQ Series video: those are touring class PA speakers which i´ve designed two years ago. i did the layouts for those speakers with a:m (they looked a little different in the development stage, some things were too difficult to realilze in production). so the design for the speakers was made in a:m, the speakers you see in the video are real video-shots though. the only 3D footage besides the lines-stuff was the compression driver, i had to model it in a:m, because the prototype we filmed didn´t have the right driver built in the animation was made in after effects, the lines with a plug-in called plexus. …
Last reply by jimd, -
- 1 follower
- 21 replies
- 2.2k views
I'm trying to create a puff of smoke from the end of my flint lock pistol using the Smoke Tutorial and TAOAM but I cannot get AM to set any keys on the smoke parameters (sprite) Any suggestions?
Last reply by robcat2075, -
- 4 replies
- 990 views
I'm working with a rock being struck by lightening. Have got the lightening to look the way I want it to but, would like to make the rock heat up as a result of the strike, with the colour spreading down from the point of impact Initially I had thought to do it using a diffuse colour change animated through different layers but that started to look like a Doctor Who scarf made out of stone, with colour bands. Can anyone kindly suggest a method that might work ? I wondered about animated maps perhaps ? regards simon This is Ray on his rock.
Last reply by Simon Edmondson, -
Hi friends... I am editor of a live talk-show ( livevideo all mondays 7:30pm brazil ), which deals exclusively about my soccers's team Operário Futebol Clube ( In fact the team is not mine of course). Its mascot is a rooster.. then I decided to model one to use in some animations between interviews. tomorrow I'll begin to SQUETCH it....
Last reply by robcat2075, -
- 1 reply
- 1.6k views
Charles Babbage ("Dr. Phibes" on the forum) noted on Facebook that he used A:M to design the fabric patterns for this "Kirby" acclaimed by one observer to be the "cutest mascot" at PAX2012. Charles also explained that the person inside the mascot navigates via a video camera in the character's mouth. Other Related Links of interest: http://www.hash.com/forums/index.php?showtopic=41888
Last reply by Dpendleton77, -
- 1 follower
- 20 replies
- 2k views
Hello- I apologize if this has been answered before but I did a search for "3d printing" and ".STL" in the AM forums search and it came up blank...so here goes: When exporting an .STL file with AM17, does the mesh need to be continuous to be recognized by the printer?...or can there be multiple models intersecting each other, without there being one unified mesh? (see picture)... In this simplistic picture there is a sphere (figure A) with some of the points pulled out..and then there is a sphere (figure with a cylinder intersecting. Are both of these models "legal" to the 3D printer? Will both models "print out" accurately? Thanks for any insigh…
Last reply by pixelplucker, -
- 6 replies
- 1.2k views
well I'm going deep in this tool and in my tests all bump maps are black .. is there some tip to create it ?
Last reply by Xtaz, -
- 9 replies
- 1.5k views
http://www.hash.com/forums/index.php?showt...mp;hl=Composite While looking for more info on compositing I came across this thread from 2006 about a plug in that Marcel Bricman had written for T Wessling. There was some talk that he may have introduced it to the wider AM community later on and I wondered if there was any news on that now ? regards simon Apologies. Just found another thread about Sumi and couldn't stop this one. My Mistake.
Last reply by robcat2075, -
I have been working to much 6 days a week 65 to 70 hrs a week.I Have not posted in a while .I still come and check out the Great stuff created by everyone had a little free time made this Simple beer can
Last reply by robcat2075, -
- 2 replies
- 894 views
extrasCD/models/anime/boy he appears fully rigged yet it is like the rig is turned off? Any clues?
Last reply by TheSpleen, -
- 3 replies
- 894 views
Hey guys, sorry if the topic description made it sound like a 'marijuana reference'... I use patch images a lot, they RULE! And lately I have been playing with eXporting A:M data so I can use it in Element 3D, Cinema 4D (Maybe I AM stoned!) and trying to get A:M/bake imagery to play nice with polygonal UVW placements(making slit-wrist motions!) and I notice that patch images seem to be 'immune' to the whole baking process. ALSO- any links to some good tuts on this subject?
Last reply by Rodney, -
- 8 replies
- 1.1k views
Have had difficulties with mystery channels appearing in the PWS ( I hope I'm using the right word with channels ? ) and the rotate handles on bones suddenly growing very large but never known what might be the cause. Yesterday morning, I went through all the models in the chor and deleted the oddities then worked on the walk of one of the figures, having hid the other models. In the evening I unhid the others and prepared to render it out, only to find that the mystery channels had reappeared, along with the elongated roll handles. I've circled both in this screen grab. The problem seemed to come about when the models were group selected in the PWS…
Last reply by NancyGormezano, -
- 12 replies
- 1.8k views
For a tutorial, I'm looking for example images of the following. Images that in a one-second glance can demonstrate the idea... Motion Blur Depth of Field Shadows Ambiance Occlusion Reflections Particles and Hair Subsurface scattering Fog Toon Render Field Render Stereoscopic 3D Plugin-shaders I have candidates for some of these but perhaps you recall better ones. If you can think of a good image, post a link to it here. Thanks!
Last reply by robcat2075, -
- 2 replies
- 822 views
Have been having a number of quirky problems recently with the display of models in the chor. This is the latest one. As you can see in the picture,the model is active in the properties section, but in the view window only the bounding box shows up, not the actual wireframe of the model. If a partial quick render is done of the same view port, the models show in the render, while still being invisible in the view !!! It only seems to happen in this chor, the 4th, the others seem ok. Is there an easy explanation I might be missing? Any help gratefully received. regards simon Ps It had seemed resolved but, still getting problems with wavy splines o…
Last reply by Simon Edmondson, -
- 2 replies
- 846 views
I just noticed that there are more real-time render increments now 1,4,16,32,64, adaptive
Last reply by Rodney, -
- 2 replies
- 847 views
I've spent some time getting the fourth shot of the current short animated. At the beginning I constrained the flowers o the hand of the male character and that held all the way through. I was just going through and setting the pose sliders for the facial features when I noticed that the flowers were no longer constrained to the hand. Checked the settings under properties but they hadn't changed,but the flowers were no longer in the hand. One anomaly I have noticed is that a W value seems to have crept in to the rotate properties ? Not noticed that before? X, Y, Z I now start to understand but W ? Has anyone else experienced this and, if so, how did you fix it ?…
Last reply by Simon Edmondson, -
- 10 replies
- 1.6k views
I kind of missed the deadline here, but I didn't get back to my computer before the end of the Christmas holiday visiting my parents. So this ugly thing has been decorating my grandma's Christmas tree for the past 25 years. I drew this thing when I was five years old. I bet that if it could talk it would probably whisper something in the lines of "please kill me...." Anyway, just for the fun of it I had it scanned, made a simple model for it in A:M and added the decal. Also added a simple rig and made it move for a few seconds. It would be fun to collect all sorts of children's Christmas drawing and make an small animation out of it, guess I have to search my parents …
Last reply by Gerry, -
- 4 replies
- 969 views
While awaiting feedback on the sneaky project I did a test for the next one. This is for some cartoon clouds and was done with cycling maps. Back to the other work. simon Cloud.mov
Last reply by Kamikaze, -
- 1 reply
- 806 views
my new company i started working for 2 months wanted a background image for new machines built in house that was to be sold to customers. this was what came out of that. enjoy the background as a freebie from me
Last reply by robcat2075, -
- 1 follower
- 4 replies
- 1.1k views
I'll give you the kindle version of my newly released science fiction "The Spiral Slayer-Book One: Encounters" if you have a kindle, will read it and take the time to post a review on Amazon.com. Post reviews here: http://www.amazon.com/The-Spiral-Slayers-E.../dp/B008STATCO/ Cheers, Rusty
Last reply by rusty, -
- 11 replies
- 1.8k views
I had chance this last week to do a scoreboard 'halftime' animation for my client Belle Tire... one of those things 'for the kids' where the stadium DJ will assign a random seating section to the outcome... and if chosen that section will get a prize... like a pack of M&M's or a free soda. This one was for the Grand Rapids Griffins, a Michigan Junior SemiPro hockey team- and they wanted a 'shell game' with 3 outcomes starring Tireman in an ice-hockey environment... Belle Tire's cartoon mascot that originated in 1922 and whom I have been animating in A:M for the past few years. I started animating the pucks sliding around and quickly realized I was in 'keyframe h…
Last reply by RS3D, -
- 9 replies
- 1.2k views
hi, Any one know a simple way to repeat 11 frames of an automated decal back and forth for 20 seconds? There is no repeat I can see. Thanks, Rusty
Last reply by rusty, -
- 16 replies
- 1.5k views
Dan is struggling to meet a deadline over in another topic so I'm starting this here to collect general advice. For those that feel they can assist him in getting his job rendered please comment over there: Dan's topic Meanwhile... we''ll collect some thought, theories and practices for faster rendering here in this topic so that we can bravely face the next deadline.
Last reply by Kamikaze, -
- 15 replies
- 1.3k views
Okay, here's a silly quesiton... Let's say I have an animated sequence with keyframes in various locations spread throughout the sequence. In other words... it's a real mess. Is there a way to force a keyframe for every bone that has a keyframe assigned to it on every frame of the animation? My thought is that while I want to reduce the number of keyframes I don't want to risk altering the current animation to any great extent. Keying every frame would allow going back in and deleting keyframes while knowing that other keys are still in place. This is an approach I've found to work really well with simulation (such as Simcloth which places a keyfram…
Last reply by Rodney, -
- 4 replies
- 1k views
I've got a 45 frame walk cycle. When I drop it onto a model, it's fine. But when I constrain the model to a path, it wants to make the walk cycle around 1/10th its length, like 4.5 frames, so in a 90 frame clip the walk cycle loops around ten times. I feel like I've seen this before but I cannot figure out how to fix it. This is happening in both v 16 and v 17.
Last reply by robcat2075, -
- 5 replies
- 802 views
Some may already know it, other may not: The 3We XMas-Calendar is online again. Everyday another video (funny commercials, interesting videos, nice looking stuff) and of course A:M had to do with it too . http://advent.3we.de Have fun! See you *Fuchur*
Last reply by kwhitaker, -
- 5 replies
- 1.1k views
Hi, I have a material that's supposed to create an atmosphere around a planet... however it won't work, its missing something. I need to create a green glow around these non-green spheres. Anyone have any ideas? Going to look at 'material effect' see if that's an option. Other wise I do not know how to make a material extend beyond the sphere it's attached to. Thanks, Rusty
Last reply by robcat2075, -
- 9 replies
- 1.2k views
Steffen Gross tests unique opportunities animate parameters in plugin SimCloth. The original idea was to make a melting objects or breathing. Test: Note: SMART SETTING - i change parameters (Stretch Stiffness & Shear Stiffness) in mode -> BEND TYPE= BEND SPRINGS, BUT!!!! Before symulating i set parameter BEND TYPE = BEND ANGLE Maybe you do not provide a such ways But it turned out great!
Last reply by serg2, -
- 10 replies
- 2.4k views
Here is one of the newest animations for one of our customers done in A:M and AfterEffects. Hope you like it: WC-Wunder - 3d Animation See you *Fuchur*
Last reply by Fuchur, -
- 1 follower
- 10 replies
- 1.1k views
Here's the finished animation for our company Christmas greetings. Like the man said, Season's Greetings! http://www.visualexllc.com/vlexholiday2012...sAnimation.html
Last reply by itsjustme, -
- 13 replies
- 2.9k views
lately i´m experimenting a lot with some sort of fluid simulations in after effects with the help of some plug-ins. these works also involve a:m, so i thought i would post them here. hope you´ll like them... cWFGoeqU1eI NllCg6wyOwc a:m: the ufo & the squid a:m: the helicopter, the girl and the soda can
Last reply by Rodney, -
- 1 reply
- 953 views
Every year since 2007 I have been creating a video to hype up our family's annual Carpet Ball tournament. Some of you here may recall me doing my WIP threads every year and im sure everyone was questioning where it was. But probably not I didnt have quite as much time this year to put into it. Next years is going to be far better. I am planning t recreate new models and retire these characters. They have had a good run but its time to make something I am more proud of and would show to potential employers. This year's was just to be more 'epic' and I based the whole video around the song With Great Power by Immediate Music. Very epic movie trailer style music.…
Last reply by NancyGormezano, -
- 1 reply
- 719 views
Hi Everyone, I was thinking of some of the commercials I see in the theater so I thought about making something a bit different. Would like to hear what you think about it. Did 30 sec. in AM then added the other with Final Cut X. Working2.mov
Last reply by robcat2075, -
- 5 replies
- 1.3k views
Plugging away steadily I'm trying to get to grips with smartskin. watched Roberts excellent video and making progress. A quick question though, Do I have to make a new SS for every joint as a separate relationship or, can they all be done in one reltionship ? eg, making an initial SS for right forearm can I make an SS for the wrist in the same window/relationship or does it have to be a new SS/relationship ? regards simon
Last reply by Simon Edmondson, -
- 8 replies
- 1.1k views
I downloaded and played with Gerald (Fuchur)'s GREAT project from here: http://www.hash.com/forums/index.php?showt...cloth+soft+body LOVE playing with this stuff! I find it fascinating that every time I re-simulate I get different results- even with the blocks in the same initial position. BLOX.mov
Last reply by steve392,
