Work In Progress / Sweatbox
Subforums
-
Showcase (57,711 visits to this link)
-
- 530
- posts
-
A:M Stills (86,997 visits to this link)
-
Works In Progress (WIP) (59,622 visits to this link)
-
- 3.1k
- posts
5,158 topics in this forum
-
Made this for the ten second club but must have submitted it late because it didn't make it in for voting. cheers [attachmentid=14805] H.264 compression [attachmentid=14807] feb_10sec.mov Feb_10sec_club.mpg
Last reply by cory, -
- 7 replies
- 959 views
Those of you who are familiar with my work know I'm not a render monkey--I love beautiful images as much as anybody, but I'm too impatient to wait for them (or to learn enough about lighting to make them). However, my recent Olympic vodcast got such a good response I decided to re-render the last shot, where Shaggy falls into an iced-over swimming pool. I used Image-Based Lighting for the general outdoor look, and decided to try soft reflections on the ice and see if it would look any good. Hot DAMN! This is with only 10% sampling on the soft reflections, and 9-pass multipass. It really looks like ice, doesn't it? (Of course, at eighteen minutes per fram…
Last reply by oakchas, -
This is my first attempt at radiosity rendering in A:M. It took me about 2 hrs to model, 1/2 hour to setup and 22:25 to render at 1024x768. Not bad seeing that I used materials for everything except the white tiles on the chessboard. Space backdrop courtesy of NASA. I hope ya like it. Let me know what you think.
Last reply by arkaos, -
My new splash page
by Guest william40- 11 replies
- 758 views
Hello all, It has been a couple of months until I posted something. I have been working on my website and on there I have characters created in Am. (All except for the rabbit where created in AM.) As you will see I am a fan of toon shading. I do photo realistic as well. I just have the about page done and contact. I am putting the animation together to post real soon. Have a look.... www.hennesproductions.com Cheers, William
-
- 1 follower
- 16 replies
- 1.8k views
Hey, I've been preoccupied for a while, but I'm back now. Here's a glimse of my next project, although I'm not looking for critiques at this point: http://www.noah3d.com/bridge.html http://www.noah3d.com/watergate.html http://www.noah3d.com/tomb.html
Last reply by steve392, -
- 1 follower
- 17 replies
- 2.1k views
I have been updating my demoreel quite a bunch lately. Added some new stuff and rerendered most of the old stuff (v.13 IBL). I guess I should have continued in the old thread but the old one is a bit outdated, so I hope you guys forgive me starting a new thread The demoreel do have some jagging in both the sound and the motion due to an bug in the editing software. Anyway. Here is an direct link to the demoreel: Approximately 18MB, Lenght: 2:26. Right click and save target as.... -=QuickTime=- -=Windows Media=- Let me know what you think Comments and crits are appreciated Regards Stian
Last reply by agep, -
- 16 replies
- 1.5k views
Hi folks, This is my attempt at modeling while taking a break from TWO. It is far from complete. I still have mechanical legs to make & attach, cockpit, colors & textures. Thoughts, ideas, critiques, are mosr welcome. [attachmentid=14744]
Last reply by Dhar, -
- 1 reply
- 445 views
hey i got this program for christmas and i tried it today and made something i have one question how exactly do you made like an even box with straight sides cause the lines are like curvey [attachmentid=14743]
Last reply by Ganthofer, -
- 12 replies
- 1.6k views
it is the room of a kid of a personal animation in work... any suggestion or opinion, WELCOME thanks[attachmentid=14728][attachmentid=14728]
Last reply by ArgleBargle, -
- 1 follower
- 9 replies
- 820 views
I am wondering how to make a camera's orientation follow the twisty curvy paths orientation like the one shown in the video, or more importantly, how to make a coaster car follow the orientation of the path. Making the camera or object follow the track is easy enough by making one of the pipes splines the path. Also, I was able to create two path constraints from the camera to the two outside rails which keeps it from moving into the mesh when the track twists and turns. I thought that would actually cause some weird circular constraint problem but it didn't. But I would like for the camera or for the coaster car to be oriented the same way as the track. In other wor…
Last reply by Rodney, -
- 1 follower
- 12 replies
- 1.1k views
well this isn't much for a start but at least it is a start...I'm still tweakin' up the end part when he stops after rollin' across the thing. I think what's gonna happen next is he's gonna go back around and do it again except the plank won't move when he goes up... I won't say any more about the ending botexploresplank1.mov
Last reply by jamagica, -
- 0 replies
- 296 views
[attachmentid=14712] [attachmentid=14711] simple constraints one per box boxtest.zip boxtest.mov
Last reply by johnl3d, -
- 1 follower
- 20 replies
- 2.4k views
Hello all, Here my latest character. I tried to reproduce Shaak Ti, a female Jedi in Starwars Episode II. Modeling and rendering in A:M v13 alpha 8 with AO and IBL
Last reply by Fab, -
- 9 replies
- 963 views
Hi! I write you from Russia. Recently has made girls P.S. Badly I know English language [attachmentid=14672] [attachmentid=14673] [attachmentid=14675] [attachmentid=14676] [attachmentid=14674]
Last reply by Temka, -
- 0 replies
- 397 views
Thanks to all the respondents. Here are the results (as of 2/24/2006 7:30 AM EST) in graph form (engineers like graphs). When the results are listed by category: Hobby-15 Freelance-8 Limited Freelance work-3 Freelance AM Main tool-3 Contests-2 Other-2 AM at Work-1 After combining the categories (Hobby & Contests) (Freelance, Limited Freelance work, Freelance AM Main tool) I was surprised to see the percent of people using A:M for paid work. Somehow I had the notion the percent of A:M users doing paid work was around 10%. Now obviously this is not a scientific poll as there were 34 respondents out of a total user base of (thousands). It is…
Last reply by ddustin, -
- 2 followers
- 24 replies
- 2.7k views
In case you haven't seen it, Zach has a video podcast which he updates regularly with his work: http://www.hash.com/users/zachbg/vodcast.html His stuff is always great, but this week's Olympic-themed video is particularly hilarious. Zach probably has the most consistently laugh-out-loud animations, and I can't imagine why you wouldn't subscribe to this excellent podcast. Go do it now!!
Last reply by Rodney, -
- 20 replies
- 1.5k views
Here is a character is that I've been working on for a tiny short. Its a very simple character but I've been using it to try to learn to model and use the hair system. Over the course of the next few days/weeks, I'm hoping to tweak the model some, add a basic skeleton and set of controls, and possibly do an animation test or two in this thread. Suggestions in any area of the process at any time are greatly appreciated, Thanks, --Ross
Last reply by rossk, -
- 5 replies
- 783 views
there is hair groing inside my rat AND I DONT KNOW WHAT TEW DOOOOOOO
Last reply by oakchas, -
- 1 follower
- 18 replies
- 1.9k views
Here is a new revision of the mouth creature. http://home.alltel.net/collinsfamily04/walk.avi I like the skin on this one. Thanks a bunch to Will for the excellent tute on mapping! One point though, if you use the approach of using one image pasted "through" the body, (from one side) the bump map portion becomes inverted on opposite sides. Color is fine, it's just the bump map. Due to normal direction I suppose. I now understand how to use the UV editor, and it is a gas! Cory
Last reply by oakchas, -
- 8 replies
- 603 views
John Burch and I have been collaborating on an industrial visualization project. John has done an excellent job, particularly considering his exposure to industrial automation was zero before he started on this project with me. John's website is http://www.lizardfire.com check it out, he has some great stuff there, and also consider him for contract work. This image is for an automation company. Their client wanted to see a virtual example of what the 2d drawing looked like. The work is meticulous and requires great attention to detail. David
Last reply by ddustin, -
- 28 replies
- 2.2k views
I have always wanted to see what doom 3 would look like if I rendered it with radiosity. The game engine does not have any baking for lighting, so every light is ray traced. I've used the editor to take measurements of the garage I wanted to recreate, and I'm using textures from Doom 3 for all of the surfaces. The entire geometry took me around twelve hours to input into A:M, but the results are already very cool. Here is a render that I did yesterday with photon mapping but with no texturing. [attachmentid=14610] Since the image was rendered, I have added railing, more pipes, wires in the back area, and a few textures. The animation shows the room a bit …
Last reply by MattWBradbury, -
- 3 followers
- 85 replies
- 8.3k views
Went through my pc and came across an older project where I made a base female body (for something to work off from). So I decided to make my griffon project again which was why I was inspired to make the base body. Here is the finished head attached to my base body. Might be pointying her ears, I haven't decided yet. This is my first female head ever after I don't know how many years of modeling. I think it looks pretty good. Not perfect, but pretty good. Next to build clothing and armor for my griffon rider. Comments welcome .
Last reply by Paul Forwood, -
- 5 replies
- 840 views
http://www.happybigfun.com/Robotsrobotsrobots.html It is my intention to make a monthly five minute animated podcast (web series) featuring sentient robots at war. It will be called "Robots Robots Robots!" Right now, none of them can change forms, but at some point I'm going to try to make a robot that can transform. I won't use that term in the series cause I don't want to get sued. The plan, inspired by beast wars, is to make 8 robots, a few sets, and then continue to re-use those same models throughout the series. This will take some time to start up, but my hope is that it will only take a month to make each episode once all the models are made and I'm only …
Last reply by prometheus999, -
- 3 followers
- 44 replies
- 4.4k views
I don't think I've posted in the wip before! So here's my first time. Here are two models that I started building recently. I'll keep posting the progress here until they are done. Frank Silas http://www.franksilas.com
Last reply by Frank Silas, -
- 38 replies
- 4.4k views
It's a classic, the heavy push... I don't think they let you get an animator's license without one. [attachmentid=14573] Edit: The above file is in H.264 here's a smaller version in Sorenson3 [attachmentid=14596] heavypushsmall.mov heavypushsor250.mov
Last reply by Nik, -
- 7 replies
- 1.1k views
hi all, haven't posted here in a long time, been bogged down with school and such. I had a little bit of free time yesterday and i whipped this up...based on a 2000+ yr old sculpture, lol. Since i may not have freee time in the foreseeable future i'm only making this a bust, which i may take into zbrush, no animation though. C&C would be greatly appreciated, -Pancho
Last reply by Zaryin, -
- 10 replies
- 1.2k views
Hi everybody, My first bigger 3-D Animation job is online now and I am eager to hear your opinions. Its the middle-toonpart of a flash-animation. To view it go to: http://www.vw-polo.de then wait until the "real"-animation of the car has ended. Then you can choose > Helden (heroes ) > Gewinner (winner) > Abenteurer ( adventurer) now you get my toonrenndered animations ... at the end with "nochmal spielen" you can play it again. Great thanks to everybody, who helped me on finishing this job. I learned a lot ;>) Jake
Last reply by oakchas, -
- 1 follower
- 1 reply
- 441 views
hey guys haven't been here for awhile...well as you know I like making simple models for practicing animation with. Check out this quadreped model. in the midst of rigging still
Last reply by Dhar, -
- 7 replies
- 615 views
After I posted the two troopers and the tank, I was very pleased at how many people remembered Vaughn Bode'. As I've been working at getting the troops to walk [it's actually going rather well] I've had Bode' on my mind, and so, started digging out all the old comics from the vault. Here's a shot at Bode's star character: CHEECH WIZARD.[attachmentid=14551]
Last reply by heyvern, -
- 3 replies
- 793 views
From the Megaman series.
Last reply by Joe Gamblin, -
- 9 replies
- 793 views
Here's mine... Render and zipped file. Rename your original 'Default Chor.cho' file to something like 'Default Chor Old.cho'. Then place the Default Chor.cho from my zip file in your Hash Inc\V13.0 folder. I can create this for V12, but I am making this for the new Extra CD and V13 should be a done deal by then. EDIT: 8:30pm 02/16/2006, I updated the zip file... per Ken's suggestions, you can now drop a 7' character in the chor and it will be perfect. defaultchor_timelord.zip
Last reply by Rodney, -
Soft introduction...my name is Busby .... I am new to 3D and (of course) Animation:Master. I work with Colin Freeman and hence picked up the A:M bug from him. I have been working with this software for almost 2 months. My wife has since put a divorce lawyer on speed dial, but I am confident that I can win a balance between the family thing and the A:M coolness. I will make a more formal introduction elsewhere on this forum later..but.... I wanted to ask a question... This is Phifer............ [attachmentid=14466] I basically designed her to give me the most challenges to overcome and learn as much as I can with one character. I have run into…
Last reply by Zaryin, -
- 8 replies
- 1k views
I'm posting here from the main mailing list so I can add this attachment. This is a test of a few of the poses I've added so far. test.zip
Last reply by arkaos, -
- 6 replies
- 743 views
as I read through the newton physics and rebuild notes I had a thought. An hour and a couple of old models later I got this. Basically I took simple models and used the rebuild plugin to create panelled versions. I thought it was cool and potentially useful for high tech backgrounds, although it does waste a lot of patches. [attachmentid=14460]
Last reply by gschumsky, -
- 11 replies
- 965 views
Hi there, i was just trying to set up a scene with some dead trees which looks a bit spooky. Main focus is the atmosphere, which should be as eerie as possible. Enjoy. Heiner
Last reply by the_black_mage, -
- 0 replies
- 390 views
i was playing around with hash today and decided to try to make diffrent sets and lighting since im still not good at making people just decided to throw a chracter in there from the cd took about 8 mins to render used volumtrics with particles for the dust was trying to to get kind of moonlight night type of thing not sure if its the color or something else but something just seems bit off any helpful hints? [attachmentid=14456]
Last reply by thejobe, -
- 8 replies
- 695 views
http://images.heathnaylor.multiply.com/mov...pHYkI0MTTa2Hg== Long link, and long render time, 14 hours! Anyways, tell me honestly what you guys think of this latest creation, I haven't animated for a while so this was getting me back into the mix.
Last reply by dborruso, -
dust
by Bendytoons- 13 replies
- 1.2k views
This is fx work I'm doing for TWO, but I wanted to post in the general forum as well to get feedback and share the knowledge. dust.mov dust7.zip
Last reply by Dhar, -
- 6 replies
- 844 views
I built this Radial engine for my Corsair. I see a lot of new users are building the FW 190. This engine should work for them too. I've attached the project file. Ed[attachmentid=14439][attachmentid=14440] Radial_for_Hash.zip
Last reply by MMZ_TimeLord, -
- 21 replies
- 2.7k views
I am proud to announce the release of Froggy Boxing. This is a one punch and one block button mashing game. If you want tons of fancy characters and moves buy street fighter. If you want to beat up a frog, this game is for you. There is no installer, just download it to your desktop and run the exe file. Sorry there is no mac version of this game. Here it is: http://www.3dfrog.com/wips/froggyboxing/froggyboxing.zip I hope you have fun playing it. Pass it around to your friends if you think they will like it. Kids will probably like this game the most. Happy Boxing Mod edit: Dennis's website is n…
Last reply by lazz, -
- 1 follower
- 10 replies
- 800 views
Hi All Froggy Boxing will be done very soon. I wanted to post this little teaser movie to get you interested. The modeling and texturing and animation was done in a:m. It should be any day now. Level Design Dreams is just doing a few more things with the programming for me. The movie is about 3 megs and is a wmv http://www.3dfrog.com/games/movies/froggy2006.wmv I look forward to the release and hope you enjoy the movie. And oh yeah, froggy boxing is a free game. It is only 2 out of 3 rounds Sorry no mac version
Last reply by Kamikaze, -
- 1 follower
- 65 replies
- 5.7k views
Well, here is the 'in progress' renders of a section of the roadway deck and of the south tower. Lots of detail to add to the top of the south tower and more for under the road deck. Also there are many MANY other lights that are designed to illuminate the towers at night, so I'll be adding those as well. This model will have the lights added. I will probably need some help with that as I'm not quite sure how Yves did his skylights with only one light and the action added it numerous times to the skydome. I'd like to do the same thing here, where all the regular street lights are copies of one 'type' of light and the spot (klieg) lights for the tower i…
Last reply by case, -
- 1 follower
- 4 replies
- 1.8k views
I've got the front part of the bike almost finished, so I thought I'd post some pics: [attachmentid=14390] I'm trying to use the image on the cover of the DVD case as my main reference. I wish I knew how to take screencaps off of the dvd to use for other views. I have some views of the McFarlane model, but it isn't exactly accurate, and its scale is too small compared to the Kaneda figure, so I'm trying not to rely on those too much. This is going on my modeling reel, so feel free to crit the crap out of it.
Last reply by brainmuffin, -
Core My concept of the powering source for a giant berserker - a small self-contained sun. This image is just some basic shapes and textures before beginning to add lights and massive detail.
Last reply by MSFlynn, -
- 5 replies
- 945 views
Hi, I got A:M in januari this year (2006), this is my fifth still, ahere I used a handcrafted model other than a muk, bowlingball, etc. Niels. HalleluJah +JHVH+ Causion: The attached still is 860 Kb, 1600x1200
Last reply by luckbat, -
US Mail Box
by Dhar- 4 replies
- 614 views
I needed a simple US mail box, couldn't find one. So I made this to share with everyone. Has a bone for the mail slot door. Logo included in the zip file. [attachmentid=14363] Mail_Box_Model.ZIP
Last reply by arkaos, -
- 3 followers
- 16 replies
- 1.8k views
Hey, Here is a 3 segment shot I just rendered out. (about 5Mb) http://www.dustinproductions.com/files/Dustin-3-views.m1v It shows the same virtual scene from 3 different angles (actually this is the first time I have been able to get more than one camera in a live action environment to work). Of course after is been rendered I see all kinds of flaws, but knowing the keen eye here on the forum, I thought ya'll could tear it apart for me and point out the things to fix. Things I know are wrong. 1. Truck is too large 2. Car is too small. 3. Too much lean on the car going through the corner. 4. Seems to be on small deviation in the path (horizontal)…
Last reply by ddustin, -
- 1 follower
- 7 replies
- 1k views
Hello! I haven't posted in a long time...but I thought that my friends at Hash would like to see some old stuff that I recently revamped. The first you may remember from a while ago, but I recently went crazy in Photoshop and I think it turned out really well. The second is a newer one that I think turned out really well. The figure was done in A:M and then put onto the Photoshoped clouds. Tell me what you think![attachmentid=14353][attachmentid=14354]
Last reply by LeeAnderson, -
- 2 replies
- 379 views
[attachmentid=14342] [attachmentid=14343] nntest.mov nttest.zip
Last reply by johnl3d, -
- 1 follower
- 1 reply
- 518 views
I recently had a system and software crash that made the prj file not accessible. Sent the file to the guys at HASH. I then went on to another project. I received an email late yesterday afternoon with the corruption removed and the prj file restored. I did loose two models inside the project but received 90 of the file back. This has caused me to back up files off the system and back up individual models on so on and so on. So thanks to the guys at HASH for the help Steve
Last reply by KenH,
