Work In Progress / Sweatbox
Subforums
-
Showcase (57,502 visits to this link)
-
- 530
- posts
-
A:M Stills (86,790 visits to this link)
-
Works In Progress (WIP) (59,403 visits to this link)
-
- 3.1k
- posts
5,156 topics in this forum
-
I started this model-no rotoscopes/drawings or pictures by demonstrating to a friend how to construct an eye, then it sort of got fleshed out when I had nothing better to do. Now I cant help but feel I got something a bit wrong, but I may be too involved in his face. He seems to resemble me a lot as well.
Last reply by Tai Shan, -
Hello, I started a short film project called Gravity as a new years resolution back in January. I am now continuing the project in Hash from where I left off. I have a storyboard, a story reel, a character design, the actual character model, and the antagonist flying saucer. Neither the model nor the saucer have been converted yet, but I'm going to show them anyway. I'm still very new to Hash, so your crits will be very much appreciated.
Last reply by phatso, -
- 27 replies
- 2.3k views
Hey guys, I did this animation about a week ago using AMv14. I've tweaked it as much as possible, but something feels like it could be better. Since it was a test animation for a bigger project, I may not do any more tweaks, but I would love suggestions to make the real thing the best it can be. Thanks. Justin NanoWar2.mov
Last reply by jmart714, -
- 21 replies
- 1.9k views
there he comes... finally... the first of maybe a few shorts of "RUBBERGUY - TRAINING LESSONS FOR UPCOMING SUPERHEROES" (i know i forgot the "e" in heroes in the trailerscreen, will be fixed...) the idea was to make a squetch-rigged character (my first one with that rig so far) that can extremely bend (that´s his superpower ). i always wanted to make that kind of squetchy moves but never knew how to make that until i found the squetch-rig, thanks to all the guys who were involved developing it. then i remembered the sportgoofy-clips where goofy does different sport-disciplines and sucks at all. and i thought: "hey, why don´t you do that sort of thing with your chara…
Last reply by Gerry, -
- 1 follower
- 22 replies
- 1.4k views
I'm working on an outdoor scene that has direct sunlight and some shaded areas. Sprites are flowing from the lighted area into the shaded area, yet the sprites brightness does not diminish as it goes from sunlight to shade? The sprite particle is basically a white blob that stays bright no matter what the lighting conditions are. Can this be changed in the sprites properties? I want the sprites surface to be darker as it moves into the shaded area of the scene.
Last reply by Eric2575, -
- 1 follower
- 0 replies
- 352 views
Im looking for a model of a small baby that I can animate. He needs to crawl and walk, so I need movable limbs. Using AM version 10 and not very good at it. Is there a source to buy AM models? Most 3D sites never heard of AM.
Last reply by TVpro, -
- 2 replies
- 708 views
Hi all, it's been a while since I've posted but in light of the new Sarah connor chronicles I decided to attempt a Terminater model. Heres some early stuff as I am still shaping him up. Crits and suggestions as well as reference pics are welcome.
Last reply by John Bigboote, -
- 1 follower
- 14 replies
- 850 views
I've been focusing on rigging, stylization, particle systems, I thought it was time I concentrate on something new for a while. I decided to try and work on terrain. The first thing that came to mind (for whatever reason) was an oriental mountain top with a small pagoda, a waterfall, and an enlarged looking banzai tree. I modeld and textured the mountain...now I need to find (or make) a pagoda, and somehow a waterfall. If anyone has any suggestions for making a waterfall or has a model of a pagoda that would be great. I doodled a bad drawing to kind of get the idea of the layout. Thanks for yo…
Last reply by Masna, -
- 1 follower
- 26 replies
- 1.9k views
Hey everyone, I went out and got a new PSP game called Patapon. It's another fun, stylized game from Japan Studio. Playing it and looking at the 2D stylization got me thinking. "I wonder if I could make a 2D animation in A:M. Of course it's simple in Toon Render but I mean actually 2D. So I made a model of a Patapon off the top of my head. Everything is going smoothly so far but if anyone has any suggestion or ideas feel free. I attached some pictures of the project. ( I'm also working on TAO of A:M on the side lines; only four more lessons left. Thanks for your…
Last reply by Masna, -
- 1 reply
- 426 views
I'm trying to make a spotlight flicker... but i don't see an option to adjust the brightness.
Last reply by robcat2075, -
- 8 replies
- 677 views
made another 1.98 model this time of a rabbit and did a quick action combined with some chor action which I recorded with a black background with the alpha buffer turned on to get a series of tgas use the series as the sprite image this is the results ... bunnyanimated.mov Not really great but at least the animated sprites worked
Last reply by Paul Forwood, -
- 7 replies
- 645 views
Hi, I just wanted to drop a quick note about a short film production I'm currently working on with a buddy (I'm waiting on a render). The film is called "Lost Hallway". I'm handling CG and compositing for it. It's a very green-screen heavy job with a very tight deadline. I'm using Animation Master 15 for the CGI and Eyeon Vision for keying and compositing. The pipeline is Sony HD video camera at 60i to Avid, then export of each shot to individual TIFF files, which are then scaled down by Vision to make rotoscope images for loading into AM15. Modeling and rendering is done in AM, and animated to match the actresses (we used green screen tracking markers to get re…
Last reply by animas3D, -
- 1 follower
- 4 replies
- 589 views
I have been setting up a scene for my logo animation. In part of the scene the main character will throw an object into a cup. There will be other objects in the cup and I want them to bounce around inside the cup. I am not getting Newton Physics at all. I have seen others accomplish some neat things. I have d/l the pdf tutorial and can not get it to apply to what I am wanting to do. Any help? Steve Here is a shot of the room
Last reply by c-wheeler, -
- 7 replies
- 932 views
A new model I'm working on. He's the arch enemy of my fox charecter. He still needs to be "aged" a bit.
Last reply by ChuckGram, -
- 36 replies
- 2.9k views
I am far from done. All comment, concerns, and congrats are welcome.
Last reply by noober, -
- 8 replies
- 1.1k views
Does anybody have a model of Jesus or a man in robes? I need it for a project....please help Edit: Ok i think i found one but how do i install it? And if anybody does find a model, please still post it
Last reply by jirard, -
- 2 replies
- 310 views
injury.mov injury.zip Sorry thom
Last reply by John Bigboote, -
The Fallen
by Cross- 13 replies
- 1.6k views
New project that i just started on a few days ago, wondering if there are any rigging gods out there who could help out with the bones after i got done with the model... or if you can see any flaws so far, let me know. Level_53_Armor.bmp
Last reply by Teh_Demon, -
- 3 replies
- 463 views
I'm trying to put together a portfolio and I want to thank you guys for all your help and crits. I think I'm almost there. This is really an extended topic from the KeeKat's Secret and Lypsyching the cowboy where I asked the question on lipsyching methods. This is using the "manual" method; which at this point I KNOW gets the best results. Raven.mov This is the "long" one I was referring to to. Didn't take as long as i thought it would. On this one though, I don't think its as good as the Cowboy. I believe it comes from the poses which was mentioned in one of the other topics(go figure). The cowboy's poses were done by a master, and Raven's done …
Last reply by paradymx, -
- 1 reply
- 572 views
i was going through ideas of different types of animated textures, and this one i though look cool, so i thought i would show it. http://www.vimeo.com/760537 i made the textures in After Effects, a color, bump, and displacement map, i also used the displacement map as a specularity map. heres the project, the maps should be in it, if not, i can upload them here. Slim_pro.zip
Last reply by johnl3d, -
- 10 replies
- 1.1k views
Just an idea ..thought I'd lighten the mood smile.mov smile.zip another 1.98 project ...found out I will be working new shift next week so I should have more AM time
Last reply by phatso, -
- 1 follower
- 3 replies
- 782 views
Hello, been a while, I recently used A:M to build a mockup of a networking proposal for a presentation in my networking protocols class. This was kind of a last minute thing which is why it's so unfinished. I don't really have a use for it since I'm done with that class so I figured I'd let 'yall have it. Background info: I used the models to go transparent to show the placement of the networking cables in the walls, it got a wow out of the class and a "overachiever" comment from a peer. total construction time: 4 days. machines used: Powermac G5 A:M v15, Xeon PC A:M v14. download: Office ~2.1MB a few images:
Last reply by phatso, -
- 11 replies
- 987 views
So here's what I've come up with for my Brainfart character. I'm still rigging him so he'll be moving soon. If anyone has any comments or suggestions I'd love to hear them. Thanks, Andy.
Last reply by cuboos, -
Here is a model for my short film project. It is far from completed and this is not the main building model of the project but I put that together so I can start testing lighting setups. C&C welcome
Last reply by animas3D, -
- 2 replies
- 557 views
Hello Fellow A:Mers, and thank you for your time and assistance with my problem (beyond my own stupidity, of course). After recently upgrading to v15, one of my projects has lost all of its 'roundness'. Everything in the model now contains harsh edges, even spheres have become a lot of little straight lines from CP to CP. I did check to see if the Peak and Smooth controls would help, but alas, I cannot find an answer. I have opened some of the models that came with the program, like KeeKat, and he has not suffered any 'loss of roundness'(sorry I cannot describe this any better). BUT, when I do render my model, he returns to the nice smooth creature he was…
Last reply by sab819, -
- 7 replies
- 678 views
I added a skeleton to my ninja and everything looks great, but when i put it in an action one of the legs is raised. it also is affecting how it animates. I would greatly appreiciate it if some on would take a look at it and try to help. Here it is. Thanks, MasterFunk Ninja.mdl
Last reply by MasterFunk, -
- 1 follower
- 4 replies
- 411 views
I thought about this when I posted my first tutorial on johnl3d.blogspot.com I used a pose without explaining how... so I guess that should be my next tutorial. I find creating a pose to do an effect very useful . In this example to show what I mean I have a rough egg shape change color then disappear..go transparent.. I set this up with two simple poses..which are set up in the action window where you set up a new pose. I could have made an action but that would require more work and more setup in the end. Here I imported the same model into the chor and scaled it so each fit inside the other then simply move the pose over time for each one ...pose 1 to change the …
Last reply by paradymx, -
- 2 followers
- 9 replies
- 1.1k views
Over the past couple of years and I have used the standard lighting setup. Over the past couple of weeks I have been playing with lights. I have a couple of questions. I am building a room with can lights (recessed lighting in the ceiling). I want the can lights to light the room in an addition I will have a fill light such as a lamp. When lighting a room such as this 1. Is it best to light from the model, action, chor? If you light within the model I have had some issues trying to get enough light in the room. In the chor it is tough to position the light and you have to add to the model for each chor. 2. I remember the Yves did a tutorial on ligh…
Last reply by Shelton, -
I've made some images, but when i render, they just don't turn out quite how i want. here are the images i rendered. and here are the projects. Image_projects.zip so, what should i do to make the images more, realistic?
Last reply by KenH, -
- 0 replies
- 771 views
This is a car I built a while back. I saw some render settings on the forum and decided to try them out. I was so pleased with the first test render i figured i would post it.
Last reply by noober, -
- 4 replies
- 597 views
Take a look: http://www.youtube.com/watch?v=jRE4he3LT1I This is just a little teaser for a fundraiser show that I have coming up for the film. The dog and terrain are real stop-motion the rest is CG.
Last reply by John Bigboote, -
- 3 replies
- 541 views
Working on an Animation for my senior project. This is the Bellato's Massive Armored Unit (MAU) The "Catapult" I'm plannin on having a desert backdrop with multiple other Catapults falling in from air support and having returned enemy fire. Besides the Wiring in the legs coming through the plating on the foot and the lack of the shoulder net launcher, can anyone see any flaws in my work so far? Catapult_Render_Final.mov
Last reply by Cross, -
- 0 replies
- 470 views
By the way... I need short films to screen at this event. The dealine for submissions if May 1st. Get in touch with me. justin@justincurfman.com "TICKS" teaser from Justin Curfman
Last reply by Dascurf, -
- 10 replies
- 958 views
thank your visit
Last reply by mansonsoon, -
- 23 replies
- 1.5k views
hi @ all, here are some screenshots, renderings and a short qt-movie from the actual project i´m working on. please tell me what you think about the characters, lightning, etc, i´m sure you can find some critical points i haven´t thought of yet. i have a few questions: 1. the forces setting: i want to have a slow breeze flowing through the grass and the tree... the movie is my very first attempt with forces, i know it´s much much too fast etc... but i was wondering if anyone of you could give ma advice about the settings on the force and the hair-materials. sure, i could figure it out by try and error, but maybe some of you guys figured some good settings…
Last reply by Nuba X, -
- 2 replies
- 657 views
hi, my name is mark and i am interested in working with some people to do an animation based on warhammer 40k. I have a good grasp of animation master and I think that if I can get a bunch of people together that like warhammer and are interested in this kind of project we could figure out the fine details. let me know if you are interested. markd
Last reply by higginsdj, -
- 4 replies
- 664 views
thank for visit~~
Last reply by bigH, -
- 6 replies
- 994 views
http://www.vimeo.com/634392 the gun was made in A:M 13. i rendered the gun and then brought it into After Effects and added the muzzle flash and the blood. i rendered the gun in three passes, the color, the shadow, and the light.
Last reply by cuboos, -
- 7 replies
- 755 views
just for modeling...its not so well..but share with your..thank for visit.....
Last reply by thefreshestever, -
- 1 follower
- 18 replies
- 1.8k views
Here is a new character i created the other day. Simple model but is pretty fun to use. his name is Tot He has already been rigged and has a walk cycle. More to come.
Last reply by Jeetman, -
- 1 follower
- 4 replies
- 1k views
Hello Everyone, I've been working this animation for the Villikon Chronicles (www.villikonchronicles.com). I have posted the progress of the main female character Mysterre. The texturing will come soon. You can visit my web page to see other artwork and other progress.GraphicAnime Site: VillikonChronicles Project Another thing. If anyone knows about a 3rd party program that imports OBJ or 3DS models into Animation Master well, please let me know. I had someone send me a sentinal model that was done in Maya. He gave me the OBJ model. When I imported it into AM the splines of the model became very jagged and pointy.
Last reply by Tai Shan, -
- 3 replies
- 362 views
Just finished installing the 2001 Rig and started to animate in the Action window. But the Foot Targets are not attached for some reason. They don't affect the mesh at all. Where have I gone wrong?
Last reply by Kelley, -
- 1 reply
- 341 views
My brother and I have started to get tired of starting projects and not finishing them soo, we've decided to do something that is as simple as possible (asap ahaha). We got the idea from super mario brothers and also the other mario movie weve seen in progress on the forum except the main characters are the goombas. Hopefully this will be a learning experience with some effects and basic animating and modeling. First clip is a 360 of the goomba and the second is a cannon effect i've been working on. Rotate.mov Fire.mov
Last reply by Kelley, -
- 10 replies
- 993 views
Here's a progress video of the character in my avatar which I'm making for a project I'm working on. The head in the first frame is from a character I made previously so, this character grew out of that one. There aren't as many steps as I'd like but it's all the models I have. The original concept was inspired by a sketch. testbrat.wmv
Last reply by Kelley, -
- 1 follower
- 9 replies
- 1.4k views
I have begun my final project for Digital Film class. It is a humorous/macabre short entitled "Dogfood". The style is somewhat german expressionist, somewhat my own strange sensibilities. The man in it is tormented day and night by the barking dog in his neighbor's apartment, until he exacts his revenge. The man never actually sees the dog barking, so the script had called for a sillouhetted dog, rather than something too specific. Since I have no dog, much less one that would be willing to act in this part, I have opted to use a CG stunt dog. It doesn't need to be photoreal, just a suggeston of a dog. My digital film teacher has a vendetta against A:M th…
Last reply by frosteternal, -
- 12 replies
- 679 views
I'm down to the point where the "Opacity Over Life" attribute has to be set. I click on the 'Smoke' emmitter in Materials and the Properties table opens up. But when I try to click on "Opacity Over Life" and open the box to type in a new value, the Properties closes. How do I get around this?
Last reply by Kelley, -
- 1 reply
- 425 views
Ack...I did something a bit too quickly. When opening a project, I was prompted to click on where a model was located. I accidentally clicked on another model by mistake. I quickly exited out of loading the file. However, when I go to open the file now, it doesn't prompt me for the model again. I have now opened the project. Now, it would be simple if my project did not have any animation keyframes for the model that is supposed to be there in the first place. The model I accidentally imported in its place, is associated with the animated keyframes (both models are human bipeds and rigged exactly the same). Is there an easy way to replace the orroneous model with the…
Last reply by mtpeak2, -
- 5 replies
- 425 views
Ok, This was my entry: I made it from Floor Plans that I found on the web. Had I known there would be so many great entries, I'd have used some more elaborate plans, but then I probably wouldn't have had time to finish. Here is the model with no textures, just AO: Nearly all the textures came from CGTextures.com (I believe I used 5 images total). The background image is a photo I took here in the Hudson Valley. I had planned to do some landscaping with plants, but something went wrong somehow with the choreography file, and Cookie cuts wouldn't render right. I tried to reproduce the results in test choreographies, but sometimes I could, someti…
Last reply by dre4mer, -
- 6 replies
- 431 views
I'm trying to add some haze to a night scene, but all settings convert it to daylight [camera background color being white] I tried other colors, but they don't look right. I tried black, which preserved the 'night-ness' but loses the sense of haze in the fore ground. How to get a light haze with a night sky?
Last reply by Kelley, -
- 5 replies
- 569 views
Hi, I'm a returning A:M newbie who is finally learning this program using version 8.5. I know... I am creating an animation of a levitated deck of cards, and I want them to move from the deck to a magician's close-up table. Unfortunately, they seem to move on their own. I am using simple translation for movement. I clicked the "Make Keyframe" key at zero frames: I typed 30 (1 sec) in the frames window, moved the top card, and clicked "Make KeyFrame" I want this particular position to hold for 30 frames before moving to its final position, so I typed 60 into the frames window and clicked "Make KeyFrame" The card's final positi…
Last reply by Rodney,
