Open Forum
Don't know where to ask your question? Post it here and it'll find a proper home
Open Forum Rules
This is an open forum for discussing Animation:Master and discussions should relate to A:M in some capacity.
Ask questions. Share experiences. Outline goals and aspirations.
Discuss what you hope to accomplish with A:M and projects you are working on.
There is one rule: Be kind.
Posts that violate this rule are subject to removal.
968 topics in this forum
-
- 3 replies
- 852 views
On September 27th I ordered the $299 version of Animation: Master and the Tin Woodsman of Oz DVD. I haven't received my order as of October 20th. I emailed the Hash Store twice with no response, the phone number is no longer in service, I tried both emailing the hash support and using the contact form on the Hash support and contact page. I have not received any response to any of them. I checked just now and I think before when I checked my order it had the option of canceling each item, now it return. Does that mean it finally shipped or is it automatically closing out the order since it has been over 3 weeks? Is there any way to get a response to check the st…
Last reply by Zepros, -
- 9 replies
- 1.6k views
I have been searching for Barry Zundel's legendary tutorials online without any success. So I sent him an email, and marvelously, he has uploaded all of them to Youtube. If you search his name you will find them straight away. regards Mike
Last reply by WolfsongCG, -
- 1 reply
- 760 views
I'm searching for a toppic on this forum that had a wonderful animation of a "dying" candle on a secretary with a letter and feather. Searched all over the place but could not find it. Anyone knows what I mean or where it is?
Last reply by Madfox, -
- 1 follower
- 18 replies
- 1.9k views
Like the title says, looks great in HASH, but exporting to OBJ gets wrecked. Not sure what I'm doing exactly wrong, might be export settings... Or maybe I screwed up making the model... Goal is making something 3D printable. I've included the file if anyone wants to poke around. MG Rings Fix.prj
Last reply by fae_alba, -
- 4 replies
- 808 views
Just wanted to say a quick "thank you" to Rob for going to the trouble of running the image contests. It's always interesting to see the different themes and see what everyone comes up with. Thank you again, Rob, for your efforts.
Last reply by Roger, -
- 9 replies
- 1.3k views
I hate to admit. It has been a while since I have used AM ,although I have been here since version 8.5. I would like to make a perfect circle3d if possible and add text around the interior rim circularly and if possible make it spin. Hope all is well in the Am Community, Martin and Family,Jason, Robcat, Fuchur, Rodney,Yoda64,Will Sutton,JohnL3D, Nancy the list is endless all of you have have helped me so much in the past. God Bless All in the AM Community. Happy and Blessed Easter To All !!! may you and yours be safe and well, Steve (mulls on the forum) i stlll remember the "Hash Bash" Great time and memory (0
Last reply by mulls, -
- 3 replies
- 697 views
with high regards Bobby (Tawan Abhayasuvarna)
Last reply by Bobby, -
- 5 replies
- 1k views
I just bought the subscription version of AM, again. I didn't have to. I still had an active license. Get this, I bought it and there was NO LINK TO DOWNLOAD IT AT ALL!!!! I don't know who to talk to. I called the customer service line, no response. Someone needs to start waking people up. Saying that I am frustrated is an UNDERSTATEMENT. I AM LIVID. I am not going to request a trial version when I freaking bought a subscription.
Last reply by Fuchur, -
- 1 reply
- 680 views
So, my old computer died, beyond repair. I still have a subscription for AM. I tried going through the store and there's no option to redownload the program. Who do I need to talk to. There's still at least six months left on my subscription. The down side is that I have to completely re build everything because it's all gone. I learn to back things up, eventually lol. How do I get this updated? If it was as simple as just changing the license, I know how to do that and who to talk to. I'm at a loss. PLEASE HELP
Last reply by Fuchur, -
- 4 replies
- 825 views
Happy Birthday to long-time A:M-er JohnL3D! Have a great day and a great year ahead!
Last reply by Michael Brennan, -
- 0 replies
- 641 views
I thought 10 was the end, but now it looks like there will be an 11... https://www.cnn.com/2021/06/16/tech/windows-11-leak/index.html
Last reply by robcat2075, -
- 9 replies
- 1.1k views
I have been working on A spider man Thoughts on the spider on his back. Would it be best made with bump maps I have been trying to make in modeling just can not get it smooth with contours with back muscles .if bump map needs to be made I do not have PS no more.it may just have to be a decal. How would you get around this. is modeling it my best way keep working at it. Thank you
Last reply by robcat2075, -
- 0 replies
- 567 views
A lengthy Bloomberg article about the recent trend to flatten and simplify corporate graphics, for better and for worse. For instance... Debranding Is the New Branding
Last reply by robcat2075, -
I use a prog called Affinty photo and when I go to start it I get the splash screen and then it closes I was told that it an open cl problem but I cant find any usefull info on repairing it any one kno anything about it would be verry usefull thanks
Last reply by pixelplucker, -
- 1 reply
- 627 views
Hey Everyone. Great to see you all still splining and all. I'm about to "Re-Subscribe." BIG Thanks to Robcat for e-mailing me back with the new features since I've been away. Was wondering if you guys have a suggestion as to the most stable V.19 version. A while back, I encountered some issues with V.19 and had to go back to 17 and 18 to finish a project.
Last reply by robcat2075, -
- 7 replies
- 1.1k views
Have had animated booleans work but only with one bone in the cutter. Can't seem to get this one to work, am trying to get this "reveal" effect of these cords (threads) as though they're coming off of a spool. Anyone know if this is even possible or have any workarounds? Ribbon.prj Ribbon1.act Ribbon1.mdl
Last reply by svetlik, -
- 20 replies
- 1.9k views
Hi All, I'm new to Animation Master (I just started using it today), and I'm encountering a problem when I try to add a dope sheet. I can type a sentence, but when I OK that Animation Master crashes out. I've tried different sentences, and different sound files. I'm not sure if this is related, but when I scrub through any sound file on the timeline, I don't hear anything. I'm not sure if I'm supposed to hear something, but the tutorial seems to indicate I should hear the sound. A I doing something wrong? Do I need to configure something? Any help would be greatly appreciated!
Last reply by robcat2075, -
Resampling
by Madfox- 30 replies
- 6.6k views
Surfing on the board I came to an example of someone who wanted to explore the new advantages of AM17. It was an example of, I think resampling a model. It had a model cached out locked and it showed how to add new splines on the model that were positioned with help of the magnetic mode. In this way it is possible to recreate the model in another spline fetched . I looked several times but I can't find it.
Last reply by Madfox, -
Alpha channel
by MJL- 1 follower
- 3 replies
- 858 views
I was having a couple of problems. Updating to V19.0o solved one but not the other. The one that I'm left with is this: It used to be that when I rendered out to a PNG, the background would be black during the rendering, but the object would render with out a background. When used as a decal, only the object would apply. All of a sudden, a PNG now renders with a separate "photo" labeled the same with a "-Alpha Channel" added to the name. As far as I know there are four places where you can turn on or off "Save with unpremultiplied alpha channel". 1. the Rendering tab in the 'Tools' menu, 2. in the 'output options' of the camera object property menu, 3. the …
Last reply by Michael Brennan, -
- 13 replies
- 1.9k views
Hi, So I learned the exporting process how could I import my model with the textures and maps?
Last reply by Fuchur, -
- 1 follower
- 3 replies
- 1.2k views
Am I the only one having trouble opening the AM Films catalogue?
Last reply by Madfox, -
- 1 reply
- 823 views
A brief history. I bought the subscription back in November of 2020. On December 4th of the same year, my computer died (motherboard, video card, powersupply). The hard drive was undamaged. Anyway, I had the machine repaired. Everything's working the way it should, but I couldn't get AM to load. So I uninstalled it, then reinstalled it. Now it's asking for the activation key which I put in and it won't take it. It gives me three tries and at the end says that the key is already in use. It is, by me. I contacted support and got an auto reply to contact Jason Simonds on the forum but I have no idea where he is on here.
Last reply by robcat2075, -
- 4 replies
- 1.1k views
Just days ago I found myself wondering what Disney might end up doing with Blue Sky Studios which was part of their recent acquisition of 20th Centry Fox. Even before I got a chance to google it... into my news feed came the reports that Disney would be shutting down the Studio. Several old time Animation:Master veterans work there... a few since the very early days of Blue Sky Studios... and here's hoping they make the transition well. I saw in a separate report via Linked In that one Blue Sky Studio animator in particular, Teresa (Nord) Storhoff has recently been promoted to Training Lead which if true would suggest a role in transitioning some of the 450 emp…
Last reply by Rodney, -
- 5 replies
- 863 views
Ghastly and miserable, the previous three days in Texas were. Winters here are usually "mild" with maybe one day with snow and several nights where it gets below freezing. And it's been trending warmer over the last few decades. But last weekend the coldest weather in all the time I've been here arrived and somehow caused a collapse of the whole electricity-generating system. They warned us in advance to expect rolling blackouts of 15 minutes to an hour. I was ready for that but at my house the power went out and stayed out for more than two days. Electric heat is all I've got so this is what it came to... warming my feet by candles. That wa…
Last reply by robcat2075, -
- 0 replies
- 451 views
If you like long articles with narrow focus, NY Times has one about the sudden influence of Japanese style in the 19th century How Japonisme Forever Changed the Course of Western Design Although it is not covered in this article I imagine the graphic flatness and clarity of Japanese drawing was some influence in moving newspaper cartooning away from the over-detailed and over-rendered style of a Thomas Nast in the later 19th Century to the simplicity of a George "Krazy Kat" Herriman in the early 20th.
Last reply by robcat2075, -
- 7 replies
- 1.2k views
Is there discord server to join?
Last reply by robcat2075, -
- 1 follower
- 5 replies
- 989 views
Reaquainting myself with AM. Currently using AM 64 bit v19 on Windows 10. Way back I used to use MOV a lot. Since 64bit does not support outputing to MOV I am using AVI YUV at a output setting of 1024 X 768 (or larger) for a quick prview test. When I use Quicktime the movie inspector feature of QT shows only a max of 728 X 476 resolution. This applies to VLC as well. Cannot find anywhere that AVI is limited to that resolution or that AM is limiting it. What s up with AVI? Help.
Last reply by Fuchur, -
- 0 replies
- 711 views
Well, now having used the replacement Animation Master v15 DVD since last February, I am hoping to get the offered non-expiring, Animation Master ver. 19 at the trade show price of $99.99 , as you offered last Jan.-February. Is there now a version 20 or is that included in the non-expiring terms? I have unable to build a new machine in 2020. If I install it on the old laptop and later uninstall it and install on the new machine, will that work or is it one machine per life? The old laptop uses a software version of OpenGL, will that work for now? It works (slowly) on other software. What do I need to do to get Ver. 19 at the offered price. An email was sent earlie…
Last reply by VRMAN, -
- 13 replies
- 1.7k views
Well it is good to be back. Been way way too long, but work has had me flat out since July and will continue to do so thru the end of the year. I hadn't done anything with Papa Bear, contests (who won the Prehistoric one anyways?) or 3d printing. Now, I have a request. I have a good friend who really is into Rocky and Bullwinkle, and has requested a 3d print of the two of them. I don't have nearly enough time to model them, print and finish them before the final years holiday, so I'm wondering if anyone has a model or two kicking around? If not, does anyone have the bandwidth to do some modeling for me? I am willing to pay for the work, nothing is free in this w…
Last reply by Madfox, -
- 0 replies
- 493 views
Much like how we do textures in CG, vinyl "wood" flooring is really just an image applied to a surface. But carefully chosen texture names can go a long way to suggesting the allure of natural, organic substances Vinyl samples seen on Craigslist...
Last reply by robcat2075, -
- 1 follower
- 11 replies
- 5.8k views
1.a) Does Hash still offer their $99.00 upgrade? 1.b) If so, is it computer restricted like the digital download version? 2.) Didn't the Hash website use to have a link to all the CD mascots covers? 3.) What happen to all the old videos that use to be in the gallery?
Last reply by Michael Brennan, -
- 1 reply
- 1.5k views
Hi Folks, I am trying to install Animation Master 19.0 on my MacBook Pro (15-inch, 2018) with a 2.2 GHz Intel Core i7, 16 GB 2400 MHz DDR4 RAM and an Intel UHD Graphics 630 1536 MB. I can download the software from the HASH Inc. Forum, but when I put in my KEY, I get the error message: Bad RLM_HANDLE error code (-1021) ERROR. ...and I cannot move further. Can anyone help me through this? Thanks, Jabbar Thomas jabbar_t@yahoo.com
Last reply by robcat2075, -
- 2 replies
- 4.5k views
Hello. Lately I've been having a decal rendering issue. They basically just run or smear upwards. Has anyone else had this issue?
Last reply by ChuckGram, -
- 6 replies
- 4.9k views
Sadly, I just read on Facebook that forum member Gene Thompson has passed away.
Last reply by pixelplucker, -
- 3 replies
- 4.6k views
I just added a new Geforce GTX 1050 ti card to my PC which is running on Windows 10. I tested a video game with it and the game now runs on maximum graphics quality without a hitch but I'm not getting any difference in Hash rendering performance. Is there a setting I'm missing in Hash?
Last reply by ChuckGram, -
- 1 follower
- 6 replies
- 5.1k views
Hi all, I've not used A:M for quite some time. I'm sure back then I could add a camera rotoscope and it would render as a backdrop to my scene. I've added the rotoscope, it's visible in camera view, but when I render it ain't there. I can't see any setting that's killing it. Can anyone point me in the right direction? Thanks
Last reply by Jem Shaw, -
- 0 replies
- 4.3k views
December 6 , 1931. The New York Times offers an only slightly smirking explanation of the cartoon process. Intro... Full article. Click to enlarge...
Last reply by robcat2075, -
Ok, so I posted about something like this before. It seems that I can't apply decals to ANY model. Whenever I try to, the program crashes. Contrast that with the fact that the models that already have decals applied still show up in real time. I've included an example. The one on the left has the decals, the one on the right doesn't. Both were created using the exact same version of the program, but at different times and on different machines. The decals on the left model are TGA files. I have no way of saving to that format anymore. Suggestions?
Last reply by robcat2075, -
- 1 follower
- 2 replies
- 4.4k views
Hello! It's been a while since I've been here but I've reinstalled Hash A:M v12.0d (witch and cat on CD). Is this the latest update for this CD version? When I tried to update to v12.0w, it says I need to insert the correct CD or something like that. Any help or info would be great. Thanks! Joe
Last reply by J. Baker, -
- 1 follower
- 1 reply
- 4.5k views
Hi all, while cleaning the attic I stumbled upon these gems. And a manual was actually that...a manual (661 pages!) Right now I'm on a quest to find videotape vol 1. I assume it's about modelling, probably the one I watched most, so hopefully it's not somewhere in a videoplayer at the dump. :-) Last time I used AM was in 2003 or so, but great to see it's still alive and kicking. I can only say it was my way into modelling and animation! Maybe I'll download the trial later today. Cheers and stay safe! Edwin
Last reply by robcat2075, -
- 2 replies
- 4.7k views
AMD stock went up 8% to a new high today on the announcement of new chips https://www.theverge.com/circuitbreaker/2020/7/21/21331824/amd-7nm-ryzen-4000-desktop-chips-apu-processor-prebuilt-systems-intel https://www.fool.com/investing/2020/07/22/amd-targets-oem-market-with-new-ryzen-chips.aspx Not available for DIYers yet but I presume their previous top-of-the-line desktop will be reduced in price soon. An 8-core chip that runs up to 4.3GHz yet only produces 35 watts of heat? I remember going to a show where someone was demonstrating a PC that ran at ... 200MHz! The fan sounded like a vacuum cleaner running and the exhaust felt like …
Last reply by Fuchur, -
- 1 reply
- 4.5k views
Free... if willing to build from source. Nominal fee for current builds to fund development (available via gumroad). General use: Drag/drop obj into viewport. Paint. https://armorpaint.org/index.html Online manual: https://armorpaint.org/manual.html On Windows the application is portable (no installation required) and approx. 10MB Also runs on Linux, Mac and iPad. Even if only used to create decals via proxy model the application might allow A:M users a pipeline to use PBR materials; generating the various texture maps/decals required...
Last reply by Michael Brennan, -
- 7 replies
- 5k views
Hey All, got a model with a couple of 4-point internal patches that are causing Cura to show it as non-manifold. How can I remove those patches? Thanks, Rich
Last reply by fae_alba, -
- 1 follower
- 0 replies
- 4.3k views
I remember back in the day Hash inc. sold t-shirts. Any chance they would ever again? I used to have the H*A*S*H beige one and one that said. "say no to polygons". that was always a good conversation starter when out in public.
Last reply by Michael Brennan, -
- 6 replies
- 4.9k views
Hey all, anybody got any info on Hash Support or Orders? Trying to re-up my sub, but not getting any response and just wanna make sure everything's alright. Rich
Last reply by Jason Simonds, -
- 9 replies
- 5.8k views
I'm sure everyone has seen the latest Unreal Engine demo?.. looks super impressive! Has anyone been able to export A:M animations to engines like this for rendering?
Last reply by Fuchur, -
- 4 replies
- 4.5k views
Live feed of SpaceX launch today (Sat May 30)... EDIT: this is now an archive of the broadcast. The launch begins at about 4:23:04
Last reply by Tom, -
- 0 replies
- 4.4k views
May 30 was Mel Blanc's 112th birthday. Hear the "Man of a Thousand Voices" do eight different characters in "Birds Anonymous" (1957)
Last reply by robcat2075, -
- 1 follower
- 1 reply
- 4.4k views
Hi! I renewed my annual A:M subscription yesterday... how long does it normally take to get the activation stuff? Thanks, Rusty
Last reply by robcat2075, -
- 1 follower
- 26 replies
- 7k views
Hi all, I need to model an item with just a photo, and one measurement of a side of the item. I thought I could set up an choreography with the camera matching the perspective of the photo, then model the item there. But after an hour trying to set the camera, still no go. Anyone have done this before, or has this been discussed before? Cheers, Rijk
Last reply by rijklau,
