Animation:Master
News and Information
Subforums
-
- 143
- posts
-
- African grey?
- By Fuchur,
917 topics in this forum
-
- 9 replies
- 945 views
Not sure if this is an ATI thing or something with the last couple of updates but when I move a ruler guide I get poor refresh and mouse trails. It clears as soon as I let go of the guide. Anyone else have this?
Last reply by pixelplucker, -
- 9 replies
- 1.8k views
Hello, In the windows of Decals, I have a way to detach CP of each other (Ctrl click). But I don't find a way to paste them again. Is it possible? It is also possible to exclude a patch of Decals (Remove decals...), but I don't find a way to import a patch in Decals. Is it possible? I ask this, because when I modify a textured model, I lose patches in Uvs. So I try to found a way to repair the UVs. Thank you in advance for the answers
Last reply by Malo, -
- 9 replies
- 1.2k views
I was rendering a shot with a glowing object and I noticed that Screen based AO causes a 'banding' in the glow/ halow/ orb is present at the end of the last render pass. I wonder if this has to do with a setting or just a casualty of using screen based AO.... The glow is looking great until that last pass finishes and the AO is added in. I'm in V18. I increased the multipasses but that didn't help. Both with and without motion blurr carries the same results.
Last reply by detbear, -
- 1 follower
- 9 replies
- 2.7k views
Have just updated to 18 n 64bit (installing on my Win10 went okay), but the bug that makes it impossible to select and move points and objects, make this version impossible to work with. Wanted to switch back to 18 m, but couldn't find it anywhere on the FTP. If I download via the link in the forum announcement of 18 m, I get 18 n. Help anybody?
Last reply by Jason Simonds, -
- 1 follower
- 9 replies
- 4k views
We are looking to clean up Animation Master Code. This will mean dropping Windows XP. Please answer the poll below so we can see if the work to keep windows XP is worth it.
Last reply by jakerupert, -
- 9 replies
- 1.4k views
Been a while since I started modeling in AM again and when I shift click to create a surface the splines don't create a patch. Tricky part is the piece I am modeling will be 3d printed and internal faces gives my printers software fits. This particular part is for piece of scroll work that was on an antique mirror. My plans are to model the missing piece, print it out, make a mold then make the replacement patch. I thought in the past I was able to do this but its been a while.
Last reply by robcat2075, -
Smart Flock
by serg2- 9 replies
- 2.1k views
Project MBF_18.prj
Last reply by serg2, -
- 9 replies
- 1.1k views
I've often made use of the ability to hide CP's in the object so they don't show in the cho when animating, hiding the rest of the body when checking two figures hand positions in a dance sequence for example. I wondered if there was a way to set that up using pose sliders so as to get a timelapse effect ? What I want to do is to hide parts of a house and have them revealed over time so as to get a time lapse effect. It would be possible to do it with iterated models, substituted as the the chor progressed (?) but I wondered if it was possible to hide the cps viapose sliders or another mechanism ? simon
Last reply by Simon Edmondson, -
- 9 replies
- 1.1k views
Hey Guys, At the Q&A with Roger and Robcat, I offered to let them have a grab at my simple custom eye set. This simple toon rig is from my dragon rig on Adventures With Boomer. The rig could be stuck to any character... Here ya go... 2016 Detbears Toon Eye.mdl
Last reply by largento, -
- 9 replies
- 2.6k views
Hello, at this time https://www.hash.com/reports uploading is broken. I'm working on a fix. Right now upload loads into the database and I think after all of these years that is starting to push the limits. I'm going to try to change it to 'disk' upload but I need to test if the breaks the old database uploads. I will be posting here when I get it fixed or I break it more.. Let's not hope the latter this time!!!1 Thank You, Jason Simonds
Last reply by robcat2075, -
- 9 replies
- 2.6k views
Hello friends, with some delay, here is the video for use with 3DCoat AM. very simple and mostly it works. With 3DCoat, I found a way to paint objects and have maps without having to worry about the UV problems. Any use perpixel. 3DCoat all tools can be used for AM. for convenience, I made a video that shows how to do it. I used this method for my wolf. The most is that the bump map to a report this time impeccable. https://youtu.be/SSlyU6cOkpk
Last reply by ludo_si, -
- 9 replies
- 1.6k views
Here's a quick test of a stop motion approach to animating that uses... no animation... just different (instances of) the same models. (Those instances can then of course be adjusted/animated) Click to play gif animation. StopMoStyle.prj
Last reply by Rodney, -
- 9 replies
- 1.7k views
We've had .ai (Adobe Illustrator) import for a long time. You can make an outline in a vector art program and A:M can import the .ai file and bevel/extrude it to make a 3D shape. That is great for making mechanical parts. However, inexpensive programs that can export a .AI file are still not common. V19 will add suport for SVG. SVG (ScalableVectorGraphics) is another vector format and is supported by free programs like InkScape. InkScape appears to be a full-featured vector graphics editor and should work well for A:M purposes.
Last reply by Fuchur, -
- 9 replies
- 1.1k views
Maybe it's getting time for a new Image Contest but... it will need a topic first! Got ideas? Something not too narrow, not too broad, something we haven't done a lot before? Something that A:M users would enjoy putting their own personal spin on? One idea I have in the back of my head... "Planes, Trains, Automobiles" What are your ideas?
Last reply by fae_alba, -
- 9 replies
- 1.4k views
I bought the current version last week and was going to migrate over to using V18, rather than my more usual V17. However its giving some trouble I have a project, set up in V17with all the files embedded ready to use and the map pathways clearly set out. When I try to import that into V18 it imports the models and the animationm some of the maps but, NOT all of them. The paths are retained in the file details but the image is left behind. When i try to reconfirm the file by following through the path and identifying the file, it doesn't accept the input. If I try to import the map to then reapply the map it does not import the map as requested. Can abyone k…
Last reply by Simon Edmondson, -
- 1 follower
- 9 replies
- 1.5k views
--
Last reply by robcat2075, -
- 1 follower
- 9 replies
- 1.4k views
Is there still interest in an animation boot camp? The goal would not be to teach you all there is to know about character animation but to get you using A:M right so that you may make sense and good use of the abundant character animation information that is available now. I'm thinking there might be four projects.... -Bouncing ball -Broad jump -Walk -Pose-to-pose acting exercise. We'd need to find some time we could all Skype together once a week.
Last reply by robcat2075, -
- 9 replies
- 1.2k views
I recently snagged v 19 and am and wanted to do a test using cloth. First I made a couple of primitives. Next I made s plane and applied a cloth material. When I drop them in the chor and animate the plane the cloth does't seem to simulate but rather the plane just moves from point a to point be as i set it. My goal ultimately after someone is kind enough to enlighten me on what I am missing in my prj is to simulate a sheet and ultimately export it out when conformed to various shapes as a quad obj that I can convert to nurbs and eventually be able to make parts that I can cast (ie die cast models). Reason for nurbs is so I can add a thickness to the new shape, t…
Last reply by robcat2075, -
- 9 replies
- 1.1k views
I'm wondering if there will be a new one. I'm constantly finding myself making or looking for new scenery, especially buildings. I for one, would be happy to contribute some models. Is there enough interest in the community?
Last reply by Rodney, -
- 9 replies
- 837 views
As mentioned elsewhere, have been having a lot of tech troubles recently, had thought they were behind me now and to get on with something new(ish) but have hit a problem with alpha channels in TGA files. First a bit of background. I'm working in V18 within OSX 10:8.5. on a Mac mini, I7, 2.3ghz with 4Gb of Ram. Just rendered two scenes to TGA with the figure set against an empty background ( ready for compositing later ). All was well until I opened them in Photoshop, to find that the background had rendered as black rather than transparent. When selecting the background and deleting it, the Alpha transparency is there but, ideally, don't wish to do tha…
Last reply by Simon Edmondson, -
- 9 replies
- 896 views
The subject of Desired Gamma came up and I was unable to get my software to cooperate at the time, so, I made an attempt at a video explanation of the little I know that I am posting here along with the Projects used and renders. One thing I still don't think I got across in the video is that if you are working with 2.2 gamma images, the gamma correction can get re-applied automatically with each iteration causing the image or portion of image (and colors) to lighten. Anyway, here is the video and Project files. Hopefully, it is helpful. Desired_gamma_testing.mp4 Desired_Gamma_testing.zip
Last reply by robcat2075, -
- 9 replies
- 847 views
Happy Holidays to all of you!
Last reply by robcat2075, -
- 9 replies
- 977 views
Hello. I have mainly moved over to trying to use drawn and stop frame processes for projects. However, wanted to use volumetrics for a particular shot and returned to the fold for that. Unfortunately I'm having a lot of bother getting a consistent result. The shot was set up and tested using quick renders to check progress. All seemed well until I tried to render it out as a QT file. This is a screenshot of what was supposed to happen and this is the QT file. Clearly very different. When rendered as a single frame jpg it refuses to save the file, as apng it does not parse the file into readable form, this is a tga converted in PS. …
Last reply by robcat2075, -
- 9 replies
- 984 views
At the last Live Answer Time I had trouble getting a satisfactory bouncy ball with Bullet soft body dynamics Here is a more successful attempt with a quadish-topology ball with more patches and the patches of uniform size. From left to right the balls have "stiffness" of 0.01, 0.1 and 1 All4Ball005b weight comparison.prj StiffCompareB000.mp4
Last reply by Tom, -
- 1 follower
- 9 replies
- 2.7k views
Hello- I know that the particles listed as "Blobbies, Hair, Sprites,and Fluids" all have a "Cast Shadows" selection in their properties menu. I believe "Streaks" are able to cast shadows IF certain things are done. I believe it must be a Klieg light with ray traced shadows. There are also other steps one can take but the correct order escapes me at the moment. Does anyone know how to make Streaks "Cast Shadows"? Thanks! Tom
Last reply by Tom, -
- 1 follower
- 9 replies
- 1.1k views
Hey, bug hunters! Unzip this zip, try this procedure out, and tell us what happens along with some info about your graphics card. Cottage097b.zip Thanks! A video should appear immediately following this sentence: clip4998DecalJump750.mp
Last reply by robcat2075, -
"Wrong Host for License"
by Guest KillerBeanFan112- 9 replies
- 805 views
IT ALWAYS KEEPS ON SAYING THIS!!!!!!!!!!!!!!!!!!!!! WHAT SHOULD I DO??????????????????????????????????????????????????? PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IT SAYS wrong host for license wHaT dO i HaVe To Do??????????????
Last reply by Jason Simonds, -
- 9 replies
- 481 views
[Edit: This side discussion has been split off from topic AMC Gremlin] Investigating further... Here is a comparison of displacement effects: First with a Gradient Material set to transition from RGB 128 to RGB 129 and Displacement set to 100000% Second is that gradient rendered to a TGA and used as a Displacement map Third is that gradient rendered to an OpenEXR and used as a Displacement map The Material is able to calculate an exact value for every pixel between the 128 and the 129 levels, creating a perfectly smooth slope. The TGA map, as expected, has one stair step from 128 to 129 The EXR has 8 steps. EXR uses a…
Last reply by robcat2075, -
- 8 replies
- 1k views
Within a new pose, can you use distortion mode to move and key cp's...... I get odd results in v16. William
Last reply by robcat2075, -
- 8 replies
- 968 views
I'm imported a OBJ as prop... the AO seems not work with it .. can anyone confirm it?
Last reply by Jason Simonds, -
- 8 replies
- 674 views
lighting.mov right click then
Last reply by johnl3d, -
- 8 replies
- 1.7k views
Hi, just wanted to show something cool in the next release of A:M. The plugin Amplitude will be able to use a WAV-file and control any kind of animation-channel (like a pose, a bones rotation, translation, etc.) with the amplitude of the soundfile. Two very small example can be seen attached. The first one is created from several single-tracks (so that the instruments are playing solo in the tracks and control each one "instrument"). The second one is a part of a nightcore-song which will control the height of a model (better to say a pose which controls the height of a model). Then I used the plugin Multiple-Copies to create 10 of those and attached the act…
Last reply by thefreshestever, -
- 1 follower
- 8 replies
- 3.3k views
http://store.makerbot.com/replicator2.html Check out this new 3d printer--$2000 :yay:
Last reply by pixelplucker, -
- 8 replies
- 728 views
I don't know if this is new or not, but I just found out that bitmap plus materials work with imported props! AND so does the matcap shader. I did not try other shaders - but I'm guessing they work as well.
Last reply by pixelplucker, -
- 8 replies
- 791 views
Just curious I have v 17 on my 32 bit system and thinking about getting he v 17 64 bit for my laptop would the 64 bit be faster then the 32 bit are they run about the same ?
Last reply by Kamikaze, -
- 8 replies
- 744 views
I have this model and when I render with SSS on, the rubber grip loses the bump map and the pen in front turns black. With SSS off is how it should look. Not sure what I am doing wrong. Anyone? Message_Pens.zip
Last reply by pixelplucker, -
- 8 replies
- 610 views
Hi, How do you get the AM help files to work with the help menu in AM? I've downloaded them placed them (zipped and unzipped) in the AM folder...what am I doing wrong? Thanks, Rusty
Last reply by rusty, -
- 8 replies
- 741 views
everytime i close and reopen a:m the "draw particles / hair" option is set to on, regardless if i´ve set it to off the session before. in my current project i always forget that when i´m opening the project, and when i want to scrub through the timeline, a:m starts calculating the particles (i´ve a sprite system set up), which can take up to 10 minutes or so, depending on the number of frames it has to calculate. the active-status the model which emits the particles is set to off, so i wonder why a:m is calculating the particles anyway... any advice?
Last reply by Simon Edmondson, -
- 8 replies
- 603 views
Theres an option in the install folder called "Multiple Master" which MarkW mentioned a few weeks back. Are there any instructions on how to use it and set it up ? I'm rendering a sequence and would like to prepare the next one while its going through. simon V17g OSX
Last reply by robcat2075, -
- 8 replies
- 1.2k views
Over in the 'Buying a Cafe' topic Steve was kind enough to share his settings for Sub Surface Scattering. I know there are several topics on settings but this is something I've longed to understand versus just occasionally reference. His settings were: SSS with diffuse color of 253, 227, 185 SSS half distances 3,2,1 SSS extend group to avoid SSS borders General if not naive assumption: The SSS diffuse color settings operate as R,B,G settings in that the first number represents how much Red, the second how much Blue and the third how much Green. True/False? No where close to reality? If true then I would assume Steve's settings have a majorit…
Last reply by Rodney, -
- 1 follower
- 8 replies
- 943 views
Hi, Please watch the video (link below) and tell me what I'm doing wrong. I need a model of a sphere rotated forward 90 degrees. At the end of the video you'll see the splines warp??? BTW at the end I hit the space bar several times refreshing so it isn't a refresh error. This the latest version 17. Thanks, Rusty
Last reply by rusty, -
- 8 replies
- 964 views
Does anyone know where A:M stores the Custom Colors from a Model's Surface Properties? Thanks!
Last reply by robcat2075, -
- 1 follower
- 8 replies
- 907 views
Sorry posting this reply here as I'm unable to make a post in the v18d thread So thanks for the sample model Robert. Closer inspection shows that v18d is NOT randomly flipping normals, but it IS making things see-through?! In the screenshot here of your test model you can clearly see that the yellow pointers are all still facing outward as they should. Note, this screenshot was taken with 'Show back facing ploys' ON, so even if there were any flipped normals the model still should have looked solid. Incidentally whilst trying to get that screenshot A:M crash yet again. v17g is starting to look to me like the most stable Mac version.
Last reply by markw, -
- 8 replies
- 1k views
Hi. I just upgraded to version 18 and I am trying to import a video to use as a rotoscope for compositing. It appears that version 18 no longer supports .mov files. Is that the case? When I try a .avi file I get an error message that the file is corrupted or not a type supported. The same files work perfectly in version 15 (which I know is a big gap as far as versions go.) Any suggestions? Thanks in advance for your help.
Last reply by robcat2075, -
- 8 replies
- 2.8k views
Hi, I've been rigging a hand and noticed that when i rotate the "control index 2 right" bone past -180 degress it goes out of whack. Can some one explain what I'm doing wrong here's the hand model I was using handtest.mdl
Last reply by robcat2075, -
- 8 replies
- 620 views
Have been working on a model of a young boy for the next project. Learnt some lessons last time so was cautious this time around, saved regularly in different iterations as progress was made. Installed the 2008 rig up to the point were it said, " set up cp weights and smartskin", so have spent the past few days trying to get that ready for next phase of the rig installation. Had been working on half a model then intended to copy flip attach before going on to finish the rig installation. However, every time I try to CFA it crashes out the program. Sometimes when I reopen it then crashes when I just try to copy before pasting. I have tried it in V15 and V18 w…
Last reply by Simon Edmondson, -
- 8 replies
- 1.5k views
Files are located in the 'Hair Salon' thread, located here: http://www.hash.com/forums/index.php?showt...mp;#entry397248 A:M's hair material in a LONG HAIR scenario, useful for a 'Duck Dynasty' beard, 'weeping-willow' style tree leaves, 'hippie-hair' or glamorous female long hair. The feature being demonstrated here is not so much the hair material as the way it interacts and wraps around other objects, known as collision-detection. Many programs boast impressive hair and styling features, but have very little to show how the hair reacts dynamically in an animation scenario... AND- what happens when the dynamic hair comes into contact with other objects... usual…
Last reply by John Bigboote, -
- 8 replies
- 943 views
I got a one year subscription to 18 F last friday and have been using it over the weekend. I wondered if anyone else is have a few glitches with it ? The first one I noticed was that it crashed out if the maximum resolution was used for the maps in a z buffer render ? It came with a message saying Memory allocation failute 11 ( I think ) If a lower z buffer was chosen it was OK. but the maximum crashed each time it was tried. The second glitch came when trying to "save animation as" after rendering a sequence. The dialogue box would appear but non of the buttons woulld respond when clicked on. Tried exiting the program, restarting, importing sequence…
Last reply by Simon Edmondson, -
- 1 follower
- 8 replies
- 2.1k views
Greeting again, Wondering your collective thoughts on.... I have 4 characters carrying a 5th character (constrained) on their shoulders. What's he best way to have these folks walk through town? i.e - set up path for each character to follow? - animate the environment and leave the characters stationary? - establish 1 character as a lead and constrain the others to follow? - something else? any advice appreciated. Thanks
Last reply by Rodney, -
- 8 replies
- 1.5k views
I've been thinking about fake SSS. I've been thinking it might be useful to be able to have a map of the thickness of the model. This might be part of a backlit SSS look. We can get something that appears to be a thickness map with surface "transparency" and "density" settings...
Last reply by robcat2075,
