Work In Progress / Sweatbox
Subforums
-
Showcase (57,245 visits to this link)
-
- 530
- posts
-
A:M Stills (86,577 visits to this link)
-
Works In Progress (WIP) (59,142 visits to this link)
-
- 3.1k
- posts
5,153 topics in this forum
-
- 6 replies
- 387 views
I started out with a single spline with several CP's connected to form a rudder shape. After selecting that closed loop, I extruded twice. Once done with extrusion, I wanted to stitch the sides together to create the side faces. On my first stitch, I noticed the distortion you see in the jpeg. Normally I see that with overlapping splines, but how can that be on such a simple shape? Two extrusions is all. Also, when I select a CP and pull it away, there is no other one hiding behind it - if that makes any sense. Any ideas?
Last reply by Eric2575, -
- 12 replies
- 725 views
ok i used a pose slider at zero the bullet is in the gun not visible. at 100 its way out there i ussually only set it at about 20 somthing to get the bullet shot where i need it. but anyways if i move the gun while the bullet is shooting the bullet moves along with it. how do i fix this? dang this is only 91kb Pose_slider_bullet.mov
Last reply by Vash, -
- 2 replies
- 358 views
Was trying to use cloth in another way with the help of hulk this is as usual a little rough but you'll get the idea anyway This is going to be a great version to play with test2.mov
Last reply by johnl3d, -
- 3 replies
- 715 views
Ok I finally put the finishing touches on this model, I just kind of forgot about it for a while but now it is finished. Here is the wip topic for it: http://www.hash.com/forums/index.php?showtopic=12262
Last reply by Fuchur, -
- 1 reply
- 376 views
Since Sunday I have killed my old film and have started a new with AM. Here is my set in progress. Film deadlines are April 26th..
Last reply by starwarsguy, -
- 4 replies
- 620 views
Hey guys, was going through some of my old project files and found one of my older poses with one of my characters. Figured I'd give it a run with the newer renderer and some new toon settings. If you get a min. check it out http://www.vrcops.com/McImage/McPose.jpg Thanks Mike Fitz www.3dartz.com
Last reply by 3DArtZ, -
- 10 replies
- 681 views
will explain later regular material no particles evileye.mov
Last reply by vf124, -
- 1 follower
- 15 replies
- 1.1k views
I've been toying with v11's hair and collision-detection and came-up with a test scenario you may find helpful should you wish to experiment with this feature. In my opinion, it works, but could do with some improvement. Here's a movie...project will follow in subsequent post: CollDetect_test.mov
Last reply by msfolly, -
- 1 follower
- 2 replies
- 399 views
A thread in New Users got me started on this. As usual, a lot harder than I thought. Let me know what you think. The quest was for a semi-realistic tire. I think it is semi-realistic. It will bear up at the distance I think you would normally view a tire from. The perspectives from pictures, combined with how to flatten a half torus without having to then a paint banana shaped, regular pattern drove me nuts. Also, the subdivisions need to be regular, you can see what I did in the action within the project. Whatever. If I hadn't had the wonderful tutorial from William Sutton at Zandoria, I would not even had know what to try. What a great tutorial. If you w…
Last reply by pixelmech, -
- 40 replies
- 2.4k views
I want to model Edward elrich (anyone know who that is?) 's head but I need to good shots : the side and front of the head. Also how would I create locks of hair like braids. Here for people who don't know. His profile is under characters, elric family, then edward. For those who don't know you probably won't be able to find a good pic.
Last reply by Vash, -
- 5 replies
- 472 views
Its' a pretty straightforward 5 point patch. Why is the decal distorting on it? There are actually two 5 point patches on the jpeg next to each other- both distorting!
Last reply by JoshB, -
- 16 replies
- 1k views
Here is the next installment of the A:M repository on the Turbo Squid site. It can be found at: http://www.turbosquid.com/FullPreview/Inde...ion/FullPreview Purchase it if you wish or just enjoy The nice render, if it strikes your fancy.
Last reply by NickHutson, -
- 2 replies
- 328 views
Sorry missed fedex today so no 12cd instead i started fooling around 11.1d+ gunblob.mov
Last reply by Vash, -
Hi all. Just something I've been working on. More to be done with this character and so on. Stay tune.
Last reply by AngryOne, -
- 8 replies
- 703 views
Just thought I'd show... I put a new clip up on my site... McDonalds restaurants wanted to previsualize what it would look like if they took a display from a flat 2D photo to a mocked 3D vacuum-form. 2 days later I had this model, fully extruded from the hero pose photo, and all one mesh. http://campbellanimation.com Comments welcome.
Last reply by heyvern, -
- 4 replies
- 475 views
Here's an evironment I've been working on... 40 hours to render. Any suggestions comments, criticisms appreciated. ~Danno
Last reply by DornerDan, -
- 9 replies
- 579 views
just mindlessly messing around with a couple hair systems. Painted a bush sprite and a grass sprite real quick, just to get them in there and get a feel for what might be possible down the line. Obviously you'd want a lot more variety in the images if you were doing something more serious.
Last reply by John Keates, -
- 17 replies
- 953 views
Here's a character I've been building very slowly while learning to model in hash. He isn't done yet due to other projects and having to earn a crust. Anyway way let me know what you think
Last reply by Gorf, -
- 2 replies
- 237 views
Hi, I am a High School student. I am having a problem with my action in the Choreography window. Everything is fine in the Action window, he will along the path. My character is our schools mascot. I am just trying to make “Rebel Man” walk along a simple path. The problem is he follows the path in the Choreography but his feet do not move. I already tried removing the action from the Choreography and dropping it back in. I also already checked my Crop Range and the Chor Range. I would greatly appreciate any help. Thank you for your time, Sav_edge56 Rebel4WIP.prj
Last reply by 927822, -
- 6 replies
- 361 views
I hate it when someone asks a question I haven't played with ...so someone..asked about a blinking light material....and that got me thinking and I came up with this. It could be better with a few tweaks of the expression to maybe slow it down but I wanted to work more on a modeling tut so here's the "raw" idea lightsblinking.mov
Last reply by vf124, -
- 6 replies
- 604 views
Hello everyone, This is a currently environment study. The idea was to create a fairly simple image with simple shapes and textures, and then to attempt to light it as realisticly as possible. I know I've still got a lot left to do, but I would love to hear any comments/suggestions. ~Danno
Last reply by JoshB, -
- 8 replies
- 298 views
I am having trouble with the sound quality after I render my project. Anyone have any suggestions? Should I use multipass?
Last reply by camzilla, -
- 9 replies
- 622 views
Here's a real simple fireworks display using sprite material right off the cd fireworks.mov
Last reply by johnl3d, -
- 1 follower
- 1 reply
- 519 views
Hey Guys..I'm doing a whole bunch of stuff right now I decided to try modeling the GI Joe Submarine Plane vehicle..I plan model the little details seperatley..also, the reason why the vehicle is peaked is because it's easier to model that way..this isn't much: EDIT: Here's a link to the pic linky
Last reply by jamagica, -
- 9 replies
- 1.1k views
here's a little animation I put up on AWfilms for kicks. It's the first project I've done with AW. I'm a 3D guy for some years now, but mainly polys. I'm really starting to like working with the splines. I know this isn't all that great, but I wanted to jump in and get my feet wet. Thought I'd see what advice or critique I could get from you guys. Thanks, CrawdaddyMovie
Last reply by Mike Hart, -
Tried to make some photorealism... Well just newbie photorealism Thanks to Mr Talbot for the model and the education Sure there are better students But perhaps this is the future a virtual Michael J in everyones living room Sure you have to use your VISA-card first but then he steps in to your own Holoverse http://www.holoverse.com/ Or shall we make some Iconoclasm? http://en.wikipedia.org/wiki/Iconoclasm Stop rendering the living and the dead? The question is for sure not so easy to answer. But think about it - feel about it? Comments welcome!
Last reply by Mr MM, -
- 1 follower
- 4 replies
- 431 views
I forgot I had this arm thingy, so I'm continuing on it:
Last reply by Mr. Jaqe, -
Hey, just did this for my dad. He's a graphic designer and needed a render of a label he made in one of his client's products.
Last reply by Rodney, -
I wish Charles Babbage would update his underwater caustics for V.11.0 The animation would go great with this model. Comments and critique are welcome
Last reply by Eric2575, -
- 31 replies
- 2.9k views
Ok I finally finished my character here he is! I was wondering if anyone new of good surface settings for the eyballs and also the body of this guy to make him look even better.
Last reply by MarkusAralius382, -
- 4 replies
- 373 views
I used a few materials and change them all with one pose slider just as a test this should point you in the right direction. I'd use a pose with decal switching too johnl3d would have posted sooner but 11.1d doesn't seem to like qt would not save it on my machine eyechange000.mov
Last reply by johnl3d, -
- 3 replies
- 350 views
Well you won't see the space marines till the Image contest but here is his primary weapon - the Boltgun (modified - somewhere between Blur's version and the actual models version) No decals yet - it's all geometry with working magazine and projectiles (ie the projectile and casings are separate geometry) and the casings fly out the ejection port (once I build the appropriate actions) Any comments, ideas for improvement most welcome. Patch count for the gun is 6,380. My marines are 12,000 each - so far (and the gun is a separate model) Wireframe view: Cheers
Last reply by higginsdj, -
- 8 replies
- 926 views
Here is the link to the film I made for my grad shool application for MFA animation programs. I found out that I got into CalArts, still waiting on UCLA and USC. http://www.michaelrobinson.com/returntoearth/ I've been hoping I'd be able to make this post for two months. I didn't want to post until the results were in, and good!! Some of you may have seen this thread This is a pretty rough animation. I put myself through a 6 week AM bootcamp (with all sorts of great help from the forums). The Caveats are on the link - and man, there are a lot! Since I won't start school for several months, I'd like to make a full fledged version of the movie t…
Last reply by reason808, -
Fat bunny model 1 2
by Vash- 64 replies
- 3.3k views
Probably go half%#$ with this thing and won't finish it, but I'll give a start anyway. Well, my first model was extremely primitive, with no parts attatched and my own everything-is-in-a-hierarchy rig. But I'll give this a try and I want to know how I should sort these pics for rotoscopes: gif.bmp
Last reply by Vash, -
- 2 replies
- 486 views
Hi hashers ... I was just playing whit A:M .. it took me 10 minutes .. and i liked his results you can check it in : http://xtaz.com.br/anima/aros.zip ( use loop oiption ) ( 590 Kb / MOV ON 2 )
Last reply by Eos, -
- 58 replies
- 5.1k views
Hi all, I felt guilty for not posting anything new in a while, so here's my newest character render. I'm trying out some photo texturing to add more believabilty. The jeans texture is pretty lo res right now, I used a digital camera. I'll probably use my scanner to scan sections of some jeans for a more detailed decal. I need to rework the feet a bit, too. Shoes would be easier to model, I think. I'm thinking she could wear a jacket that uses the v12 clothsim. Jim
Last reply by Nycer, -
- 5 replies
- 601 views
Greetings all! I've had A:M for a few years now, but I've never really had the opportunity to get into it as much as I'd like and never made much progress. So I figured I'd best start back at the beginning with the tutorials. I just finished Tutorial 4 and would like to hear some critiques. Please bear in mind that this is the first thing I've ever animated. Previously, I've just played around with modeling a little bit, and not very well at that. All the manipulations were done primarily by adjusting the CP's and a few timing adjustments were made by stretching/compressing or moving splines around in the timeline window. I'm assuming it gets a lot easier when …
Last reply by KenH, -
- 1 reply
- 324 views
her name is mystery just.................well thats a mystery anyways im just gonna show an animation instead of a still for now cause i have to go to bed. Mystery_says_hello.mov
Last reply by Vash, -
- 1 follower
- 27 replies
- 1.9k views
Ok, I don't know how I got started on this late at night, but we were reading Go, Dog, Go! It's always been one of my favorite books when I was a kid and I loved their cars. I thought it might be easy to model so here is what I came up with. First time playing with materials too. I'll want to play around with it some more later, make some rubber for the tires, seats in, steering wheel and grille, few other things. C&C welcome
Last reply by gschumsky, -
- 9 replies
- 1k views
Hey all, Just a little offering that I made over the weekend. Comments are welcome. Enjoy! -Nathan Glemboski
Last reply by nglemb, -
- 6 replies
- 421 views
This one is hard to explain...but imagine that each of the pillars are of different material and density and a huge force comes in from the left side of the screen and the pillars react based on their weight etc. Well I gave each pillar different settings with the rigid body constraint (enforcement) and (bounce ) mainly then increased the dynamic force (gravity) of the chor over time in the x and a little in the z direction this is the results. I know weird but it has a purpose need spell check for topic line...hey its late b2.mov
Last reply by johnl3d, -
- 27 replies
- 1.3k views
Last reply by Vash, -
- 10 replies
- 714 views
I´ve been working on this model on and off for about 3 wks and here´s what i´ve got so far. I just wanted to know if anyone had any crits efore moving on to rigging. Thanks for all and any comments. Here´s the front
Last reply by higginsdj, -
- 5 replies
- 455 views
Well, here is the latest incarnation of the continual WIP, I call 'the teaser image for my animation project'. I also have a probelm with a decal that I cannot seem to fix. Thought someone might be able to provide some suggestions. Link to small version of image with enlargement of problem. Link to full size version of image.
Last reply by NancyGormezano, -
- 21 replies
- 1.4k views
I'm still working on my harrier model [ http://www.hash.com/forums/index.php?act=A...e=post&id=63179 ] I wondering what would be a good way to make exhaust for the nozzles. I'm playing with the streak emitters but it's not cooperating to much. any one have any views i can try ? Thanks
Last reply by Dhar, -
- 1 follower
- 4 replies
- 357 views
Alright..here it is so far..not much, but I've never gotten this far this well
Last reply by jamagica, -
- 1 reply
- 318 views
Just checking to see what I could do with Render as lines and a bit of glow. Cheers, E lr_001.mov
Last reply by johnl3d, -
- 6 replies
- 430 views
it took me like an hour to make...... i i dont know what to use for textures though. the pictures are distorted though. there width is shorter in the picture than its supossed to be.
Last reply by Newbert_Zero, -
- 9 replies
- 436 views
Here are the pics of my work that Flog requested.
Last reply by NickHutson, -
- 8 replies
- 507 views
Something trivial I'm sure, but how do you make a bulb or any other self-illuminated object give off a nice glow? The pic has the KeyLight on set to 21% with the FillLight turned off. One new light (set to "bulb") is placed in the center of the bulb model with volumetrics On and intensity turned to 100%. The glow shows nicely on the floor, but the 80% transparent "bulb" model isn't illuminated at all. Am I missing something (obviously), or is it not possible to make a light source shine from the center of an transparent object/model and illuminate the object as well as the surroundings? Please help me shine some light on the subject Gotta get out m…
Last reply by Fuchur,