Work In Progress / Sweatbox
Subforums
-
Showcase (57,265 visits to this link)
-
- 530
- posts
-
A:M Stills (86,601 visits to this link)
-
Works In Progress (WIP) (59,167 visits to this link)
-
- 3.1k
- posts
5,153 topics in this forum
-
- 2 replies
- 432 views
I was thinking about doing a scene on a mexican beach and started witha colorful but well worn row boat, next I would like to do a fishing net to drape over part of it but not quite sure how I am going to do it, also any ideas for details I may have missed.
Last reply by Dearmad, -
- 10 replies
- 847 views
Hello, Here is a character I am working on, he is almost done. Any comments, criticisms, or suggestions would be helpful. If parts of his body look familiar it is because his body is a rework of kee kat. I hope you like him. Also check out my recently updated website and let me know what you think: www.3dfrog.com Thanks
Last reply by robcat2075, -
- 9 replies
- 822 views
Well I thought I would post a few screen renders of the squid I made for the TSM contest (I had the modelling complete but did not enter because I hadn't textured it.) Here are some pics of the untextured model.
Last reply by sonofpat, -
- 1 reply
- 367 views
There's some unbelievable work happening at the Animation Showdown... not by me though; I'm coming in last every week! My entries for July: Chop (the only entry that didn't do an overhead chop) Pinch (burned up way too much time on the clam) Shiver (in retrospect, combining the knee knocking with the vertical torso motion probably wasn't realistic) You can see them on my Showdown Page.
Last reply by dborruso, -
- 13 replies
- 997 views
Hi Guys! I have a little animation and I'm breaking the lip sync, because I couldn't position the lip sync pose correct. I interest it, how can you break down your track(words)? What poses do you use to it and where? Because the lip sync was be pop out for me! Can you help me, it's very important me! Thanks before! Sharky
Last reply by Sharky, -
Superball!
by KenH- 1 reply
- 408 views
I was just fooling round with the ballman model and came up with this 500kb
Last reply by jfirestine, -
I have decided to start work on my first car, i havent made one before so im not sure how this is going to go. I'm using some Subaru Impreza blueprints from the Onno van Braam website. I wont be making a subaru, im just using the blueprints to get the basic shape of the car. Wish me luck Here's my progress so far, its not much but its a start
Last reply by -TC-, -
- 21 replies
- 1.9k views
Well, heres the begining of my project... Now the madness starts
Last reply by ChrisThom, -
Just saw this and had to say... Wow! Momentum Studios - X3 Upside Down Music Video Now that is some serious A:M integration with live action and the credits say this is old stuff... 2001 A:M Version 8.5!!!
Last reply by Rodney, -
- 0 replies
- 303 views
I combined a retry of a feather experiment with a retry at wispy cigarette smoke from another thread. I'm still getting a little jitter of feather images but 11L seems much better than previous versions. The voice is Jason Alexander as Duckman Duckman
Last reply by Bruce Del Porte, -
- 11 replies
- 1.1k views
heres an anim I did on a character Im working on. my goal was to model a character, rig and animate it in one day.. and i managed to do that.. although getting the anim to this stage took some more time cuz other things came in between.. anyway its a big WIP but if u have any comments they are more than welcome.. http://www.embrya.se/AM/nose.avi (divx 5.1) salu' /a.
Last reply by robcat2075, -
Hi Hashers : I cheered up with this contest, and I decided to put the hand in the mouse and model my centaur version After some sketches, here is the result : Centaur by Xtaz Peace Xtaz
Last reply by williamgaylord, -
- 18 replies
- 1.3k views
Hey guys. I've been working on that experimental head I did a while back and I'm up to a minute of animation. It's really just a test but it's a little short in itself. I hope you like it. I would value any crits on it as I want to put this on my portfolio, so don't hold back. PS I'll be putting in a puff of dust to make him sneeze when I get my video editor.
Last reply by CreativeAustinYankee, -
- 4 replies
- 571 views
I've just finished creating the phoneme's for my character and just had to try and figure out how this stuff works, so i Watched the "can you say that" video tut and attempted to make my own, a couple hours later out came this: Clip (890Kb Divx 5.03) Any feedback would be more than welcome I must say how impressed I am with A:M's implementation of the dopesheet etc etc..it was as easy as it appears in the video. However I did wind up with a bunch of keyframes that fall inbetween frames, is that normal? Laters
Last reply by Drakkheim, -
Here is my newest start, It is 2 nights of work so far and I hope to get a full day on it tomorrow. Hope you like, I will be making the model avail when finished but there is more to go of course.
Last reply by Spaceman, -
- 1 reply
- 543 views
Hi all, Thought I'd share my first public animation with a purpose! This is a short opener for a conference I'm helping with next week. LegoDude walks across the campus and enters the arts building (20 seconds; top frame is towards the end of that), then he enters the auditorium and walks down the aisle (a walk cycle down auditorium steps was fun!), climbs up onto the stage, then waves each arm to open each side of curtains (second image). After the curtains are open and the opening slide is onscreen behind him, LegoDude takes a bow (three different cameras capture this moment) -- last image. Thanks for the help of all those who worked with me on the walk cyc…
Last reply by vf124, -
- 1 reply
- 511 views
I made this for fun and all are welcome to use
Last reply by Spaceman, -
- 42 replies
- 2.1k views
I just posted this at cg talk and figure I would post here too... So after years of staring at the cereal box, I figured I'd try and put together a model of Tony the Tiger. This is a movie clip of his head. Everythig is geometry, except his mouth, which is a texture map for the moment. I want to see if I can model his mouth in there while staying true to the illustrated version... Anyhows, if you get a minute check it out.... for you sticklers on detail... I know I'm missing the nostrils at the moment! I plan on modelling the whole body too, but I want to figure out the mouth before.... http://www.3dartz.com/WIPs/TTA.mov Mike Fitz www.3dartz.com
Last reply by mtpeak2, -
Hey Guys... Just finished this little piece... let me know what u think it's not brilliant or anything, but actually turned out better than i thought. Was maybe thinking of submitting it into the image contest, but am not sure how to do that?... Is there anything i need to do first before i can submit it? if not... Who/WHere do i send it?.... Thanks Damian
Last reply by damianjh, -
- 0 replies
- 303 views
I'm working on a project and on a particular bone, I get two sets of lines(RGB) and when I copy and past them, they get confused and cris cross. Anyone know how to fix this?
Last reply by KenH, -
- 12 replies
- 944 views
This is the opening shot for my Mad Edd short. Mad Edd Animation AVI 3.5mb
Last reply by Dalemation, -
- 7 replies
- 500 views
this is a character wip for a fight scene that im working on he will have clothing like sub zero and scorpion off of mortal kombat. subzero_front.psp
Last reply by zoen, -
- 25 replies
- 1.9k views
I just modeled one of those lightning balls, I had one in my room and I thought it would be a cool prop. Here what it is if you dont know what I'm talking about... http://storeforknowledge.com/itemdetails.cfm/ID/616 (Lightning Ball) The one I modeled is at the bottom, anyways I have all of the materials and everything on it except for the 'electricity'. What would be the best way to make it? I have been playing around with different stuff and I just want another opinion. Thanks in advance, and hope you like it so far !!
Last reply by mtpeak2, -
- 6 replies
- 653 views
I'm still just a few inches off the ground, at the foot of the A:M learning curve. After some messing around with tutorials, I decided to have a shot at making a figure of my own. I think this Work In Progress is probably just progressing towards the trashcan - it has too many splines in some places and not enough in others, endless 3 and 5-point patches, some dead-end splines and lots of other bad stuff ('cos I don't yet know how to do it better). But I thought that making a figure of my own (complete with errors that will make it difficult or impossible to rig and animate) might be the quickest way to learn WHY models have to be built in a particular way. Bu…
Last reply by CRToonMike, -
- 10 replies
- 825 views
Here is a screen shot of the scene I am composing, options whether to use still image, hair or sprite emitter to create more trees at the back ground were suggested at the AM main thread. I will post the final when ready. Thanks for the suggestions!
Last reply by filipmun, -
- 3 replies
- 384 views
Here is a screen grab of the settings I used And render of the results. Upped the density and added ambiance color and intensity.
Last reply by Ganthofer, -
Mac & Mallow
by xor- 8 replies
- 1k views
I've finished my latest project ('bout time I say). The 160 x 120 version is at AM:Films. http://amfilms.hash.com/search/entry.php?entry=850 For those with more bandwidth, there's a 320 x 240 video at this address: http://gutterbrothersllc.com/video/ I welcome all feedback, however I am finished with this project and will move on. So if you don't see your comments being used to fix the video, it's not that I didn't listen. In fact, I'll likely use everyones suggestions for future videos. Laters . . .
Last reply by xor, -
- 12 replies
- 905 views
Here's the latest guy I've been modeling off and on for the past month or so... I'm planning to have him fight another ninja (a duplicate- just orange or blue or something) in a big room. Any suggestions? I'm still not completely decided on the music, or how it's all going to work out, but I want to have all the animation done by the end of August. But if anyone has any ideas for anything at all, they'd be much appreciated. thanks in advance! -Andrew
Last reply by pvillotti, -
- 6 replies
- 538 views
I decided to create a new logo in A:M.
Last reply by george, -
Centaur
by Guest mrsl13- 3 replies
- 462 views
Ok here is a Centaur I have Frankensteined (SP?)together..the top half should look familiar ,it's Jim Talbots "Tarzan" model off the Hash CD (I think)...and the bottom half is a basic Horse model Ive been working on..I also used this horse model to model a Pegasus, Unicorn and a Centaursus (cross breed..LOL) and of course its used as simple horse model too. No I am Not intering it into the TSM2 contest (can't claim its mine) ,just wanted to show it Mike
-
- 2 replies
- 856 views
post your comments please! -Mike
Last reply by dborruso, -
Hi all. here's a jacket i'm doing for a character. known issues are things like the general shape needs a bit of tweaking and such. My specific question regards decals. I'm really looking for a more interactive method of positioning a decal. What I mean is that I want a way to apply a decal, then move the cp's around UNDER the application, till the texture is in the right place. This should take place in an Action. Right now the process works like this- apply stamp look at model delete stamp move cp apply stamp rinse repeat. what i'm hoping for is more interactive than that. Any ideas?
Last reply by clamps, -
haven't posted anything in a while. Downloaded the ballman model and played with it last night for a while and then added gunshot sound effects today. May work on it a little as im not sure if the ending reads too well, also add some motion blur http://www.5000hp.com/animations/ballman.avi
Last reply by MATrickz, -
- 16 replies
- 1.4k views
Could you tell me why my animation was so badly classified with the last contest ? Mad_VideoGames from Jimbo Farrar... Without return difficult to progress thank you in advance
Last reply by littleandy, -
- 3 replies
- 503 views
Here is something that I did recently. Let me know what you think.
Last reply by littleandy, -
- 11 replies
- 975 views
Hello, all! I just bought A:M about three weeks ago, after reading a press release that an OS X version had been released. I'm not a 3D artist, but I am a graphic designer and A:M seemed like an affordable way to experiment and play with 3D. Anyway, as I started playing, I decided I'd focus on trying to figure out how to model some of the comic characters I'd worked on in the past and decided I'd start with a parody of Star Trek I'd started as a web comic back in 1996 and then did as a PDF comic in 2000. The character designs I'd used were pretty simple and there was a focus on character to them, rather than striving for likenesses. (You never know what they'll …
Last reply by CRToonMike, -
- 45 replies
- 3.2k views
After reading the call for entries for models for TSM2, I decided to try modeling a GIANT OCTOPUS for the evil squid category. So I spent a couple of hours surfing the web for reference and sketching.
Last reply by Sharky, -
- 13 replies
- 1.1k views
Here are some renders of my attempt to model the eponymous prop from the new Stargate series. I started it based on some promo pics that came out before the series, so a couple of features need to be "reinterpreted" now that I've actually seen the show; but even so, I don't think it looks too bad. Click the thumbnails for full-sized pics. I've also got some "white renders" of the entire model, front and back.
Last reply by littleandy, -
- 8 replies
- 1.2k views
The new animation composite for The Huntress is pretty nice. Man that really catches my eye. I was pretty impressed with it. I showed it to a buddy of mine who is a Maya devotee and he didn't say a damn word. What did you all think?
Last reply by Srmjr, -
- 14 replies
- 1.1k views
It's funny how inspiration can take you where you didn't think you were going. Case in point, John's thread on his Kapsule characters. I found them to be very cute and creatively stimulating. I have this pair of grape characters that I thought about redoing, so I did. Only thing is that in the redoing, I created totally new characters and I'm kinda surprised at the results. These characters are "bitties" (there was this elderly african-american woman who would stop by the pet store I used to manage every easter for her "bitties" -- baby chicks. The name stuck with me and I'm delighted to be able to use it) and they are kinda elfin, sorta fairy-like people. …
Last reply by CRToonMike, -
Hello, all. Well, this week's Animation Showdown got me really down, so I decided to cheer myself up with a new head. (Some people say a new brain is in order instead, but I just laugh at them. Hysterically. Until the persons in white coats come...) Anyway, here he is thus far, in a quick turnaround. He's my usual low-patch cartoony fare, but I think he might have potential for the future. I do wonder where to go with him next, as far as clothes and a body of some sort. Right now I'm leaning toward a gas station uniform, but I don't know why. Suggestions welcome. turnaroundhead_sor.mov
Last reply by Godfrey, -
- 9 replies
- 961 views
will post more later by the way it loops real well robot.mov
Last reply by johnl3d, -
- 3 replies
- 519 views
I was playing a game and had a gun in the game, so I quit and made the gun in A:M it is an awesome match in looks. look at link for 5 second lookaround of it, tell me what you think, it is my first real model Spinfusor Gun Test Animation
Last reply by CRToonMike, -
- 2 replies
- 450 views
Hi This file is a heavily compressed version of my entry to the April Competition at 10secondclub.com. I missed the deadline due to last minute compression problems. I was taking a 640x320 avi file, (13+ Mb), and attempting to get a 320x240 MPEG-1 file which fell between 1.5Mb and 1.8Mb. In the end I failed. The file shown here has been compressed as follows: 640x480 to 200x180pixels compressed with Sorenson3 at 20%. Audio compressed to 8bit mono using MACE 6:1 The results are not good so I am hoping that one of you wizards out there will be able to offer some advice. What is the best way of creating an MPEG-1 at 320x240 with decent sound and a legible …
Last reply by Paul Forwood, -
- 1 reply
- 489 views
did a quick ..too quick scrub through it...transport of object with aid of boolean sorry no blue smoke transp.mov
Last reply by tobinjim, -
- 0 replies
- 310 views
did a quick ..too quick scrub through it...transport of object with aid of boolean sorry no blue smoke transp.mov
Last reply by johnl3d, -
- 14 replies
- 1.2k views
http://greenwith.envy.nu/ My first WIP post. This is a stylized globe, using booleans to 'cut' the land masses into a sphereical shape. I am rendering a :20 rotation as a video element, it is taking 17 minutes per frame... A:M's booleans are quite powerful though...
Last reply by Rodney, -
- 7 replies
- 1.2k views
This anim is from the 10sec anim contest. It did not make to the month of June submission. I think I went over the file size requirement. Anyway hoped you guy like it and any comments are welcome. http://yojimbo1.homestead.com/10secClub.html Cheers, Somboun http://yojimbo1.homestead.com/main.html
Last reply by somboun, -
- 3 replies
- 977 views
Hi all. I really like what the programmers did with ver11, especially the way the panels slided in and out to have more room to work with. This got me thinking and I was wondering if this would be a nice feature request. It hard for me to explain so I did an avi of it. http://yojimbo1.homestead.com/files/AM.avi Cheers, --------------------------------------------- Somboun http://yojimbo1.homestead.com/main.html
Last reply by CyberSpark, -
- 7 replies
- 811 views
This is my first animation with particle system and force, the avi is a preview and my actual is in tga. However, I face some rendering defects in the final render and retouched inPhotoshop, see attached img. Any idea what is the cause? The entire sequence took about 15 hrs, currently trying object colision.
Last reply by Philip Fong,
