Work In Progress / Sweatbox
Subforums
-
Showcase (55,385 visits to this link)
-
- 530
- posts
-
A:M Stills (82,815 visits to this link)
-
Works In Progress (WIP) (57,190 visits to this link)
-
- 3.1k
- posts
5,143 topics in this forum
-
- 16 replies
- 1.4k views
I think I finally worked out the secret to modelling in A:M. There is no way to model in A:M. Or to be more precise there is no ONE way to model in A:M. When I grasped that it finally hit me. I can do the characters I want to do. There are still some issues with this model but its becoming clearer now. (Is this post less whiney for you? eh eh . JOKING) Cheers Mike R
Last reply by Rodney, -
- 7 replies
- 773 views
been trying to upload my first Am animation it's small but has sound clown.mov
Last reply by dawgking, -
- 11 replies
- 862 views
I made an entry for the 10 Second Club at the end of February. Actually, part of the work was for the club, and part was for another project I'm working on. Anyway, the version that was submitted for the club contest was pretty good, but after getting a little feedback I made some improvements before posting it on my site. Here's the direct link: http://www.jb-av.com/anims/friendfordinner.mpg 1.24 MB, MPEG-1 Enjoy!
Last reply by Alien_Films, -
If you have the bandwidth or time to kill I've posted a short animation on my ISP websight. I'm not sure how many hits they will allow so I'm curious to find out. The animation is one I started for one of the contests and didn't finish in time (or yet for that matter). http://users.adelphia.net/~chipotle/ Before I go back to lurking I must thank all you tutorial writers and tip givers. From Jeff Canton on, you're all very helpful . Pepper
Last reply by omoanime, -
- 7 replies
- 765 views
I started off this little adventure making a 3D version of an Al Gore caricature I have. I wanted to animate him singing Paul Shanklin's hilarious "Al Gore Paradise". But, as you can see below, drawings are usually made with two dimensions in mind. So with only a side view available, I did the best I could. At the same time I was making my first head model, and I'm still surprised, because I have always been in awe that people could make a model by making only half of the model. Unfortunately, Al Gore will have to wait. In the meantime, I have a nifty start on a gnome/leprechaun (can't believe I spelled that right) thing. So, why not? It's my first head mo…
Last reply by age234, -
- 18 replies
- 1.8k views
Hello smiley hashy people, I have just started a new wip of my friends head; I say friend but if he sees what im doing to him he might not be anymore! He's probably not the easyest subject as he has a broken nose, and i took the pictures after an evening of boozing so the rotos arent perfect but theyl do! I was aiming to get the concentric ring thing implemented, but im not sure its done quite right. heres a rendered image
Last reply by nixie, -
- 5 replies
- 586 views
How would you suggest I connect these two shapes? I know there's gotta be a better way than having four 5pt. patches touching each other.
Last reply by Jimmy neutron, -
- 7 replies
- 645 views
Need some help/feedback doing this parrot..(in beta3 of v11.) How can I get the feathers graduatly be bigger as they run down the body.. Any tips!? ( I thought I could give 11-beta version a production try.) Thanks /zued the swede
Last reply by Jimmy neutron, -
- 2 replies
- 432 views
box car textures WIP I've been getting more satisfaction from building textures now that I've adjusted my attitude by repeatedly chanting the acronym THWRT (pronounced "thwurt", it stands for "to heck with render times") to overcome my fear of multi-multi-branch materials. I took a chance and mixed modeled rivets (the darker ones) with bump mapped (all the sheet metal rivets) and was pleasantly surprised with the result. I've rationalized their different textures by assuming sheet metal rivets would be made from a different alloy than structural rivets. However the close-up image shows one, not unexpected, hazard to bump maps; the ladder rung's shadow does…
Last reply by Rodney, -
- 4 replies
- 557 views
Inspired by the fantastic Mascot work Pequod did for Briar. Pequod provided somewhere some great close up shots of the face of Briar. With this as inspiration plus the number 28 Face Tutorial Video by Dan Shimmyo available on ARM, I have begun my first semi-realistic head.
Last reply by Rodney, -
- 1 reply
- 462 views
What do you guys think?... it's my first model. But I kinda like the way he turned out... I must work on making my models smoother next time. I was actually kinda frustrated with A:M for a while it's veeeery difficult for me to get smooth surfaces... I will try to keep the 5 point surfaces to an absolute minimum. Now I will start adding bones. I'm gonna use the "backbone" tutorial to add the 2001 skeleton. I hope it animates smoothly. Anyway... comments, opinions, questions are most welcome! My Webpage My Webpage
Last reply by nerrazzi, -
New character im working with. Little animation test on my website. C and C welcome. PS-facial expressions were made using the book, "Stp Staring" by Jason Osipa-best ive ever done. hats off to Jason for the wonderful book. Thanks, SeanC. http://www.pallidus.net/animationwork.html
Last reply by jfirestine, -
- 8 replies
- 784 views
...It's shameful that I've had A:M for years and never attempted modeling a human head, so here it is. Please look at the spline layout and offer your (CONSTRUCTIVE ) thoughts- especially about the neck. I'm having trouble there. Also the ear connections are a little haphazzard, hazarrd ha..., oh you know what I mean. Sterling
Last reply by Scottj3d, -
- 4 replies
- 1k views
If people are interested I've updated my website with images of my latest character. She's rigged, smartskinned and textured. I still need to add specularity, bump, diffuse maps, and a ponytail etc , but thats down the track. http://www.shaunfreeman.com/wip.htm Click on the link to 'characters', and the 'Cuckoo Mother'. NOTE: Different character to the 'Wren Mother' which I have posted previously I've also updated a few other bits and pieces on the web page. Any thoughts that people have would be great.
Last reply by shaunf, -
- 10 replies
- 1k views
http://www.angelfire.com/film/moviepromo/index.html also links to some stills, and cast photos...
Last reply by zandoriastudios, -
- 1 reply
- 581 views
Here is a Cape Animation I've been working on, it's a work in progress. I'm not fully happy with it yet but so far this is the best result I've come up with The Cape was animated with the cloth wizard. If anyone here has any advice on how to get the cape to animate more naturally please help me with advice on Cape animation... Cape Test Thanks, Allen
Last reply by ZachBG, -
- 10 replies
- 1k views
If you been in the WIP forum you may have seen my model but if you havnt here it is textured and everything! What do you think?!
Last reply by pixmite, -
- 9 replies
- 1k views
This is meant to be a little demonic imp that flaps around and acts as a mascot for another as-yet-unmodelled character. The funny thing is that I just recently had some new insight into the A:M modelling process. Tonight I took this partially done model, that had been sitting on my hard drive for a few months, and added the wings and legs - and the bat wing skeleton is probably the most complex splinesmanship I've done in A:M. I managed it in about twice my usual modelling speed -Sean Givan
Last reply by kinsman, -
- 3 replies
- 595 views
Thought id show off my new model im working on. First time ive really played with color and especially bump maps. C and C definitely welcome! Thanks, SeanC. ps. that is just a temporary color map to ge tthe feel, not the final.
Last reply by pdaley, -
- 4 replies
- 1.2k views
Hi all, We just add a new 3d section at the web site with some new and old 3d test. Take a look. Your Feedbacks are welcome. Pepe VANHOP ANIMATION
Last reply by robcat2075, -
- 0 replies
- 382 views
Here's my tantalizing bit, and it's probably the last most of you will see of this until the final project. This is my WIP of an Aliens style motion tracker. I need crits and comments. Zachary T.
Last reply by zacktaich, -
- 9 replies
- 872 views
This is a low rez render of something I'm working on. I've got a long way to go yet. I realize that. It's basically pre-vis of a quick banking shot of a chase sequence in a sci-fi action adventure project that I've written and am pitching to direct. As of this render, the spider hadn't been fully textured (it is now, but I'm probably gonna have to re do it. ) Also, obviously the lightings not done, etc, etc, but I just wanted to "come out" so to speak and share a little of what I'm working on. I realize it's "just pre-vis", but I want to make it as best as is reasonable considering I'm not Peter Jackson.... yet. Its in the "CG Test Renders" folder of my Yah…
Last reply by Srmjr, -
- 2 replies
- 461 views
Can anyone tell me why the heck this is happening? I've tried doing everything I can think of. I swear, I may never get the hang of textures...
Last reply by SHADOWMASTER, -
- 2 replies
- 549 views
If you're curious, read along in the thread under "Animation Master: General Discussion" (I guess) ************************* hi gang. for someone who hadn't touched A:M in a bit, I don't think I'm doing too bad. Here's some of what I've tried my hand at so far. The helmet was first, in keeping with the request for it and for hats (first of many I hope) Then there's the night goggles to go with it. I started them but have to detail it all and get the head straps just right (can you tell I've had to wear them in the desert before?) Then there's the toaster. I started making the classic Sears model, all curved and pretty and all... ...but then I realize…
-
Pegasus gallop to jump WIP clip.
by Guest mrsl13- 1 reply
- 466 views
Im Back I made some changes that were suggested in a perviouse post and then made this new animation. Just an update of a project Im working on in this 800 KB Sor3 mov clip I have a galloping action that goes to a jumping action then back to a galloping action still needs work but it's a start...(pegasus horse model) I cant seem to get the hang of transition to next action to look very good so I just copy and paste keyfames from one action to the other to start a new action in the sequence.Anyway Im having fun even when I goof up.LOL Mike Cossey My briefcase SBC yahoo briefcase link...I hope http://f1.pg.briefcase.yahoo.com/bc/mscoss...case.yaho…
Last reply by Rodney, -
- 4 replies
- 496 views
This is a post I started in Animation:Master section. The attached image is to show my problem. I'll post again with a side view.
Last reply by ripples_rw, -
- 6 replies
- 663 views
I can't get projection maps to apply as anything but spherical. I don't know what's up, probably me being an idiot somehow. I was wanting either a difuse map, or a color map (or both) but I can't get them to actually show up on my model unless I have the interpolation set to spherical. Otherwise, it doesn't show up at all. Any ideas as to what might be going wrong?
Last reply by SHADOWMASTER, -
Hello, Animasters! Here is my new work. I'm tring to improve my modeling skills. Now I'm working on feet! I would like to know that You think.
Last reply by Grubber, -
- 0 replies
- 452 views
myGameTV.com is a new syndicated video game review TV show. The show airs in Florida as well as worldwide on the internet. We're like Siskel & Ebert on crack. We're seeking animated shorts 1-5 minutes long that are hilariously funny, maybe a little controversial. If they are gaming related that is a plus. Although there is no compensation, we offer screen credit and there is a lot of exposure and we can also plug your website on television. For more information contact: producers@mygametv.com Jeff Rivera Producer myGameTV.com
Last reply by jeffrivera, -
- 9 replies
- 900 views
This is the opening short scene of a project I am working on, lasting 00:09:15 and I wondered if anyone could advise me on: Composition Lighting Framing I am trying for a more professional feel to my projects and would like to get some input from the "pros" but all are welcome to comment. Oh yeah....the wolf model is not finished yet, I know it needs work. More images can be seen here:- http://home.btconnect.com/FatclownFilms/videopage_2.htm
Last reply by c-wheeler, -
Better Anti-Aliasing WITHOUT the wait !!
by Guest Greg- 28 replies
- 2.1k views
Hi guys, This is just an application of some fundamental image-processing theory to A:M The attached images where rendered in about the same time, even though one obviously has better anti-aliasing then the other. Contrary to popular belief, anti-aliasing is an objective measurement; NOT subjective. By performing a Histogram of your renders, the number of steps that appears in a histogram determines OBJECTIVELY how well you are anti-aliasing. This histogram analysis is only valid in pure color images (like the given example) and edge boundaries must be sharp (meaning no blurred edges). In A:M when you set your Blur to 0 . . . you ar…
-
- 7 replies
- 907 views
Well, this is my last Walk Cycle. Side Front Perspective Please, select "Save Target As..." ,and the videos are compressed with MP4, so you need Quicktime for view it. Thanks.
Last reply by Ernesto Esteso, -
A corkscrew made in A:M v11.0. I tried to reproduce Gobal Illumination lighting with only one light. http://perso.wanadoo.fr/ffave/img/Tire_bouchon.jpg Comments are welcome. Fabrice.
Last reply by Srmjr, -
- 6 replies
- 914 views
Hello everyone. This is my first AM project, I bought the software last week and I can't put it down! Especially since I had previously purchased Truespace 6.6, what a waste of time and money! Well I guess it was a tought me to appreciate AM. He will eventually be a soccer player. Sugestions and critiques are MORE than welcome. I could use all the help I can get. Thanks! My Webpage My Webpage
Last reply by kat, -
- 18 replies
- 1.4k views
OK I know that I post a lot of stuff but I want to post this. Its a torsoe and the blue on it isnt a texture...Its lighting! Its so kool! Anyways, I this is a torsoe that I have for a semi-realistic character. I dont want the body to be exact I want it to be fairly realistic with some cartoonish about it, but still noiticable that its a human type figure. Please give me some imput. Thanks, Robert Fiermonte WIRED!
Last reply by robvmonte, -
- 13 replies
- 1.3k views
Hey Guys, just wrapped up my demo reel and felt like posting a clip from it that was done in A:M. Some may remember this from a few months back..... but anyhows, here it is sorenson3 about 2.7megs http://www.3dartz.com/WIPS/WidClip.mov Mike Fitz www.3dartz.com
Last reply by 3DArtZ, -
- 5 replies
- 841 views
I am attempting to model the head of Gollum. I used a couple images from the web as rotoscopes and modeled from that. I think the head looks ok as a model (better than other stuff I've done) but the only problem is it does not really look like Gollum. Can anyone tell me what they think the problem is? Maybe his head is too boxy/square? Also, is it too spline heavy? Any ideas for where to lighten it up would be helpful as well. Thanks! Thanks for any input. Gollum Side Gollum Wireframe Front Gollum Wireframe Side Gollum Wireframe Perspective
Last reply by modernhorse, -
- 15 replies
- 1.2k views
OK well here is my robotic dog. I need help! I need to know which version is better! After thats done I will texure and stuff! The ball obove his head is where his eye will be.
Last reply by CreativeAustinYankee, -
Hi all, I am new to 3d software period. AM is the software I plan to learn with and I just started to understand the modeling aspects of the software. This is a screen shot of a rotoscope of my head that I did this weekend. I am still learning to decal and have had limited success as I take the selected "face" into a pose window but cant for the life of me figure out how to flatten it to decal it but I'll get it. I have about 12 hrs on this one and suspect the spline count is too high and need to work on the spline connections at the nostrils and corners of the mouth but am still very happy that it actually looks like a face. I am used to clay and paint but this is addict…
Last reply by Iham Wrong, -
- 36 replies
- 2.1k views
As the last push on this project commences (5 months and counting), I've been going back and reworking some of the older elements to bring them in line with the most recent - I've been working on this on and off for 3 and a half years so there is a very large difference in quality between the older stuff and the newer stuff! Anyhow, I thought I'd bring something to show and tell this week so here's my main character re-worked and re-textured for 2004. I'm only using decals (no materials) to save on render time and the maps were created in a method almost identical to that documented so well by Jim Talbot. There's some more work to be done on the lips, eye, forehead and sc…
Last reply by Parlo, -
- 7 replies
- 834 views
I'm working on ananime inspired head, and looking for some input. I have in mind that it will be a young girl, but I want to use the same head, with changes, to make other characters. I'm fairly happy with the face, but I'm not sure about the hair. I want it to render quickly and be easy to animate blowing in the wind. Any suggestions would be great.
Last reply by Rodney, -
- 3 replies
- 1.3k views
Anti & the Beast All my animations up to date Tell me what you think! thanks to Bloody Fur for the beast looking model!
Last reply by Srmjr, -
- 5 replies
- 1.4k views
Fun test of sound with motion it is also in the all in one Check it out, yes the motions are a little cheesy, but it was fun to make.
Last reply by Joe_Lunjen, -
- 4 replies
- 754 views
Starting an Apollo astronaut model. No textures yet. Or hands. I knew I forgot something! Dreading rigging this guy because he's so... thick! The good news is that he can't bend his back very much and probably doesn't need lip sync poses. Suggestions appreciated (wireframe to follow in next post). Zach
Last reply by ZachBG, -
- 19 replies
- 1.5k views
Well all I can say is I am really growing to hate modelling in A:M. lol Its just too long winded and so easy to botch up. In my opinion. Maybe It will get easier and more intuative. PLEEEAAASE. Still trying to find my way of modelling within it. This started out as a comic little girl.?!?! No idea at what point it went wrong I ended up trying to stitch the eyes and nose area which was difficult and perhaps impossible as you can see. The only reason it looks as smooth is because I used the porcelain material. I have ordered the 2002 A:M book to see if it clarifies anything. Cheers Mike R
Last reply by Srmjr, -
- 3 replies
- 1.3k views
I've had flash for 7 days now, and I wanted to make something as an exercise. I've also wanted a nice website for a while, so I put the two together and made a flash website for myself. Any feedback would be really appreciated. http://murc13.homestead.com/files/index.htm All of the 3d work in the gallery was made with AM.
Last reply by starving4rtist, -
- 31 replies
- 3.1k views
Ken (I believe) posted this yesterday in the What's New area at www.hash.com. http://www.hash.com/users/milos/schlitzy3.mov WoW! These guys need to do more together. Hic!
Last reply by Elm, -
- 11 replies
- 2k views
Well, I've been working on this site with a huge team of other people for over 2 years, and it finally launched today. It'll be a while before I can put up any of the work on my site so I'm showing it on theirs. Some of the modeling was done in AM... All the hard stuff at least ;-) (namely any statues you see) I wont go into much other detail at this point. I led the group who was responsible for the 3d development. We recreated... The Ancient City of Alexandria, The Giza Plateau in 2 time periods, The Temple of Luxor over 4 time periods, and The entire tomb of King Tut as it existed when it was found. We also created all of the 3d for the Multimedia anima…
Last reply by jo b., -
- 33 replies
- 3.2k views
Working on an anime-style elf, almost done. Just a lil more accessorizing and final rigging. AM 10.5
Last reply by Rodney, -
- 3 replies
- 779 views
So...I've been modeling a new character. But I started to work on the foot, and I completed a little more than half of it. But for some reason there is an area which is protruding from it, that always ends at 0,0 on the grid; no matter where I put the rest of the foot. This happened to me before and I was able to fix it. But this time, the "thing" has no CP's or splines or anything. I don't know how it got there, but it just won't go away. Its totally brought my work to a screeching halt. If Someone could solve this mystery I would appreciate it very much. Thanks! Robert Lazzarini
Last reply by robcat2075,