Jump to content
Hash, Inc. Forums

Leaderboard


Popular Content

Showing most liked content since 02/11/2018 in all areas

  1. 5 likes
    Installers: Windows 32Bit Windows 64Bit Intel Mac v19.0 Intel Mac SSE4.2 v19.0 SDK UpDate Change Log: Fixed All: 0006942 Audio in Chor doesn't play Fixed All: 0006941 Crash on Decal scaling New All: for chor new entry in the menu -> "Bake and Remove Bullet Constraints" bake simulation data and remove than the Bullet Constraints from the models If the Shift key is hold while clicking this entry, a simulation run is first done for all Bullet Constraints New All: for objects new entry in the menu -> "Reset Main Bone", set the main model bone back to the default values (helpfull for simulation with bullet constraint, if the main bone not at default , unexpected behavior can occur) Fixed All: 0006934 Bullet "Bounce" parameter has no effect Fixed All: 0006938 Bullet simulates with strange results Fixed All: 0006820 Specular highlights not working on transparent surface. Fixed All: 0006931 Magnet Mode distance handles disappear Fixed All: 0006935 Rotoscope disappears if resized Fixed All: 0006933 32 bit version crashes Fixed All: 0006928 AI-Wizard crashes A:M Fixed All: 0006932 Explode/Rebuild doesn't work Fixed All: 0006937 Crash on adding Null Fixed All: 0006936 Crash on Save Fixed All: 0006895 Depth of field doesn't work Fixed All: 006894 Scale keys lost after save Fixed All: 0006914 NetRender: Corrupted surface on first frames Fixed All: 0006927 Final render darker than previous versions Fixed All: 0006926 Decal Image name lost after adding non-loca material. Fixed All: 006921 Crash on dragging Groups in PWS Fixed All: 0006919 Crash after selecting CPs Fixed All: 0006912 Netrender: Can't expand "Time" Column Fixed All: 0006913 NetRender: Disabled slave Prgress precent freezes Fixed All: 0006925 endless loop for complex undoing operations Fixed All: 0006920 Pose slider made by Push_CPs doesn't work Fixed All: 0006855 Soft shadows not soft Fixed All: 0006917 Reordering Groups after making keyframes in Chor causes crash 11 Fixed All: 0006922 Substeps for frame render is always 0:0... Fixed All: 0006811 incorrect real-time and progressive renders on particle image sequences New All It's now possible to show in which group a cp is in.For existing installations the button needs to be add manually. Add the button Tools->Customize->Commands->Manipulator -> "Show Groups, where the CP is included" to the toolbar, or "Reset Toolbars" For new installations it's default in the manipulator toolbar. Works only for single selected cp's. OSX latest supported version is OSX 10.13.6, because my mac can't be updated to a newer OSX version
  2. 3 likes
    The library printed my Sphinx j model. Here are a few pictures. As you see, it still did not print perfectly, but I am happy with the result. Thanks again to everyone who helped. Your ideas, illustrations, and video clips really taught me a lot.
  3. 2 likes
    Just noticed someone wearing this Tee Shirt with a spoof on the famous Disney signature. Pretty Funny... Will this product take you to the Magic Kingdom?
  4. 2 likes
    Rob your the best!!! I'll check these out. Rusty An ad for my scifi books I made in AM. ExplorerTwoAd.mp4
  5. 2 likes
    Hi Robcat, You have always been very helpful. It's too late for the contest, but it just so happens that my project involves a model of a plane.
  6. 2 likes
    I decided to hold off on the laptop, but have been working to install Windows on my Mac via Boot Camp today. A much easier process than the one I remember from the olden days (which involved burning an install disc and lots of hoops to jump through.) Everything seems to be fine, so far. I've set up a Dropbox folder that I can use to share files with my Mac and I think it'll be good for my productivity to have a kind of distraction free workspace when I'm working in A:M.
  7. 2 likes
    Testing out the Mac version of the MatCap shader (thanks to Elm & Steffen!) Forgot how much fun it was to play with...
  8. 2 likes
    This question came up in Live Answer Time today and I thought I would post the official word from Hash (link is to store page): Can A:M use multiple cores? A:M is currently not fully multi-core-optimized. However A:M is able through Netrender (included for free in v16.0 and up) to use multiple cores for rendering.  OpenMP is used to utilize multiple cores for several operations. More operations are altered to use multiple cores in each update.  Since A:M is a rendering application, it is recommended to use a CPU as fast as possible to decrease rendering time. So if you have an 8 core system, base AM may not make full use of all 8 cores however if you pick up an additional 4 or 10 netrender nodes for the nominal cost of $10 or $15, you can utilize the other cores as background render nodes. So those of you contemplating Threadripper/Ryzen/Ryzen 3000 updates may find this useful info. *EDIT: I should add, most programs are not fully massively-threaded aware yet. I expect that to change over time, but for right now Netrender is the best way to make use of those extra cores.
  9. 2 likes
    A fine New Year to you all...
  10. 2 likes
    Hey everybody, I just wanted to wish you all a very Merry Christmas with a small little card created in A:M :). Best regards, have a nice celebration and keep on splining *Fuchur*
  11. 2 likes
    Hello, There is better than Troer (more complete), There is the plugin of Nemyax for Blender, which converts any format that can be imported in Blender, to mdl :
  12. 2 likes
    https://zandoriastudios.com/tutorials/uv-tutorial/
  13. 2 likes
    It took a ton of work, but it's done. A:M Stills is now here and almost all of the images where saved. I'm going to look in to if there is a way to users to 'claim' the image. But I have a lot of work before I can do that I think it will have to be done in the DATABASE it's self. But enjoy!!!!!!!!!!!!11 https://forums.hash.com/gallery/category/7-am-stills/
  14. 1 like
    Hello Forum- have not been here in awhile! Busy! A client recently inquired if I could perhaps make a SnapChat lens... he may as well of asked if I could have made diced clabberboards, because I had no idea what Snapchat... or a snapchat lens even WAS! My research taught me SnapChat has been around since 2011 and is a popular (amongst the young-uns) social media chat and photo-sharing software, much like Facebook. After downloading it to my phone and playing with it i realized it was resonsible for much of what I have seen on Facebook as far as kids with bear-noses and fuzzy ears, face- paint and sparkles that track with them of distort their face and voice for the length of a very short movie. I downloaded Lens Studio, a free software from Snapchat.com and discovered the wealth of possibilities I had unearthed, as far as 3D and Augmented reality... my client was thinking of using it in a somewhat commercial way- and light-bulbs kept flashing in my head... IDEAS...POSSIBILITIES! Within the week I have been learning Lens Studio they have now released V2 which goes even deeper into the realm of gameplay. My first inclination was... can I get my A:M content into this thing, and seeing that it only allows .FBX file format (A:M needs to add this FEATURE REQUEST!) I embarked on Gerald's (A:M user Fuchur) 'FBX Pipeline to Unity' tutorial - https://www.patchwork3d.de/html/page.php?page_id=64 and discovered that thru A:M's robust .X exporters and purchase of Ultimate Unwrap ($50) I am indeed able to pipe my 3D animations (keep 'em simple) into Lens Studio- and the process is NOT as painful as I pre-judged it to be. The debate is open as to whether Snapchat has seen it's better days- or needs to become part of Facebook or Twitter, or perhaps there is something better out there. I am wondering what the forum knows of this... is anyone else making Snapchat Lens's... does anyone even bother with Snapchat at all? Thoughts.
  15. 1 like
    too lazy to do woody woodpecker so...
  16. 1 like

    © © webfeet media 2019

  17. 1 like
    Solution: Ok to everyone that helped with this problem. I got it fixed. I opened my MacKeeper/Default Apps/searched 'hxt'/ assigned AM to default app to open....BINGO! Checked it in every version ALL WORKING. So thank you to all of you for the help.
  18. 1 like
    i printed it out again with supports enabled and a size of about 7 cm x 3.5 cm x 6.5 cm. It already looks promising. printed with 300 micron layerheight in black pla on my replicator 2. not perfekt but pretty ok already. As you can see we have supports at the front at the nose and the mask. i'll break them away and see how it behaves. best regards *Fuchur*
  19. 1 like
    An alternative to the standard chor paths... We can also use any spline from any model in the chor as your path. Create a new (empty) model and drag/drop that into the chor. Draw a spline and edit that path as desired in the Chor. A reason I prefer modeled paths is that they can be considerably more complex than standard Chor paths. Under the hood Chor paths are just specialized models with limited parameters.
  20. 1 like
    Hit the "A" key and then draw your path. Hope that helps, Rusty. path_tool_example.mp4
  21. 1 like
    Here is an example I did long ago that uses the path constraint to place bones along a spline. Then you just animate the points of the spline. TentacleSplineRingPath04.zip TentaclePathB.mp4
  22. 1 like
    Great solution, Robert!
  23. 1 like
    Here is a test implementation of David Simmons' suggestion of a spine switch. It's fussier to create than using a premade rig but once it works it does make for a better controlled spine... tubeFlip000.mp4
  24. 1 like
    I got the TSM2 spine that i was trying yesterday at LAT to behave. Basically this is animation of a pelvis bone and a torso bone to get the flips going, The interpolation of the IK spine isn't as smooth as I hoped so i will look into other solutions. ButterFlip_12.mp4
  25. 1 like
    I fully realize the reason for the snark but based on their paper these guys are doing it algorithmically. Something that an experienced A:M user could do in an hour (or more) will someday be done by anyone … in a few minutes … on their phones … just for lols
  26. 1 like
  27. 1 like
    I just went to the store and selected Hash, Inc. Software (3). The center choice is the one I've always purchased.
  28. 1 like
    All it needed was the rotate offsets to be set to "0" on the BicepLeft bone's "Orient Like Control Bicept Hint Left" . Just turn off "Compensate Mode" when you apply that constraint. Hope that helps. Rig_update.prj
  29. 1 like
    There's a lunar eclipse going on now. Go out and look at the eclipse but remember to wear your moonglasses. https://www.timeanddate.com/eclipse/in/usa/dallas
  30. 1 like
    Fantastic! Once again,... the "persistent smarty-pants" comes to the rescue....😀 Many thanks!
  31. 1 like
    This year is already full of surprises, the first one being pointed out by Robert: my account is still active! And on top of that, I somehow remembered the password! Thanks to Robert for being willing to start this thread on my behalf. I hope that Animate a Face will still prove useful to the community!
  32. 1 like
    See if you can't view the author of a 'Like' now.
  33. 1 like
    Happy New Year!! <<<--- link to animation. Click on it to watch.
  34. 1 like
    Wait, so what they're saying is you make a 3d model based on a subject in an image, rig it, weight it, texture it using the original photo as a reference and then make an animation out of it. That's amazing! Revolutionary! Its never been done before, Nobel prizes all around.
  35. 1 like
    Merry Christmas and Happy Holidays to all my fellow AM users.
  36. 1 like
    Installers: Windows 32Bit Windows 64Bit Intel Mac v19.0 Intel Mac SSE4.2 v19.0 SDK UpDate Change Log: Breaking Change: sdk changed, external plugins must be recompiled Fixed All: 0006908: Layer are not visible in chor rendering with Render Lock Mode (green button) Fixed All: 0006899: View Undo, View Redo shortcuts not editable Fixed All: 0006906: Reordering Null in heirarchy causes crash Fixed All: 0006907: Adding one model to another model causes crash Fixed All: 0006904: Cloth object doublesizes and misses deflector objects Fixed All: 0006902: AppHang on Render Fixed All: 0006901: Five pointers and splines disappear Fixed All: 0006903: Duplicator wizard doesn't work. Fixed All: 0006900: Can't Undo after Lathe. Screen redraw stops working. Fixed All: 0006898: UV-Editor does not show any wireframes/CPs of mapped objects... Fixed All: 0006896: Distrotion box in Action causes crash Fixed All: 0006893: Multiple Models on Path not on path and wrong multiple For the second problem (does not insert choosen number of models) a new checkbox "Allow overlapping" is added , then the choosen number is always imported , otherwise a overlapping bbox check is done and this can reduce the number of imported models. Fixed All: 0006887: Pose Sliders do not show current value of Pose Fixed All: 0006888: Image sequence "Frame" settings are ignored Fixed All: 0006890: booleans broken in final render
  37. 1 like
    Welcome back, Warlock! If you just need the OBJ to be in a Chor and move around as solid object, don't import it into a model window, import as a Prop. That will import in a few seconds. If you really want to convert a polygon model to splines, because you really want to edit it as splines, A:M gets very slow at creating CPs once you get above a few thousand and most glamorous OBJs have many more vertices than that. It will be slow, but i have left OBJ imports to run overnight and it did finish eventually. New in version 19 is "Stick to Surface" that lets you draw new splines on the surface of a model or a Prop. You can quickly import an OBJ as a Prop then use it as your template to create a new, properly-splined A:M model.
  38. 1 like
    Further dev on helmet hair with displacement map and "Westin" specular shader (lower right). The image map is Photoshop "noise" with a horizontal blur.
  39. 1 like
    The augmented reality stuff I think has the potential to be bigger than the VR stuff. Check out the video below: My 12 year old self probably would have flipped at the thought of that .
  40. 1 like
  41. 1 like
    So now that the Animation Master forums is on a new server that supports the latest software! the forums will be always in the latest and greatest version. You can read more on what is coming for 4.4 below. https://invisioncommunity.com/news/product-updates/44-turbo-charging-loading-speeds-r1109/
  42. 1 like
    and https://invisioncommunity.com/news/product-updates/44-animated-gifs-r1102/
  43. 1 like
    YouTube it is. Here is the link: https://youtu.be/yLnrZywVnbA Sorry about the misfires... If anyone can provide a Mac-based workflow for reliably producing videos that will play in the forum -- much appreciated.
  44. 1 like
    Here is a movie of my Rhino-Beest model (so far). Looking at the video of Jansen's Rhinoceros, it appears that the six leg pairs (front + rear = pair) each have separate cycles. I decided to simplify the task of boning/constraining the model/action by making 3 pairs of bones/constraints and assigning CPs to leg bones so that the legs move symmetrically on either side of the model centerline. The action is driven by bones M1 through M6 which rotate around a common center and each move one of the leg mechanisms plus its respective CP doppelgänger. The walk cycle that seems to best resemble Jansen's Rhinoceros has pair M1-M2 (front-rear) set at 40 degrees apart, then an 80 degree gap followed by M3-M4, etc. Thanks again to Robert and Serge. Rhino-Beest-gait2.mov
  45. 1 like
    Robert, A brilliant solution and excellent explanation. For me, the key concept that I would never have arrived at is making bone F a child of bone B, without any intervening/connecting linkages. And your model and action are far simpler than my almost-works attempt. Simpler is always better in A:M world. Thank you. Joseph
  46. 1 like
  47. 1 like
  48. 1 like
    So with the A:M Reports moved, and hours of work i big program is finally getting fixed. For years all of the attachments in A:M Reports have been stored in the database. Since v11.0 back when you could email in reports. This makes the database really large 4.6gb for a small database(when text only). Now all the images/attachments are getting move to a folder not the database. This will mean hours saved next update or move!
  49. 1 like
    I've added the weekly 'Live Answer Time' to the Community calendar: https://forums.hash.com/index.php?/calendar/
  50. 1 like
    Another in-development product similar to MS Hololens. Meta 2 has twice the angle of view (90°) of Hololens and appears to have better hand-hologram interactions, but doesn't seem to have the solid placement in space of Hololens. I presume that is a latency problem due to it being a tethered headset (requires two USB 3.0 ports plus an HDMI) rather than a self-contained computer like Hololens Their promotional video A live show demo...

Announcements

×
×
  • Create New...