itsjustme Posted June 13, 2010 Author Posted June 13, 2010 I posted the beginnings of the first set here. Quote
itsjustme Posted October 29, 2010 Author Posted October 29, 2010 I figured I'd better post a "stay alive" post to show that this area isn't dead. I got a little side-tracked fixing the biped rig after finding a problem during an installation and decided that I should finish what I said I would...about a year ago. So, I updated Squetchy Sam's hands and tweaked his arms and shoulders a little so that I could use him in a rig installation tutorial. As soon as I finish tweaking his thumbs, I'll get started on the videos. I've got a few more things for Bertram's first set, but they aren't in a state that I can show yet...those are coming too (I also have to update the Quad Rig). Quote
kwhitaker Posted October 31, 2010 Posted October 31, 2010 great idea for the pockets, itsjustme, pants look nice to. Quote
itsjustme Posted November 15, 2010 Author Posted November 15, 2010 I'm forced to post another "stay alive" post for this thread...very little time the past two weeks. I'm going to be back to working on the rig installation tutorials this week. Quote
itsjustme Posted November 29, 2010 Author Posted November 29, 2010 Another update on what I'm doing...don't want it to look like nothing is happening. I've been tweaking the biped installation rigs and add-ons to (hopefully) make things easier to position...mostly fingers and toes. Quote
Admin Rodney Posted November 29, 2010 Admin Posted November 29, 2010 David, Sometimes it can look like we aren't paying attention... but we are! I always look forward to your incremental updates and what everyone is up to. Quote
itsjustme Posted December 17, 2010 Author Posted December 17, 2010 I'm still working through the installation rig update and tutorial. I've posted a temporary rig update here for the time being. In it, there are some fixes to the mouth, neck, hiding Poses and a change in the method of installing the fingers and multiple toes. Quote
itsjustme Posted January 8, 2011 Author Posted January 8, 2011 Unfortunately, I'm forced to post another "stay alive" post. I'm presently working on some hand rig improvements...lots of testing. They are getting better, but not where I want them to be yet. Once that is worked out, I'll see about adding a little to the face rig. Quote
*A:M User* Shelton Posted January 9, 2011 *A:M User* Posted January 9, 2011 David looking forward to seeing some more to the st area Steve Quote
itsjustme Posted January 10, 2011 Author Posted January 10, 2011 David looking forward to seeing some more to the st area Steve I'm trying to get back to it, Steve. December is my busiest month...I'm just starting to get some time again. I've also got some rig updates working and intend to get the installation tutorials done. Quote
itsjustme Posted January 27, 2011 Author Posted January 27, 2011 Just another "stay alive" post. I've been doing a lot of work on the hand rig. I've improved the squetching and the overall workings. I decided to finally separate the controls for curling the fingers to something similar to Mark Skodacek's 2008 Rig...separating them makes a lot more sense. I've reduced the number of Poses because of the design changes and did some combining of a few others and added some fan bones to get a little better look to the bends. Once I get a version of Sam finished, I'll post it for testing. After the hands are updated, I've got a few additions for the head and face rig that I want to put in. Then, those tutorials can get done...yeah, I'm taking way too much time on this, but I want all of the additions in before I make a comprehensive tutorial. Quote
itsjustme Posted February 22, 2011 Author Posted February 22, 2011 I've been bouncing around a little, so I'll have to make another "stay alive" post in this thread...I've been spreading myself a little thin, but things are still getting done. I spent a couple of evenings worth of time putting together three "Quick Start" tutorials on Expressions that are in this thread. I'm hoping it is the start of a large collection of such tutorials on a number of subjects made by the community...we'll see. I felt that it was time to make the ones I did...I'll make more as time permits. Still tweaking the rig...which I feel is improving steadily. Quote
itsjustme Posted March 14, 2011 Author Posted March 14, 2011 Still tweaking the rig, but I think I'm going to do a little modeling on the second set starting this week (I think I'm going to have a little time for a change). I still have some things to do to the first set, so I'll try to work that in as well. I'm going to try to divide my time while working in A:M to see if I can keep things from grinding to a halt while I get non-Bertram things done as well. Quote
itsjustme Posted March 25, 2011 Author Posted March 25, 2011 Okay, I'm in the middle of my experiment with working on a little of everything at once. I've done a little modeling, but I can only show one small part of it at this point...a break room chair. I've got the basic break room set roughed out and a break room table almost finished as well. I've also put together another tutorial on Expressions covering the "Abs()" and "RGB()" functions which I posted here. It's not as much as I wanted to get done, but I can at least show some progress. I'll see if I can get enough of the break room finished to post a thread for it and then do some more work on the rig. Quote
itsjustme Posted April 8, 2011 Author Posted April 8, 2011 Just another update for this thread. I made another QuickStart Expression tutorial on making a circular orbit here that was also used to make a propeller rig with throttle for Jake here. The progress on the break room is in this thread. Now, I'm going to bounce back to the rig for a few days and make another Expression tutorial. It feels better actually seeing things get kicked out. I'll keep bouncing around between things for a while and see what happens. Quote
itsjustme Posted April 22, 2011 Author Posted April 22, 2011 Since my last post in this thread, I've made another QuickStart Expression tutorial, this one uses the "Max(a,b)", "Min(a,b)" and "Round(n, modulo <>0)" functions (I had to make it code...otherwise I got some smilies in there), here. Once again, there is an included subtitle file. I've also done more work on the Squetch Rig...at the moment I'm updating the thigh fan bone setup, fixing an Expression setup that might break down under some conditions and tweaked the modeling some more on Squetchy Sam. I have what may turn out to be three more Expression tutorials in the works (I haven't decided how I want to divide things up yet) and I'm going to try to release another temporary "stop-gap" version of the biped Squetch Rig before I start working on the face rig portion of the updates. I'm hoping to start releasing these in a week or two, if things go well. Then, I'll get back to some more modeling on the Break Room set. Quote
itsjustme Posted April 25, 2011 Author Posted April 25, 2011 Okay, the stop-gap update for the biped Squetch Rig is in this post. Next up is a few more QuickStart Expressions tutorials, then back to some modeling on the Break Room. Quote
itsjustme Posted May 13, 2011 Author Posted May 13, 2011 I haven't been able to work on what I had planned for the past couple of weeks...I'm hoping to get back on track next week. I doodled a couple of things (salt and pepper shakers and a door stop) for the break room to clear my head. Not very much, but any forward movement is better than none. Quote
itsjustme Posted May 20, 2011 Author Posted May 20, 2011 Another small step forward on the break room...I modeled a fire extinguisher and its' wall mount (I'll be doing the texturing all together later). Quote
*A:M User* Shelton Posted May 20, 2011 *A:M User* Posted May 20, 2011 Great looking models, David! Quote
itsjustme Posted May 30, 2011 Author Posted May 30, 2011 I decided to change the doorstop to a magnetic one (several reasons for the change) and I modeled the first-aid kit for the break room. Still a lot to do and my self-imposed deadline for getting the sets modeled is fast approaching...I want to texture and light the sets in early July. I've done some work on the face rig in the Squetch Rig...I'll probably be posting a test version of Squetchy Sam sometime this week, if all goes well. The first of the two tutorials I'm working on looks like it won't fit the criteria for a "QuickStart" tutorial...I don't think there's any way to make it under five minutes. So, that one will end up being longer than I had initially planned. Quote
*A:M User* Shelton Posted June 1, 2011 *A:M User* Posted June 1, 2011 Great looking stuff David Quote
Hash Fellow robcat2075 Posted June 1, 2011 Hash Fellow Posted June 1, 2011 Looks like real movie stuff you're making! Quote
itsjustme Posted June 1, 2011 Author Posted June 1, 2011 Looks like real movie stuff you're making! I hope so, Robert. Unfortunately, these are the best I'm able to do...although I'm getting a little better as I go along. I'm shooting for a "cartoon real"...I think I can get that if I put the work in. Quote
itsjustme Posted June 2, 2011 Author Posted June 2, 2011 A little more progress, I modeled and rigged three sets of light switches...the break room will use the three switch one. Now I'm going to see if I can get some work on the face rig done. Quote
itsjustme Posted June 2, 2011 Author Posted June 2, 2011 I posted the test version of Squetchy Sam with the possible additional face controls here. If you have time to test him and provide feedback, I would appreciate it. Next, back to a tutorial I was working on. Quote
itsjustme Posted June 14, 2011 Author Posted June 14, 2011 It took a lot longer than I planned, but, I finished a tutorial on making a scalene arm rig....it is posted here. Now, I'm going to have to concentrate on nothing but modeling for a couple of weeks in an effort to meet my personal deadline on getting the two sets ready for texturing. Quote
itsjustme Posted June 29, 2011 Author Posted June 29, 2011 Here's the refrigerator for the break room. I thought about adding more detail, but I think this gets the job done adequately...I will be adding a brand logo to the upper door. Quote
Hash Fellow robcat2075 Posted June 29, 2011 Hash Fellow Posted June 29, 2011 mmm... refrigeration. Looks good! Quote
largento Posted June 29, 2011 Posted June 29, 2011 You've done a tremendous amount of work, David! All of it impressive! Quote
Admin Rodney Posted June 30, 2011 Admin Posted June 30, 2011 When I think any project ahead of me that requires high production value, quality and detail in computer modeling... you are my inspiration David. I don't say it often for fear you'll get too use to the praise, but... your work is and remains meticulously impressive. Quote
itsjustme Posted July 1, 2011 Author Posted July 1, 2011 I appreciate the encouragement, guys. Here are the electric sockets I made for this project...one with a circuit breaker and one without. Quote
*A:M User* Shelton Posted July 1, 2011 *A:M User* Posted July 1, 2011 Awesome David. Really nice. Steve Quote
johnl3d Posted July 1, 2011 Posted July 1, 2011 I wish I could model something as nice looking and normal looking great stuff David Quote
Paul Forwood Posted July 1, 2011 Posted July 1, 2011 Amazing stuff, David! Next you'll be modelling the wires running through the walls! Quote
mouseman Posted July 1, 2011 Posted July 1, 2011 I'm in awe of all your modelling skills, perseverance, and attention to detail. Any idea what the render times of a full scene are going to look like? I suppose it would vary greatly depending on the textures. Quote
John Bigboote Posted July 1, 2011 Posted July 1, 2011 Sure is a lot of detail, accurate and beautiful. I don't know what kind of story you are working on, but I envision one where there is a heavy narrative, and as the story is being told the camera slowly pans the rooms, showing all of this imagery- making it the 'star'. Quote
itsjustme Posted July 1, 2011 Author Posted July 1, 2011 Any idea what the render times of a full scene are going to look like? I suppose it would vary greatly depending on the textures. At the moment, an AO render of each set is about forty-five minutes. Of course, there are no textures or lights, etc, so that number may go up. Also, I'm running a 32bit OS...when I get to rendering, I'll be running a 64bit OS, so that will cut some of the time down. However, the background is only going to be rendered once per angle with anything that is animated being rendered separately and composited onto it...which will cut the overall render time down considerably. I don't know what kind of story you are working on, but I envision one where there is a heavy narrative, and as the story is being told the camera slowly pans the rooms, showing all of this imagery- making it the 'star'. You'll be surprised at how much of this detail doesn't show up in the final animations, Matt...at least in the first one. The idea is that these sets will be used multiple times. I'm leaving myself as much latitude as possible so that there aren't limitations on the camera angles I can use. Detail is easier to not show than to add later, I'm thinking. Also, some of these models (mostly the general purpose stuff, is my guess...the "signature" things I'd rather keep for myself) may eventually be released for the community and I have no idea what angle they will be seen from in other productions. Quote
mtpeak2 Posted July 1, 2011 Posted July 1, 2011 Looking great, David! Looking forward to seeing the final set. Quote
itsjustme Posted July 29, 2011 Author Posted July 29, 2011 Over the past few weeks I've added to the Break Room thread...I've still got some modeling to do there. I just posted an update to the Squetch Rig here. Quote
itsjustme Posted August 5, 2011 Author Posted August 5, 2011 Another very small step forward...a coffee maker for the Break Room. Quote
johnl3d Posted August 5, 2011 Posted August 5, 2011 Nice now you need the glass coffee pot..make a spare in case the first one drops Quote
Hash Fellow robcat2075 Posted August 6, 2011 Hash Fellow Posted August 6, 2011 I appreciate the encouragement, guys. Here are the electric sockets I made for this project...one with a circuit breaker and one without. When did people start putting the ground on top? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.