sprockets New Radiosity render of 2004 animation. Will Sutton's TAR knocks some heads! Learn to create your own tool bars! Behind The Scenes: A:M and Animatronics Jeff Cantin's Classic Splining Tutorial Strange Effect, video demo and PRJ included John blows up a planet, PRJs included
sprockets
Recent Posts | Unread Content
Jump to content
Hash, Inc. - Animation:Master

GeezerBot


Recommended Posts

[formerly "GeazerBot]

I'm dusting off a project I've neglected for over a year. I want to rig him up for animation, but need a somewhat simplefied or restricted motion given how he is constructed. His knee and elbow joints need to rotate about a single local axis as they are simple hinge joints. Anybody know how to restrict the movement accordingly? Same goes for the "toe" joints on his feet and most of the finger joints. Oh, yah...he also only swivels around one axis at his waist as well. All the other joints are ball and socket joints, so they can have a very wide freedom of movement accordingly.

 

http://wjgaylord.brinkster.net/GeazerBot_f-b.jpg

image.jpeg

 

This "poses" (pardon the pun) a challenge if you want to use a labor saver like The Setup Machine. There is no spine to speak of, which is the main challenge. This may be an opportunity to learn more about such rigs.

 

I do want to be able to smoothly vary between forward and reverse kinematics in the arms and I want the typical null targets that make animating the legs easier, too. Any suggestions? I have Raf Anzovin's "Dem Bones" tutorials, which are very helpful, but take a bit of time to digest. I have used both the Anzovin TSM rig and the AM 2001 rig. Any updated tutorials on constraint setups for such rigs?

 

Bill Gaylord

Link to comment
Share on other sites

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Dang it! I misspelled GeezerBot on the title. (That's interesting...the spell checker didn't catch that one! ;) ) Oh, well.

 

Here is a quick doodle I did during a break from working the Dragon Con art show in Atlanta. This is an idea I had for the GeezerBot's companion, which I plan to model soon.

 

http://wjgaylord.brinkster.net/RoboPup.jpg

image.jpeg

 

He's basically a robochihuahua.

 

Bill Gaylord

Edited by robcat2075
missing image restored
Link to comment
Share on other sites

I built him from scratch. I use the DarkSim Simbiont plugin for AM to get the corroded copper look. It is a free plugin you can download from the DarkSim Web site: http://www.darksim.com/ . There are a number of free "darktrees" you can download from the site as well, including a number of metalic textures. These textures are procedural and are calculated in volume space and mapped onto the model surface as it intersects the space...they are a bit computationally intensive, but they result in some very interesting textures. They also sometimes have aliasing issues on long views, but for relatively close-up scenes they are fabulous! Pretty clever folks at Darkling Simulations!

 

Bill Gaylord

Link to comment
Share on other sites

Looks great Bill! :D

 

If you're having trouble with what appears from your description to be a mechanical type movement I'd suggest you contact ddustin , if he does not respond to this thread.

 

He specializes in mechanical models.

 

Hope this helps. :D

Link to comment
Share on other sites

Does anyone know how to make a mesh render as only lines, with no patches showing? Below are the ears of the robochihuahua, which I want to appear as though they were wire mesh screens. Anybody know how to fix this? (I've changed the color and contrast to make the details show up better.)

 

http://wjgaylord.brinkster.net/Ears.jpg

image.jpeg

 

Bill Gaylord

Edited by robcat2075
missing image restored
Link to comment
Share on other sites

There is only one obvious color setting when you activate "render-as-line"--at least that I've been able to find. There has got to be a way to do this, though!

 

May have to just add some extra control points as Biotron2000 suggested.

 

Thanks for the suggestions.

 

Bill Gaylord

Link to comment
Share on other sites

Bill,

 

This technique gives you just the lines, in any color you want. BUT , it uses transparency and that's set on the Model level (not on the group level) so you would have to attach the ear model to the rest of the model in the Chor and that will take some funky constraints (although I have some ideas on that - constrain a bone in the ear to a dummy ear bone in the model to orient like and translate to. move the dummy ear bone and the ear should follow). Depends on how animated the ears will be.

 

give this a try. Group the ears and set the color (also you can set ambience, Line width and glow) and render as lines. in the model, set the transparency to 99.

 

The only other way to get the mesh ear look (that I can think of) would be a transparency map and applied to the ears.

Link to comment
Share on other sites

Thanks for the info! I'll try that shortly. Here is the RoboChihuahua as he stands so far. A few refinements left to go, but this is his essential form. Any suggestions for improvements will be appreciated.

 

http://wjgaylord.brinkster.net/RoboChihuahua02.jpg

image.jpeg

 

Bill Gaylord

Edited by robcat2075
missing image restored
Link to comment
Share on other sites

Looks great, Bill - can't wait to see him in action!

I'd like to see it against a lighter background. Also, is the abdominal connector accordian-ed? Its hard to tell as it's so dark.

As for the ears, I think a tranparency map might work as well. I tried to do it yesterday but could not get it to work (still learning about alpha channels, etc.). I also tried adding control points to a similar-looking ear mesh model. That worked, but the extra CP's distorted the mesh. I don't know if you can add a CP to a spline that stays in line with the rest of the spline.

Link to comment
Share on other sites

William,

 

The way I limit how my mechanical devices move is to use pose sliders.

 

That way I can control the exact range of motion, by rotating the bone in only one direction.

 

In the animation I use the pose sliders to move the robot into position, then open the timeline and make sure all the motions use liner interpolation, to keep them discreet as opposed to creature like motions.

 

You need to choose the view in the timeline by seleting the far left button that looks like a line graph. Left click on one of the CP's, then right click (PC) on the line and select interpolation method, then linear.

 

You can leave some of the curved lines alone if you want a single joint to have some hysterisis (joint over shoot), which may look cool if it's on a single joint, like a weak leg.

 

Here's a screen shot of one of my 6 axis robots with the pose sliders and timeline showing.

 

Hope this helps.

 

d

post-7-1098728489.jpg

Link to comment
Share on other sites

Yes. His waist and neck are "accordioned", like in the sketch. Tonight I may put him in a better context for showing him off.

 

Adding control points to the ear mesh will likely work. It's likely to be very labor intensive though, involving tweaking a lot of gammas to get the curves right. I may just skip trying to make it a mesh...you wouldn't use a mesh anyway if his ears are acoustic. Oh...maybe I could just break some of the intersections? That might work, and might not involve as much tweaking. Even if that works I may not use it, since the render-as-lines seems to look more like ribbon than wire.

 

I think the Robochihuahua will be lots of fun to animate. He'll be the source of most of the action. (I plan to make him "anatomically" correct, so he can do things you would expect the average dog to do... ;) ). It's part of the script I have worked out so far for these two.

 

Bill Gaylord

Link to comment
Share on other sites

Also, do you use the TSM with v 11?. I bought it for v 10 but haven't tried it on v 11.

They now have setup machine 2 for version 11.

 

You can get it cheaper as an existing user or get a free upgrade if you bought version 1 after 1st April 2004. ;)

Link to comment
Share on other sites

Something about him doesn't look chihauha to me, maybe the head is too small in proportion to the body?

 

I'm not sure either. I think the legs might need to be shorter and a tad thicker, and the chest may be a bit large. The head might need to be a little larger compared to the body. Another thing might be the eyes. Chihuahuas tend to have round somewhat bulging eyes. But he is a robochihuahua after all--that involves some compromises. Some tweaks will improve the look, though.

 

I see you were in Atlanta recently. Do you work there or were you just traveling? (I work in Atlanta).Also, do you use the TSM with v 11?. I bought it for v 10 but haven't tried it on v 11.

 

I live in Stone Mountain, GA and work in Atlanta.

 

I have not obtained TSM 2 to use with AM version 11.0 yet, but plan to soon.

 

Bill Gaylord

Link to comment
Share on other sites

Modified the Robochihuahua to look more like a Chihuahua. Reduced the chest size, made his snout smaller, head larger, and eyes smaller, lower and more spread apart to get a more accurate Chihuahua look. Let me know what you think.

 

http://wjgaylord.brinkster.net/RoboChihuahua03.jpghttp://wjgaylord.brinkster.net/Robochihuahua01.jpg

image.jpeg

Bill Gaylord

Edited by robcat2075
missing image restored
Link to comment
Share on other sites

Modified the Robochihuahua to look more like a Chihuahua. Reduced the chest size, made his snout smaller, head larger, and eyes smaller, lower and more spread apart to get a more accurate Chihuahua look. Let me know what you think.

Simple changes have made an amazing difference. It's really coming to life now. :D

Link to comment
Share on other sites

I was wondering if the two projects were related in some way.

 

Actually the tree animation project the brownstone comes from is a separate project. It was just a handy backdrop to use for a more interesting context.

 

Looks great, I like the way you handled the ears.

 

Yah, I think having the patches render with the mesh lines actually looks better than having just a mesh would have looked.

 

Now I have to figure out how best to rig these guys so I can get them moving around! Especially the little guy! :D

 

I plan to make the Robochihuahua somewhat "anatomically correct", as he will be doing distinctly "doggy" things according to the script. I'll try to keep things somewhat subtle so as not to spoil his cuteness. B)

 

Bill Gaylord

Link to comment
Share on other sites

OK...made the little guy a bit more "anatomically correct". He is a dog after all and will be doing typically doggy things during the script. :D

 

http://wjgaylord.brinkster.net/RoboChihuahua04.jpghttp://wjgaylord.brinkster.net/RoboChihuahua05.jpg

image.jpeg

 

Bill Gaylord

Edited by robcat2075
missing image restored
Link to comment
Share on other sites

OK. Now it's time to rig up these guys for animation...

 

The way I limit how my mechanical devices move is to use pose sliders.

 

Have you tried this with a mix of more traditional manipulation? Oddly enough, I don't want mechanical looking (linear) motion so much as just a limitation of joint movement. I want to be able to pose these guys for the most part like I would characters of a more organic ilk. I'll experiment with this technique, though. It might do the trick.

 

Otherwise, does anybody know how to restrict the rotation of one bone relative to another to a single local axis without using a pose slider? Especially in the case of arms, I would like the freedom to manipulate them using both forward and reverse kinematics, without "breaking" the hinge nature of the joints.

 

Thanks,

Bill Gaylord

Link to comment
Share on other sites

Euler, Euler, he's our man! Yes! Euler constraints do exactly what I wanted. Thanks, Luckbat.

 

Are there some simple techniques for precision alignment of bones? Similar to using the "scale" function to align control points along a plane by setting the scale perpendicular to the plane to zero percent? Can you set the rotation of a bone in both global and local coordinates? Guess I should do a bit of homework and experimantation.

 

Bill Gaylord

Link to comment
Share on other sites

You're welcome, William!

 

Now that you have the Euler Limits set, you can optionally configure the manipulator properties of the corresponding bones in your choreography's model shortcut to display the X-rotation manipulator whenever you select the bone. Depending on how you like to work, it could make posing those bones easier, or at least more visual.

 

Check out the image below and give it a shot...

post-7-1099478682.gif

Link to comment
Share on other sites

  • robcat2075 changed the title to GeezerBot
  • Hash Fellow
On 10/23/2004 at 7:29 PM, williamgaylord said:

Dang it! I misspelled GeezerBot on the title. (That's interesting...the spell checker didn't catch that one! ;) ) Oh, well.

 

Fixed, William... wherever you are!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...