HomeSlice

Assuming that "Mario jumping out of the pipe" was animated in "Choreography Action 1". Drag the Run action onto Mario and make sure it is *under* Chor Action 1 in the PWS. In the Run action's "Chor Range -> Start" enter the frame you want him to start running. In the Run action's "Repeat", enter numbers until the "Chor Range -> End" value is near the frame on which you want Mario to stop running. Set the Run action's Blending Mode to "Blend". Go to the frame where Mario starts his run action and set the "Blend Ratio" (_not_ the Ease) to 100%. This effectively turns the Run action off. Go forward in time about half a second and set the Blend Ratio to 0%. Now his movements from shooting out of the pipe in Chor Action 1 will gradually transition over a half second into the Run action.

Largento, what are you using to lay out your tutorials? I noticed that the tutorial is just a big picture. If you are using something like InDesign or Illustrator, or Open Office, you can export it as a PDF file which will preserve your text instead of converting it into a single picture with everything else. This has a couple of benefits. If someone is viewing the tut on a very large monitor, or one with a high resolution, the text may appear fairly small on their screen and they may want to zoom in a bit to read it. With a PDF, the text will scale and will remain crisp when someone zooms the document. When you or someone wants to print the tut, the text will be much more sharp, which is easier to read and gives the impression of higher quality -- all for little or no extra work on your part. If you ever compile all these tuts into a single online booklet, the text in a PDF file is searchable, so it would be easier for people to find what they are looking for. Also, it would be possible to make bookmarks for all the different chapters. I would be happy to convert them for you if you need.

I just watched Episode 4. Great story and dialog so far. I stayed interested throughout. Can't wait for Episode 5! Have you uploaded these to YouTube?

My guess is that you are going to need to create a group in your model containing all the geometry that gets dissolved, then create a gradient material and apply it to the group. In the chor, you will need to animate the translation of the material so the gradient slides up the group until all the appropriate geometry is invisible. You may want to do some testing with gradient materials before you try this. Make a 1000cm x 1000cm sphere. Make a gradient material with Attribute A colored bright green and Atribute B colored red. Apply the material to the sphere. Play with the gradient's Start and End values to see how they affect the sphere.

You aren't supposed to move the entire stride length widget, at least I don't think you are supposed to. Your model should be centered near 0,0,0 in the Model window and the bottom of the feet on your model should rest at 0 along the Y axis (they will appear to be standing on the X axis line in the Model window). Then when you make a new Action with stride length, all you do is move each stride length indicator horizontally to the point where the foot pivots in relation to the leg.

Try setting a keyboard shortcut for "Attach Control Point".

Try this one and see if it works. This is the one I had in my v13 hxt folder. (I keep all my old hxt files in their own folders by AM version) OBJ.zip

I often get these kinds of errors if I apply a displacement material or hair material, then delete the material from the group or model while in shaded mode (displacement material) or while Hair is turned ON [shift-8] (hair material). A quick fix that often works in this case is to switch to wireframe mode and/or turn hair OFF. Then close the model window. Save your model under a different name (mymodel_v2.mdl) - always a good idea nomatter what - then open the model window and switch to shaded mode and/or switch hair display back on. If that doesn't work, close the project and reopen. If that doesn't work, quit and restart AM.

You're going to have to get OS 10.4 or higher. One of the things about Apple is that it changes it's operating system almost every year. Apparently OS 10.4 introduced some core changes that were incompatible with OS 10.3 and earlier. It's just one of the things about being a Mac owner you have to be aware of.

You seem to be acknowledging that our present health care system resembles a communist philosophy. "From each, according to his ability. To each, according to his need." Why the conservative sector (of all people) wants to maintain this is beyond me.

In addition to all the other excellent suggestions, there are also tutorials on: Sprites: http://www.hash.com/forums/index.php?s=&am...st&p=249010 Streaks: http://www.hash.com/forums/index.php?s=&am...st&p=249011 Blobbies: http://www.hash.com/forums/index.php?s=&am...st&p=249004

Ya sure. It's obvious you just took a photograph and drew some lines on it for a "wireframe" look. Nice modeling job

Is he related to Ross Perot? Perhaps a long lost brother?

I've been using this program for about 8 years, almost daily, and I still don't feel like I've mastered every aspect. "Easy to Learn. Hard to Master" - exactly like learning how to draw with a pencil. Thanks George! I'm glad some people find my tutorials useful

LOVE! the products. Where can I get some Drunkin Pumpkin? It think a transparency decal will work. Copy your decal/label and paint the parts you want to see white and the parts you don't want to see black, then apply it to the same geometry as the glass material. Don't forget to change its Type to "Transparency". I just tried it and there is one tricky bit. The black part of the transparency decal will turn the geometry under it 100% transparent. That isn't a problem if you want a 100% transparent bottle, but usually you don't want it totally transparent. I turned the "percent" down on my transparency map to "75%" and it blended perfectly with the rest of the geometry, which had 80% transparency. So I think a Transparency map is the way to go.

That looks really really nice Mark. In addition to the grass, the landscape itself makes me want to look at it. Great job all around.

I've never had AM create the sinfo files but not the regular render. But I know what the sinfo files are. They are used to sync up the sound with the frames or video in the AM NLE editor. The sinfo file allows you to render out TGA, JPEG, or whatever, then import the rendered frames and the sound file (if there was one) and AM will sync up the sound to the frames like it was in the original project files. This way, you can import several different renders into AM's NLE and move them around, crop the ranges etc while keeping the sound in sync with the frames. Then you can render out a Quicktime movie or whatever from all these different renders and have a single movie with all the sounds perfectly in sync.

I understand your rationale. It sure makes sense to me, especially if you can get Photoshop 6 or 7 for cheap on eBay. Experience with some kind of Paint program is essential in creating 3D art. As you are realizing, you eventually get to a point where you just have to buckle down and learn some kind of paint program, whatever it is.

This probably doesn't help you with UT, but there is also an AM exporter for the Torque game engine. I can't remember who wrote it, but you can try a forum search to dig it up.

An alternative is to construct your set in an Action window, instead of in a chor. It is a little more work to do all that in an Action, but the upside is that if you need to change something in the set, you can change it once on the action and all the sets in all your chors are updated automatically. Also, I've found that is is good to do your lighting in a separate action as well. The way you would do that is: Make a base model for the set, whether it is a bare room or a barren landscape. Create an Action for the base model and drag all the extra stuff, furniture, trees etc. into the Action as Action Objects. This action will have keyframes only on frame 0. It is essentially a 1 frame action Drag the base model into a Chor and drag the "set assembly" action onto the base model shortcut in the chor. Important! - Make sure the "chor range" for the action shortcut (in the chor) starts on frame 0 and has "Hold Last Frame" set to ON. A lighting action is made the same way. Create a new action with the base model. Drag lights into the Action as Action Objects. Then drag the lighting action onto the base model shortcut in the chor. If you need to alter some items in an action ONLY for one particular chor, I think you can click on the "show more than drivers" button for the base model shortcut in the chor and all the action objects will show up in the "bones" folder under the base model shortcut. You can move an Action Item around in the chor by selecting the bone that controls it. I'm not 100% sure about this, but I think this will only affect the current chor. It will not change the original Action, so your other chors will be unaffected.

I don't think you are supposed to "open" atx files. When you make a new Material, right-click on the Attribute under the material and choose "change type to -> Plugin" and your atx files will show up in the context menu as various texture plugins. At least that's how I think it works.

I managed to find a full version Photoshop 6 on ebay. http://cgi.ebay.com/ADOBE-PHOTOSHOP-6-0-FU...t=1218670254531 I just noticed it's for Mac. You'll have better luck finding Photoshop CS2 on ebay.

Check out the Hair tutorial. It covers different ways to texture the hair. http://www.hash.com/forums/index.php?showtopic=29738

In addition to Rodney's suggestion, make sure any non-movable models only have keyframes on frame 0. Delete all the other ones. If a model is supposed to move at some point, but you don't want it to slide around between moves, set it's Interpolation Method to "Zero Zlope". You seem to be a good artist. Why don't you just draw the extra buildings and bring each drawing into the chor as a Layer?

Here's the final version. It took 14 days to complete. I might have been able to do it faster if I had worked on it full time, but 14 days for something like this is pretty good for me nonetheless. The dress alone took about 7 days. Whew!