MMZ_TimeLord Posted May 31, 2006 Posted May 31, 2006 So, just for fun and to see how well I could do this... here is my attempted model after only 2 hours work. Still working on getting the green goo to glow and decal of the CCs on the side. Critiques welcome... (Help with the materials too ) [attachmentid=17125] Quote
Hash Fellow robcat2075 Posted May 31, 2006 Hash Fellow Posted May 31, 2006 That's a big syringe. like seven feet high? Quote
dre4mer Posted May 31, 2006 Posted May 31, 2006 nice modeling and stuff, the needle itself is alot bigger than anything I'd want in my arm then again. I pretty much stay as far away as I can from any size needles... nice work! Quote
Jeetman Posted May 31, 2006 Posted May 31, 2006 The syringe looks great but I'd change the setting to possibly a hospital room with the syringe lying on a tray with other medical tools like maybe a scalpel, tweezer, scissors, etc. You also might consider adding more lights to have the syringe stand out a bit more. here's a site I found of possible tools http://images.google.com/imgres?imgurl=htt...GLG:en%26sa%3DN Another cool addition would be the measurements lines on the cylinder. If you used the chrome material for the metal part, you need a few objects and good lighting to make the chrome really show up. One of my early (mechanical) models was of a dumbell weight rack with the dumbells. It's a rack I personally own, so I modeled it matching the material as close to the rack as possible (ie rubber material for the boots, a black metal flake material for the rails, etc). For The bolts I used the chrome material but I found out that it didn't show up in the model window very well. It wasn't until I read that to see chrome, it needs objects and light to reflect (duh). Once I understood this, I finished my rack and dumbells and imported it into the choreography and just with the lighting I saw a major difference. Once I added other objects it was incredible! hope this helps, Jeetman Quote
MMZ_TimeLord Posted May 31, 2006 Author Posted May 31, 2006 Yeah, this is not for a still image, I was just messing around. I plan on putting the numbers (decal) on later. I actually modeled this the correct size, it's the set that was out of scale. I just dropped in the 90sHallWay.mdl from the CD for a quick render. I may add the tray and some other items... again... I just wanted to see how fast I could get the basics for the job that was posted. I'm still new to this whole modeling for dollars thing. Quote
Guest jandals Posted June 1, 2006 Posted June 1, 2006 Gives me the willies just looking at it Are those detatils at the top modeled or mapped? Quote
MMZ_TimeLord Posted June 1, 2006 Author Posted June 1, 2006 I modeled EVERYTHING... Here's a wireframe... [attachmentid=17150] Quote
ddustin Posted June 1, 2006 Posted June 1, 2006 I modeled EVERYTHING... Here's a wireframe... [attachmentid=17150] Nice job... Quote
3DArtZ Posted June 1, 2006 Posted June 1, 2006 Nice. I would have to say however, that the needle is way to big..... if it's a needle that would be stuck into a person..... But reguardless of that horror, the model looks clean and well thougth out. Mike Fitz www.3dartz.com Quote
MMZ_TimeLord Posted June 1, 2006 Author Posted June 1, 2006 If you remember the job description... he was looking for a 'nasty looking' needle to be added to the picture he had provided as a guide. Quote
Dhar Posted June 1, 2006 Posted June 1, 2006 Nice work Jody. I didn't know you were into needles Quote
Karl Posted June 2, 2006 Posted June 2, 2006 MMZ_TimeLord - What you've done looks really good! I sent the check out a couple days ago and should have something sometime in the next week or so from "the winner" - we'll have to see how it compares! Quote
MMZ_TimeLord Posted June 2, 2006 Author Posted June 2, 2006 Thanks Karl... I was doing this as an exercise to see how much I could get done in just a few hours. I'll probably tweak it later, but this was two hours work. I really need an AO 'stage' for stuff like this. I'll play with that in my copious amounts of 'spare' time. Quote
3DArtZ Posted June 4, 2006 Posted June 4, 2006 If you remember the job description... he was looking for a 'nasty looking' needle to be added to the picture he had provided as a guide. Well then, mission accomplished:) nasty! nice work Mike Fitz www.3dartz.com Quote
Karl Posted June 7, 2006 Posted June 7, 2006 John Bigboote was the "winner", here's his fine work: [attachmentid=17295] Thanks Big John! Quote
andyg Posted June 8, 2006 Posted June 8, 2006 [attachmentid=17307]Her is one I made in Version 4 of AM, I think it was the first mechanical thing I ever made... Blimey it was a long time ago (Version 4 how many years ago was that?) Cheers AndyG Quote
case Posted June 11, 2006 Posted June 11, 2006 excellent detail but i can say since i got out of the hospital looking at it gives me pain Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.