Phil Posted January 13, 2014 Posted January 13, 2014 Hi, I'm moving my spline to Zero at the X so I can do a copy/Flip/Attach. I input 0 but it keeps changing. I'm I doing something wrong? Quote
Hash Fellow robcat2075 Posted January 13, 2014 Hash Fellow Posted January 13, 2014 Make a group of that spline. Set the group's pivot point to X=0 Scale the group to 0% on X That's the standard way to do that. Is that what you are doing? Quote
Hash Fellow robcat2075 Posted January 13, 2014 Hash Fellow Posted January 13, 2014 My video on Copy/Flip/Attach can be found here... http://www.hash.com/forums/index.php?s=&am...st&p=371088 Quote
Phil Posted January 14, 2014 Author Posted January 14, 2014 Hi,I'm not having a problem with the process. It works fine, its when I enter "0" it turns to a long mathamatial outcome. ie. 1.969e.005" Quote
Hash Fellow robcat2075 Posted January 14, 2014 Hash Fellow Posted January 14, 2014 hmmm... what version are you using? Quote
Phil Posted January 14, 2014 Author Posted January 14, 2014 hmmm... what version are you using? 17g and 18a on both the 32 and 64 bit Quote
Hash Fellow robcat2075 Posted January 14, 2014 Hash Fellow Posted January 14, 2014 I'd say make a screen cam of it happening and make an A:M report of it. I just get a regular zero when I type a zero, but since you are not... document that and show that it's a real thing and then there's some place for someone to start on figuring out what is wrong. What if you enter 0.0? What if you copy a zero from another field and paste it in? Have you done Reset All Settings? Quote
itsjustme Posted January 14, 2014 Posted January 14, 2014 I asked earlier, but I'll ask again...is Mirror mode on? Quote
higginsdj Posted January 14, 2014 Posted January 14, 2014 With or without Mirror mode on it still works just fine for me (18a on OSX Maverick) Cheers Quote
NancyGormezano Posted January 14, 2014 Posted January 14, 2014 Hi,I'm not having a problem with the process. It works fine, its when I enter "0" it turns to a long mathamatial outcome. ie. 1.969e.005" How are you getting the cp# to display? I suspect you are not selecting the cp in a normal way? I don't get a cp # when I have "show manipulator properties" on and I just select the cp. I only seem to get a CP # right after I do an extrude, and I suspect that those x,y,z values in your display are offsets, and not absolute values for the cp. (That doesn't explain why you are not able to input a zero, but I'm guessing there is some overflow problem. duh) Quote
Phil Posted January 15, 2014 Author Posted January 15, 2014 I just tried it with and without mirror mode same issue. I found that it only happens when units of measurement are set to Feet and Inches. all other selections work fine using centimeters using inches using feet and inches HMmmm Quote
Hash Fellow robcat2075 Posted January 15, 2014 Hash Fellow Posted January 15, 2014 I just tried it with and without mirror mode same issue. I found that it only happens when units of measurement are set to Feet and Inches. all other selections work fine using centimeters using inches using feet and inches HMmmm this doesn't look like you are doing the zero and scale in the properties like in my video. Quote
mtpeak2 Posted January 15, 2014 Posted January 15, 2014 With the manipulator properties panel open, select both cps turn on the scale manipulator. In the manipulator properties panel, set the X pivot to 0 then set the X scale to 0. You need to use the scale manipulator for it to work properly. The pivots only show when a manipulator is being used. Quote
Phil Posted January 15, 2014 Author Posted January 15, 2014 As I posted earlier. It works fine. Just when you select the first point using feet and inches as the unit of measurement is when the issue happens. ok I'll just use inches Thanks Quote
Hash Fellow robcat2075 Posted January 15, 2014 Hash Fellow Posted January 15, 2014 A:M will really work best in cm. i don't think any of the plugins will use anything but cm. Quote
NancyGormezano Posted January 15, 2014 Posted January 15, 2014 How are you getting the cp# to display? I suspect you are not selecting the cp in a normal way? I don't get a cp # when I have "show manipulator properties" on and I just select the cp. Hi Nancy, The reason you don't get the cp # in the manipulator property box is because you are selecting the cp by dragging or lassoing around the cp in the model window. If you just click on the cp, you will get the cp #, and the x,y,z values will be the absolute coordinates of the cp (as opposed to being an offset from group pivot when selecting the other way) Hope that helps. Cheers! Nancy Quote
Admin Rodney Posted January 15, 2014 Admin Posted January 15, 2014 Nancy... you had me thinking someone had hacked into your post. Took me a few moments to clear my head. (The "Hope that helps" line had me considering a cross post by David (itsjusthim) Simmons) Now if we can just get you to keep replying to your replies... that will be entertainment. P.S. Thanks for the insight into selecting CPs! Quote
Hash Fellow robcat2075 Posted January 15, 2014 Hash Fellow Posted January 15, 2014 I have trouble discerning between the good twin and the evil twin. Quote
NancyGormezano Posted January 15, 2014 Posted January 15, 2014 How are you getting the cp# to display? I suspect you are not selecting the cp in a normal way? I don't get a cp # when I have "show manipulator properties" on and I just select the cp. Hi Nancy, The reason you don't get the cp # in the manipulator property box is because you are selecting the cp by dragging or lassoing around the cp in the model window. If you just click on the cp, you will get the cp #, and the x,y,z values will be the absolute coordinates of the cp (as opposed to being an offset from group pivot when selecting the other way) Hope that helps. Cheers! Nancy Silly me! That helped! Thanks! Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.