largento Posted December 25, 2018 Share Posted December 25, 2018 On the side, I've been playing with the idea of making a 3D printed Flemm action figure. This was my first test head. The challenge was to try to keep it as a single, closed model. It will mean some details will be added with paint, but to give an idea of the difference, this head is 353 patches and the original was 1273. I exported it out as an OBJ file, but Shapeways wasn't too keen on that or the STL I exported. I ended up opening the OBJ in a 3rd party app and converting it to a DAE file, which Shapeways was perfectly happy with. I ordered one just to see what the quality will be and it should be here soon. It was processed and printed fairly quickly, but the holidays seems to be interfering with the shipping. Here's an idea of what it would look like when it's painted: Quote Link to comment Share on other sites More sharing options...
itsjustme Posted December 25, 2018 Share Posted December 25, 2018 Cool! I'm curious to see the results and costs. Quote Link to comment Share on other sites More sharing options...
Fuchur Posted December 25, 2018 Share Posted December 25, 2018 Try the "free" software netfab basic if you want to check on your STL. Best regards *Fuchur* Quote Link to comment Share on other sites More sharing options...
fae_alba Posted December 25, 2018 Share Posted December 25, 2018 3 hours ago, Fuchur said: Try the "free" software netfab basic if you want to check on your STL. Best regards *Fuchur* I use netfab all the time. Works fairly well with a:m stl exports, but I find reversed normals are a real issue with 3d printers. Mark, if your like, I can run thru my 3d,printer to get a comparison. Quote Link to comment Share on other sites More sharing options...
largento Posted December 26, 2018 Author Share Posted December 26, 2018 Unfortunately, there's no Mac version of Netfabb. There was an older version, but they don't offer it anymore. Shapeways recommends a free app called Meshmixer, which I just downloaded. They also recommend a site: www.makeprintable.com which charges you per model repaired. I may take you up on that, Paul. See if there's any difference. At some point, I'm wanting to get my own 3D printer, but I'm just dipping my toe in at this point. Quote Link to comment Share on other sites More sharing options...
fae_alba Posted December 26, 2018 Share Posted December 26, 2018 11 hours ago, largento said: Unfortunately, there's no Mac version of Netfabb. There was an older version, but they don't offer it anymore. Shapeways recommends a free app called Meshmixer, which I just downloaded. They also recommend a site: www.makeprintable.com which charges you per model repaired. I may take you up on that, Paul. See if there's any difference. At some point, I'm wanting to get my own 3D printer, but I'm just dipping my toe in at this point. Send it on over. This gov't shutdown deal has me sitting around with nothing to do, so I might as well do some 3d printing! Quote Link to comment Share on other sites More sharing options...
largento Posted December 26, 2018 Author Share Posted December 26, 2018 Check your messages, Paul! Thanks! Quote Link to comment Share on other sites More sharing options...
fae_alba Posted December 28, 2018 Share Posted December 28, 2018 Ok, I've printed this with PLA filament , on a "fine" setting, at two different sizes. The small one is 1 in high, the other is 2.5 inches. I also did a quick test with white ABS filament, but since I don't have my printer tented it didn't fair so well. But, the PLA prints look pretty good. They would need some cleanup, a bit of sanding then hit with a primer/filler spray paint. If you want them, send me a message with your snail mail address and i will send them along to you. 2 Quote Link to comment Share on other sites More sharing options...
largento Posted December 29, 2018 Author Share Posted December 29, 2018 Neat! I definitely would like to check them out. I'll send you my my address! Quote Link to comment Share on other sites More sharing options...
largento Posted January 1, 2019 Author Share Posted January 1, 2019 Got my print from Shapeways today (well, it came yesterday, but nobody checked the mail.) It looks pretty good. The details appear sharper in real life, but it is a tiny bit "chalky." Not sure when I'll have the time to attempt painting it, but it probably won't be for a couple of months. Still, it's pretty neat to hold a model in your hand and see it in reality. Quote Link to comment Share on other sites More sharing options...
Hash Fellow robcat2075 Posted January 2, 2019 Hash Fellow Share Posted January 2, 2019 What is that made out of? It looks more granular than I imagined. Quote Link to comment Share on other sites More sharing options...
fae_alba Posted January 2, 2019 Share Posted January 2, 2019 13 hours ago, robcat2075 said: What is that made out of? It looks more granular than I imagined. Looks like abs plastic. It's pretty much the way the one in I printed in abs looks. Quote Link to comment Share on other sites More sharing options...
largento Posted January 2, 2019 Author Share Posted January 2, 2019 I went with their most affordable option, which does have "a slightly textured surface and a matte finish." It is less than an inch tall, so it's not really as noticeable to the naked eye. They offer a "premium" finish that is semi-glossy and scratch resistant. Quote Link to comment Share on other sites More sharing options...
fae_alba Posted January 7, 2019 Share Posted January 7, 2019 I'm putting your samples into the mail today/tomorrow. Been a little chaotic with the fed shutdown and my schedule (one minute I can work, the next I can't!). 3D printing isn't going to provide a perfect surface each time. There will always be some level of finishing to do. I use a spray paint primer-filler to do most of the work, then liberal sanding. I always figured if I were printing something to "mass-produce" then I would be spending time getting the surface finish up to snuff, then making a silicon mold and casting in resin. Quote Link to comment Share on other sites More sharing options...
largento Posted January 8, 2019 Author Share Posted January 8, 2019 No rush, Paul. I'm not going to have the real time to focus on this until the summer. I'm only intending on printing two (one for me and one for McCrary). Quote Link to comment Share on other sites More sharing options...
Hash Fellow robcat2075 Posted January 8, 2019 Hash Fellow Share Posted January 8, 2019 I think you should print a life-size one that you hide the button for the secret lair in. Quote Link to comment Share on other sites More sharing options...
largento Posted January 8, 2019 Author Share Posted January 8, 2019 I should probably be at a point where I have a secret lair first. 🙂 Mostly, this action figure project is just for fun, but the "big one" I'd go for is to remodel Flemm's ship, the Sea Anemone, to be printed at the same scale as the action figure. That would be super cool. Quote Link to comment Share on other sites More sharing options...
fae_alba Posted January 9, 2019 Share Posted January 9, 2019 16 hours ago, largento said: I should probably be at a point where I have a secret lair first. 🙂 Mostly, this action figure project is just for fun, but the "big one" I'd go for is to remodel Flemm's ship, the Sea Anemone, to be printed at the same scale as the action figure. That would be super cool. Much like a maquette. I have several of those of Papa Bear sitting on my desk now. Flemm's ship would be cool, but you'd have to break it down to it's components then assemble like a model. Would be a fun project. Quote Link to comment Share on other sites More sharing options...
largento Posted January 9, 2019 Author Share Posted January 9, 2019 No doubt. The ship would probably be more than 2 feet long! It would all have to be remodeled not only for that reason, but also because most of it has no depth. I could make the sails out of cloth, though and use string for the rigging. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.