pixelplucker Posted December 5, 2011 Share Posted December 5, 2011 This uses the Microsoft Xbox 360 Kinnect. http://davidleonardtv.wordpress.com/2011/0...rial-with-code/ Any ambitious programmers with some free time could make a plug-in for the new AM that has retopo tools. Be pretty convenient to scan in an object into the model window. Maybe even capture the surface colors for reference bitmap as well. Quote Link to comment Share on other sites More sharing options...
Darkwing Posted December 5, 2011 Share Posted December 5, 2011 We've actually been using kinect some fro Red Squad. Currently we've only had an opportunity to briefly play with the motion capture abilities, however, there is definite potential. The problem that needed to be worked out was jittering in the recording phase, however the AM model fit quite well with the BVH that kinect exported. Of course we havn;t done anything like what you suggested above, that's somewhat out of our league Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 6, 2011 Share Posted December 6, 2011 Just got my 2 kenect cameras in the mail. Cant wait to use them with the software. Quote Link to comment Share on other sites More sharing options...
Darkwing Posted December 6, 2011 Share Posted December 6, 2011 I look forward to your results as well, could help expedite experimentation on our part Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 6, 2011 Share Posted December 6, 2011 Ill try to post or make a tutorial on what I learn. Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 6, 2011 Share Posted December 6, 2011 only $99 for 1 kenect camera with this link http://www.microsoftstore.com/store/msstor...uctID.238381700 Quote Link to comment Share on other sites More sharing options...
John Bigboote Posted December 6, 2011 Share Posted December 6, 2011 Jason- are you using Mr. Bones software? Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 6, 2011 Share Posted December 6, 2011 I am going to Download the ipi software. Mr.Bones said we could do a skype screen share and he would walk me though the process. He is a nice guy. Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 6, 2011 Share Posted December 6, 2011 What am I saying. You and him live not far from each other and have met. Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 15, 2011 Share Posted December 15, 2011 So I finally got everything in the mail. I cant seem to get both cameras working at the same time in ipi recorder. both cameras work just not at the same time. Bummer. I hate Windows. I used to be a hard core PC guy. Now I love mac. My biggest gripe with PC is things like this. Everything is always theoretical. In theory if I get all this stuff and install this software it should work. On a mac. It just works. I remember others trying to sell me on mac. WHat finally made me switch was was people who were not half as technical as me were getting results on mac and I was like did you do this? Did you have to customize your bios, Go into device drivers, get that special capture card? They said no I just bought the mac and plugged in my camera. Sorry about my rant. This always seems to be the case with when microsoft is involed. Quote Link to comment Share on other sites More sharing options...
pixelplucker Posted December 15, 2011 Author Share Posted December 15, 2011 Doesn't sound like an os problem but rather a driver problem where it only loads one device. Similar devices on windows should show up as individual devices under the device manager such as the case as multiple scanners, cameras, mice etc. What driver are you using? Is there another you could use? Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 16, 2011 Share Posted December 16, 2011 There semas to be something wrong with my usb drivers. Quote Link to comment Share on other sites More sharing options...
pixelplucker Posted December 16, 2011 Author Share Posted December 16, 2011 That's what I was thinking, under the device manager you should see 2 devices of the same type and one probably has a triangle with the ! inside. That would indicate an unknown device because of a missing driver. What drivers are you using? I don't have a kinect on my machine yet but really thinking of it. Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 17, 2011 Share Posted December 17, 2011 Finally got everything working. One of the rules is that both cameras can not be plugged into the same usb controller. My mac pro has 8 usb ports all driven by 1 controller. So no go on the mac pro. I used my other system which did have more than 1 controller built into the mother board. Attached is my very first mocap. I am extremely impressed. I have the cameras 28 feet away from each other which is too far and they are at the non optimal angles and yet I got this amazing result my first try. This is truly powerful. See attached. You can view it in BVH hacker which is free. Go ahead and have it drive your humanoid model. I am extremely impressed with how smooth it is. No jitter at all. Almost all the True bones motions I purchased had lots of jitter. I wonder if I can run them through ipi to remove the jitter? Well I guess there is no point because I can simple create the move myself as the actor. I wonder if this is a viable revenue stream? Freeze_Your_Surounded_.bvh.zip Quote Link to comment Share on other sites More sharing options...
pixelplucker Posted December 17, 2011 Author Share Posted December 17, 2011 Thats pretty cool, I suppose the Kinect units probably don't have unique hardware id's so they show as the same. I think this would explain why the need for a separate usb controller for each one. Did you try it for 3d scanning? If so I can convert the point clouds to an stl or obj for you. Curious how the details are held. Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 18, 2011 Share Posted December 18, 2011 "Did you try it for 3d scanning? If so I can convert the point clouds to an stl or obj for you. Curious how the details are held." I would not know where to start Quote Link to comment Share on other sites More sharing options...
Fuchur Posted December 18, 2011 Share Posted December 18, 2011 That's what I was thinking, under the device manager you should see 2 devices of the same type and one probably has a triangle with the ! inside. That would indicate an unknown device because of a missing driver. What drivers are you using? I don't have a kinect on my machine yet but really thinking of it. Microsoft plans to introduce a real computer-version of the Kinect in the first Quater of 2012. It will not be limited to a recording-distance of 1-1,5m but will be useable from 40 cm on (or something like that...). I will wait till this comes out. See you *Fuchur* Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 19, 2011 Share Posted December 19, 2011 Your surrounded render. I am impressed that I was able to do this with no markers. As you can see the motion is extremely smooth. Your_surounded_.mov Quote Link to comment Share on other sites More sharing options...
Hash Fellow robcat2075 Posted December 19, 2011 Hash Fellow Share Posted December 19, 2011 During the trailers at the movies yesterday there was a commercial showing people doing absolutely amazing, mind-blowing, incredible things with Kinnect. Then i noticed the small disclaimer at the bottom, "Depictions are visionary" Quote Link to comment Share on other sites More sharing options...
jason1025 Posted December 19, 2011 Share Posted December 19, 2011 I don't understand what they mean by that. Is it as simple as they were fake? Or was it a play on words? Quote Link to comment Share on other sites More sharing options...
Admin Rodney Posted December 19, 2011 Admin Share Posted December 19, 2011 Looks like too much fun. I'm glad to see you guys are on the cutting edge. Quote Link to comment Share on other sites More sharing options...
Hash Fellow robcat2075 Posted December 19, 2011 Hash Fellow Share Posted December 19, 2011 I don't understand what they mean by that. Is it as simple as they were fake? Yes, they were fake. The stuff they were showing was impossible. Today, anyway. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.