the_black_mage Posted December 5, 2006 Share Posted December 5, 2006 Ok I'm working on an A:M version of the required setup of cgsphere.com but i can't get it right heres what i mean. [attachmentid=22932] this is what i have now. [attachmentid=22933] this is what i need, witch is also mixed in with the render to show the difference. the guy who made cg sphere wants it a minimum of 95% close, can any one help me. [attachmentid=22934] cg_sphere.zip Quote Link to comment Share on other sites More sharing options...
Shazam3D Posted December 5, 2006 Share Posted December 5, 2006 Here is the camera's setup in 3ds max, may be help to fix your scene: Camera: lens=48, FOV=41,112 far range: 1000 DOF: 160 focal depth:100 Good luck Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 5, 2006 Author Share Posted December 5, 2006 is that in centimeters or....... and what us fov...field of view? Quote Link to comment Share on other sites More sharing options...
Fuchur Posted December 5, 2006 Share Posted December 5, 2006 Okay... I had a look at it... I think it is a bit nearer to the template: Basicly I used a projection-map (spherical of course) with a bitmap and I used z-shadows to get a more blurred shadow. I cant figure out, why your "ground" doesnt seem to be textured right... here it seems to be okay. *Fuchur* -> Get the projectfile Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 5, 2006 Author Share Posted December 5, 2006 its perfect!!!!!!!!!! [attachmentid=22936] the template is fused with the render, note the layers shadow. also, fuchur i think your version is higher than mine, mines is version 12. Quote Link to comment Share on other sites More sharing options...
Fuchur Posted December 6, 2006 Share Posted December 6, 2006 Yes it is made with v13, newest version available... Were you able to open the file? *Fuchur* Quote Link to comment Share on other sites More sharing options...
Chad_Hunt Posted December 6, 2006 Share Posted December 6, 2006 i got it open but your grid is streched on the plane, I started to make the temp and got good results but my wife miss carried our first baby so time have been hard here. I will see what I can do here getting that corrected. Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 7, 2006 Author Share Posted December 7, 2006 i little to much info.....but i e-mail the image to him if he says its ok this post will be done, so no need to keep at it right now. take time for you wife Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 7, 2006 Author Share Posted December 7, 2006 unfortunately he not ok with it yet, all i need to do is lower the hight of the decal. it should be done soon (as in hours mabe). Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 8, 2006 Author Share Posted December 8, 2006 you know what i just realised, there are so many versions of A:M and newer verstion down't work with older ones, were gonna need versions for the older A:Ms right? Quote Link to comment Share on other sites More sharing options...
case Posted December 8, 2006 Share Posted December 8, 2006 LISTEN probly if you wat to keep working with old ones mage as in go back and forth working with both then yes! THE ONE THE ONLY CONNOR CASE! Quote Link to comment Share on other sites More sharing options...
Fuchur Posted December 8, 2006 Share Posted December 8, 2006 unfortunately he not ok with it yet, all i need to do is lower the hight of the decal. it should be done soon (as in hours mabe). You just have to adjust the "repeat"-value of your projection-map. That should be okay for you too. *Fuchur* Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 9, 2006 Author Share Posted December 9, 2006 well i only have v11-12 no less... Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 9, 2006 Author Share Posted December 9, 2006 hmmmm, i can't figure it out, i have no idea whats wrong with the grid.... the plane is perfect(imported as an obj, only the sphere was changed). but notice how one of the lines is in place and others seem not to match.... perfaps it might be better if some one else did it..... AM_CGsphere.zip Quote Link to comment Share on other sites More sharing options...
cfree68f Posted December 9, 2006 Share Posted December 9, 2006 Hey Mage.. try this.. it'll get it perfect and he'll never know. See if you can get a hirez shot of just the background grid. Then use that as your camera rotoscope (ie. backdrop. Then set up a plane as a reciever for the front projection and voila.. you'll get shadows and the background grid will be perfect. C Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 9, 2006 Author Share Posted December 9, 2006 yeah but it has to be accessible to others, some people put objects other than spheres on the plane. Quote Link to comment Share on other sites More sharing options...
cfree68f Posted December 9, 2006 Share Posted December 9, 2006 the way I said will allow any object on the plane. It should be accessible to anyone using any version of AM. C Quote Link to comment Share on other sites More sharing options...
case Posted December 10, 2006 Share Posted December 10, 2006 BLACK IM IN NEED OF YOUR HELP my version of version 12 (Sorserez) is messed up bad! and i need it can you send the file of your to me plz! THANKS BLACK CONNOR112CASE@AOL.COM Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 10, 2006 Author Share Posted December 10, 2006 ok....wait a mintue...what? Quote Link to comment Share on other sites More sharing options...
case Posted December 11, 2006 Share Posted December 11, 2006 u have v12.0 correct -if you do can you send me it -and Q#2 what type of cd do you have have?(EX.YETI ect.) Quote Link to comment Share on other sites More sharing options...
the_black_mage Posted December 11, 2006 Author Share Posted December 11, 2006 oh ok i'll send it.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.