jakerupert Posted October 8, 2008 Share Posted October 8, 2008 Copyflipped/attachted this modelhalf here, fixed the hooks and expected the mirrormode to work but nothing. What can I possibly be missing here? SimpleRigMan15H_130808.mdl SimpleRigMan15D_130808.mdl Quote Link to comment Share on other sites More sharing options...
KenH Posted October 8, 2008 Share Posted October 8, 2008 What didn't work about it? Looks flipped ok to me. Quote Link to comment Share on other sites More sharing options...
Luuk Steitner Posted October 8, 2008 Share Posted October 8, 2008 It could be your mirror mode tolerance is set too low. Go to Tools->Options->Modeling and adjust the tolerance setting. That should make it work. Quote Link to comment Share on other sites More sharing options...
jakerupert Posted October 8, 2008 Author Share Posted October 8, 2008 ...I activate mirrormode and pull one cp on the right but no coresspondent move on the left. Quote Link to comment Share on other sites More sharing options...
Luuk Steitner Posted October 8, 2008 Share Posted October 8, 2008 ...I activate mirrormode and pull one cp on the right but no coresspondent move on the left. Increasing the mirror mode tolerance should fix this. Did you try it? Quote Link to comment Share on other sites More sharing options...
KenH Posted October 8, 2008 Share Posted October 8, 2008 Ah. The centerline isn't on the y-axis. All cps on the center line must have zero in the y setting. Edit: Correction. The X value should be set to zero. Quote Link to comment Share on other sites More sharing options...
jakerupert Posted October 8, 2008 Author Share Posted October 8, 2008 What I did, I activate the centerspline and scaled x= 0 That normaly worked. Well back to the drawingboard lets check that y thing. Quote Link to comment Share on other sites More sharing options...
jakerupert Posted October 8, 2008 Author Share Posted October 8, 2008 Well, Thanks Ken, now it worked. Don`t know, why this scale-method did´t work before. Maybe because I had crossed the y-line? Is there something special to attend with the hanging hooks or is it o.k. to just fix them by hand? Quote Link to comment Share on other sites More sharing options...
KenH Posted October 8, 2008 Share Posted October 8, 2008 Which hooks? Hooks beside the centreline tend to get confused and join to the centreline after a flip. There's no work around for it except to re-do them after. Quote Link to comment Share on other sites More sharing options...
Luuk Steitner Posted October 9, 2008 Share Posted October 9, 2008 What I did, I activate the centerspline and scaled x= 0 That normaly worked. That works if you set the pivot X to zero first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.