Modeler needed

[jason1025]

requirements:

 

a: Modeller, I have a large portion of the work done already. Looking for a seasoned modeler to handle the more complicated modeling of the spring loaded locking mechanism. Will provide drawings

b:. mechanical

c: Approximate time frames (how soon do you need the help, how long might it last) ASAP a week, depends on how fast you are.

 

Email me jason AT GlossyCUBE dot com

 

 

 

Pay a 5 year supply of the product and 2 3D printed Cube Wall mounts.

 

The part you will be working on is a cube shaped wall mount. Relatively simple. This part will be 3D printed for customers.

 

The Actual product inside the wall mounted cube will be a tube of specially formulated biodegradable wipes.

 

The cube is intended to be mounted in your bathroom. The wipes will kill bacteria on your smart phone, laptop, or tablet without damaging the organic Anti Reflective coating on the screen.

 

Each tube will hold a one month supply for 1 person.

[jason1025]

Hi Everyone Will and another person not sure who they are have offered to help. Will is not interested in using AM. Thats fine. And I plan to use his work but it got me thinking. Does anyone want to try to make this in AM?

 

Its a great way to show off and Test V18

 

I will give you a free 2 year supply of the products.

 

Please watch the videos BOTH videos very important.

 

All you need is attached and in the videos.

 

If I get 10 people who make something wonderful thats great I owe all of you a 2 year supply.

 

Also maybe if we have 3- 5 people playing with this project we can divide the tasks.

 

Attached are scans of the tube.

 

Attached is the project with models.

 

 

What I need in no particular order, each person could work on one of these.

 

 

model in Notch for the blue lid living hinge

model in Ledge so it seats properly where the 2 sides meat

make hinge flush

model in bowl shaped seat for tube to rest in.

Cool looking, robust and functional Latch on both left and right side to lock the door shut. Not too fancy Make it functional. refer to videos

3 holes in back for screws

0.5mm indentation for sticker 3m strips

Classy sleek looking lip for top of cube where tube presses

 

 

Notes:

 

Please do not change the basic workings or sizing of the hinge other than to make it flush and look classy with the sides. I have done a bunch of tests with the 3d printing to get the print and structural integrity right.

Normals must always be facing correctly, please model with showing back facing ploys off.

If you have a better idea about something, I grant you creative freedom. The best ideas should always come first.

As you can see much of my splining is crap except for the hinge. If you need to respline be my guest. Unfortunately any modeling , splining anomalies are only exacerbated in the printing process. This means if there is any weirdness in the AM model the print will be bad. Look closely at hooks, if a hook has a weirdness to it it will not print.

 

 

Download link to instructional videos. Please watch both.

 

https://dl.dropboxusercontent.com/u/55690764/will_.mov

 

 

http://db.tt/jqlKjqCf

hingeV2_24.prj

[jason1025]

Ok

 

All I want is for you to take the top half circles and make them perfectly round.

 

I made this model myself only because I am impatient. Thank you to the people that offered to help you can join in this too if you wish. I am really looking for speed on this

 

I will send a check or Paypal $25.00 plus a print of the model and a 1 month supply of the smart phone, tablet cleaning wipes.

 

 

I need all the rings at the top to be perfectly round. Do what ever you have to do. Just remember the dimensions really need to stay close to what they are to properly hug the tube which goes inside.

 

 

I will pay the 25 immediately when you send me the model. First come first serve.

 

If you can make it pretty close to "looking perfect" again just ALL the top rim half circles, than go for it.

 

I feel to do it right you will need to delete the ones I have and re extrude then reassemble using the original as a guide.

hingeV2_67.prj

[ptiversen]

Jason, that design will probably have a lot of stress on the the half that needs to be snapped to the back half that is mounted to the wall. I believe that if the cube was made the same way as the cylinder then it would be more stable on the wall than the current model. The cube should be refilled from the top. To mount it you should make 3 holes in the back with slots to slide the cube to the wall. His original cube had a great locking latch and that should be incorporated in the top part of the cube.

[jason1025]

Jason, that design will probably have a lot of stress on the the half that needs to be snapped to the back half that is mounted to the wall. I believe that if the cube was made the same way as the cylinder then it would be more stable on the wall than the current model. The cube should be refilled from the top. To mount it you should make 3 holes in the back with slots to slide the cube to the wall. His original cube had a great locking latch and that should be incorporated in the top part of the cube.

 

 

Thanks for these advice. I have a finished product now that I am happy with.