Jump to content
Hash, Inc. Forums

Why is faster slower?


robcat2075

Recommended Posts

  • Hash Fellow

I ran the A:M three teapots benchmark on my Core 2 Quad Q6600 machine.

At the stock speed of 2.4GHz it takes about 5:10 per frame

I have a utility to overclock the CPU.

At 2.8GHz it takes about 4:14 per frame, which is about 20% improvement for only a 16% increase in speed.

But at 3.0GHz the time goes up to 4:40 per frame.

So what goes wrong at that higher speed?

Link to comment
Share on other sites

How hot is your CPU/GPU/Mainboard?

It might be that at a higher clock speed some other component on your computer is getting hotter and that might be bad for it.
(only guessing here of cause)

You could test it by opening your case and trying it again.

Best regards
*Fuchur*

Link to comment
Share on other sites

  • Hash Fellow

The case was already open but I tried it again and got better results.

This time at 3.0Ghz i got 3:55 per frame. I don't know why it is different.

GHz.JPG

 

The CPU temp peaked out at 42° C which doesn't seem too bad.

Link to comment
Share on other sites

  • Hash Fellow
1 hour ago, Fuchur said:

42 °C is totally fine even pretty good.
Are there other sensors on your board like Motherboard, DIMM, etc?
But it is not that common to be a problem if your CPU is that nice.

There was also a "System" temp displayed but that was always within a degree or two of the CPU temp.

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...