Jump to content
Hash, Inc. Forums

Roger

*A:M User*
  • Posts

    1,958
  • Joined

  • Last visited

  • Days Won

    35

Everything posted by Roger

  1. And what can you do to avoid it? I've noticed that in a lot of models that I build, I am getting these problems and I am not sure what I could be doing better to avoid it. I don't think I am doing anything strange as I am building these models, but maybe there is something that I am doing that I am not realizing. Seems to me like I'd have to do a screen capture of one of my work sessions for anyone to be able to tell where I am screwing up. I am probably going to try and do the giraffe tutorial, maybe that will shed some light, however----I was making good progress and would possibly like to have a finished dragon model at the end of the day. help........ Roger For instance, why the heck does this happen? I'm trying to model this foot, maybe not doing it the best way but I decided to delete a bunch of geometry and start over. Well.......I started with all the splines at the end not being closed off, then I started closing them. Instead of getting a nice squared off spline, like I have in the other areas, I get this curved goofiness, where I have multiple splines passing through the same cp (or I would if I started to close off the other open areas). [attachmentid=18408]
  2. Ok, I tried fixing it the way you showed........but I think I made it worse. It was easy enough to delete the bad splines and start creating new ones, however, sometimes the new splines I create look all funky, other times they are curved nice. I know this can sometimes be fixed w/ gamma and bias but I really don't know which to apply and when, its sort of like voodoo for me. I had to create another patch inside the one large 5 pt patch that is created by making the modifications you suggested, for some reason it just would not render closed. I think I may go back to the old version I had, its not quite that noticeable. I would have liked to have fixed it, maybe there is still something I am doing wrong. I have posted pics of the problems I had. [attachmentid=18404][attachmentid=18406]
  3. The anemone looks good, although you should stick w/ the thicker tentacles w/ the tapered tip. There are anemones with thinner tentacles, but they don't look quite like that. The lionfish is pretty good, however the fins are generally longer. There is a Dr. Axelrod's (I think that's the name ) marine atlas which you should be able to get from a library. However.......there are several different types of lionfish, but it looks like you are trying to model one of the volitans lions, which have the longer fins. Looks good though.
  4. Hmmm ok well I guess I will have to break some splines and see if I can't fix that. and yes Eric I will be adding a tail There's a tail stump but I haven't bothered extruding it yet since that will be the last step after I finish modelling the feet, attaching them, and modelling the head and attaching it and then welding the 2 halves of the body together. I should have a complete model within 2 days, I hope. Thanks guys Roger
  5. post a wireframe that shows that area. It might just be my imagination. Ok, well, here it is.........[attachmentid=18375][attachmentid=18376]
  6. Well the indentation of hand to arm is easily fixed...........how would you deal w/ the other thing? Roger
  7. Ok, I seem to have munged up the cp's by the base of the arm/ armpit a bit, but other than that things look ok. I'm pretty happy with the way that I managed to get the hand attached. I think it turned out best. All I have left to attach is the foot and the head, and now that I think I have the hang of things I may change the head slightly. [attachmentid=18354]
  8. Ok, I did a pretty good job of attaching the hand, I need to attach the arm now and so I have to make a hole for it. This is my least favorite part as I have a good chance of screwing up the geometry I already have. I have taken 2 screenshots, one for reference of the way the arm is now, and another with blue lines and dots where I think the new splines and cp's should go. Do you think I am pretty much right on the money, or would you do it differenty? Roger[attachmentid=18351][attachmentid=18352]
  9. Ok, I tried extruding the last ring, I get a new ring etc. But when I try to delete that ring, it doesn't leave any splines behind it just deletes the ring as well as the new patches that were extruded. Am I doing something wrong? Roger Ok, I tried extruding the last ring, I get a new ring etc. But when I try to delete that ring, it doesn't leave any splines behind it just deletes the ring as well as the new patches that were extruded. Am I doing something wrong? Roger Nevermind, I figured out what I was doing wrong. Thanks again.
  10. OK well I answered my own question here----was fumbling around looking for the support number under the Help menu and found Reset Settings, which is what I was looking for in the first place. Anyway, just in case someone else was wondering, that's what it is.
  11. doh.... Thanks pwknox. That made things a lot more clear, and should keep me from having to play "whack a mole" with trying to patch holes that keep popping up. I'm going to try that now. I will probably still do the giraffe tutorial, after I reinstall AM ( not the best way of resetting the tools>options settings, but the only way I could find that would work) I would have wasted all day though trying to do it the way I was going to do it. thanks again Roger
  12. Hello I seem to have screwed something up.......I started working on the giraffe tutorial, since I thought that might be beneficial since I still have some problems with modelling. I wanted to change the units for the grid, so I could follow along properly, from cm to ft. However, after I did that, the grid disappeared even though I have "display grid" checked. I had changed the grid spacing from .16cm to 1foot, I wouldn't have thought that would have made it disappear. I probably did something wrong, what I want to know is is there anyway to get the default settings back? Roger
  13. Hello, I'm getting to the point where I am finalizing the construction of this dragon model, and I have to attach a hand, where the hand has 12 pts at its beginning, and the stump of the wrist has 8, I believe. This has always been the most difficult part for me....I generally try to model parts separately, and then attach them later, as that has always been the way that has worked best for me in the past. However, due to AM being different from polygon modellers, it doesn't seem to make sense to do that anymore. When I am trying to join to parts with disparate numbers of points, the simple solution is to make sure that each end has the same number of points and then connect them up. However, when I start adding points to a piece of geometry that has fewer points, I always end up screwing up the underlying geometry to the point where I no longer have valid patches, and it turns into a nightmare trying to get back to having valid surfaces. Sometimes I can do it, sometimes I can't, and even when I can it doesn't seem to look quite right. So, when building a character, do you guys generally model the whole thing all in the same project, or split it up? I imagine I could do that, by grouping splines and then hiding the groups that I don't need, so I can concentrate on the particular piece I'm on. The biggest difficulty that I still seem to have with spline modelling is that sometimes my splines seem to do wierd things, and there doesn't seem to be any rhyme or reason why. Like, when I am inserting additional splines to "patch up" (pun not intended) a hole that has opened up, sometimes they appear to loop back on themselves, other times I get these wierd "waves" or distortions. I don't often seem to have these neat, orderly grids that all of the really good modellers seem to have. I will post a picture of the wireframe of the foot I am working on right now, to illustrate what I am talking about. I got everything closed off fine this time, but it just looks odd in wireframe, and has a few artifacts in shaded mode. thanks Roger
  14. OK.... after some fiddling around and help from the hair forum, I now have.... Chia cave! Its not *quite* what I wanted, but its close. I can always refine things later on. What do you think??[attachmentid=18260]
  15. Thanks. Will do. Roger Huh....I didn't realize this was possible. I guess this is what I will have to do then. Probably not worth bringing to Martin's attention, but it would be nice if it was integrated. Roger
  16. BTW if anyone is interested in the solution, I can post it, or PM me and I can send it to you. I felt that it is more clear than what is in the help file. Roger
  17. I also posted this in the hair forum, but I think it might get more response here: Ok.... I was trying to follow the tutorial for creating grass that I found on the ARM...... but I don't seem to have gotten anywhere. I selected the area of my cave that I wanted to have grass....then I flipped the normals on that area. I created a particle system hair material, adjusted the parameters according to what was in the tutorial, did a test render....... and nothing but naked cave. What did I do wrong?? Roger
  18. I suppose that is a possibility, I'll keep futzing with it. Just now I posted a rough draft of the main character, I just sort of faked things by putting them close enough together. Of course I wil have to change that in order to be able to animate him. Ok I have the copy flip attach issue sorted thanks to Eric2575..... thanks to everyone else that chipped in. Roger
  19. I suppose that is a possibility, I'll keep futzing with it. Just now I posted a rough draft of the main character, I just sort of faked things by putting them close enough together. Of course I wil have to change that in order to be able to animate him.
  20. OK Well, he's not exactly cute or endearing yet, I think the pupils are too tiny..... And I still have a few things to add. I think I will just give him paddle feet, or modify the hands and make feet out of those. I've made horns, I just didn't bother to put them on. I'll be putting some decals on him at some point, nothing too fancy just something to punch him up a bit. He'll still be clay shaded. One thing I am not entirely happy with is the snout....this one is true to my original sketches, I didn't want to have a beak or anything with teeth, like an alligator or t-rex. I guess I could give him like a little anteater mouth with a tounge that flops out and one or 2 teeth. I didn't pay a lot of attention to the mouth as I don't intend to have him lip sync anything, just maybe sniffle and snort. thoughts?[attachmentid=18253]
  21. EXACTLY on the y axis? Jebus. OK, I'll try that. Also, is that a shift left-click or shift right click? I guess I'll try both and find out. Thanks for the prompt response. Roger Ok, I moved it onto the y axis. The first time after that I shift left clicked on one of the splines, then right clicked inside the bounding box of the group selection and hit CFA. It worked, only the wrong way. Instead of taking to body halves and joining them, it created another half body and joined it at the neck. So, it was mirrored the wrong way. Not sure what I did there. I tried again but now I get what I was getting before, mirrors correctly but doesn't attach. Do I need to move the pivot point at all?
  22. OK sorry to be a pest.... I read the help file on this, I followed the directions but there must be something I'm missing because while I am getting the mirroed part that I want, it is not attaching. I am working in front view, its mirroring along the y-axis properly, but does not attach. I am grouping the left half of the body, then right click, choose CFA, and I get the mirrored part but it doesn't attach. Any ideas what I am doing wrong? Do I have to move the pivot? thanks in advance Roger
  23. Martin and gang---- I am not sure how difficult this would be to implement, but it would be kind of nice if there were a way to bookmark different entries within the help system, so that you can go back to them quickly. I am not a full-time user of AM, and if I don't do something a bunch of times I find myself having to go back to the help index or pester people on the board to find something. It would be nice to be able to personalize the help file, in order to keep entries on things that stump you handy. Just something I would find useful. If there is already a way to do this I'd love to know how. Thanks Roger
  24. Thanks......I'll give that a go. Should work fine. Appreciate the help. Roger
  25. During the creation of this beast, I did something that I do with other 3d programs.....I split the thing into separate projects, so each body part ( mostly) has a separate project file. Its just easier for me to work this way. However, I have come to the point where I want to start bringing these parts into the same project file, but I cannot seem to find a way to save the model out as a .mdl file from within the project----although there seems to be an option to import them from the File menu. So, if someone could give me the Saving and Importing .mdl files for Dummies version, I will post a picture of my dragon as he exists so far. I am sure its something obvious that I am missing, but I checked all the menu choices and I can't seem to find it. I don't think Consolidate Project is quite what I am looking for. Thanks Roger
×
×
  • Create New...