Jump to content
Hash, Inc. Forums

Leaderboard


Popular Content

Showing most liked content since 05/28/2016 in all areas

  1. 5 likes
    Installers: Windows 32Bit Windows 64Bit Intel Mac v19.0 Intel Mac SSE4.2 v19.0 SDK UpDate Change Log: Fixed All: 0006942 Audio in Chor doesn't play Fixed All: 0006941 Crash on Decal scaling New All: for chor new entry in the menu -> "Bake and Remove Bullet Constraints" bake simulation data and remove than the Bullet Constraints from the models If the Shift key is hold while clicking this entry, a simulation run is first done for all Bullet Constraints New All: for objects new entry in the menu -> "Reset Main Bone", set the main model bone back to the default values (helpfull for simulation with bullet constraint, if the main bone not at default , unexpected behavior can occur) Fixed All: 0006934 Bullet "Bounce" parameter has no effect Fixed All: 0006938 Bullet simulates with strange results Fixed All: 0006820 Specular highlights not working on transparent surface. Fixed All: 0006931 Magnet Mode distance handles disappear Fixed All: 0006935 Rotoscope disappears if resized Fixed All: 0006933 32 bit version crashes Fixed All: 0006928 AI-Wizard crashes A:M Fixed All: 0006932 Explode/Rebuild doesn't work Fixed All: 0006937 Crash on adding Null Fixed All: 0006936 Crash on Save Fixed All: 0006895 Depth of field doesn't work Fixed All: 006894 Scale keys lost after save Fixed All: 0006914 NetRender: Corrupted surface on first frames Fixed All: 0006927 Final render darker than previous versions Fixed All: 0006926 Decal Image name lost after adding non-loca material. Fixed All: 006921 Crash on dragging Groups in PWS Fixed All: 0006919 Crash after selecting CPs Fixed All: 0006912 Netrender: Can't expand "Time" Column Fixed All: 0006913 NetRender: Disabled slave Prgress precent freezes Fixed All: 0006925 endless loop for complex undoing operations Fixed All: 0006920 Pose slider made by Push_CPs doesn't work Fixed All: 0006855 Soft shadows not soft Fixed All: 0006917 Reordering Groups after making keyframes in Chor causes crash 11 Fixed All: 0006922 Substeps for frame render is always 0:0... Fixed All: 0006811 incorrect real-time and progressive renders on particle image sequences New All It's now possible to show in which group a cp is in.For existing installations the button needs to be add manually. Add the button Tools->Customize->Commands->Manipulator -> "Show Groups, where the CP is included" to the toolbar, or "Reset Toolbars" For new installations it's default in the manipulator toolbar. Works only for single selected cp's. OSX latest supported version is OSX 10.13.6, because my mac can't be updated to a newer OSX version
  2. 3 likes
    The library printed my Sphinx j model. Here are a few pictures. As you see, it still did not print perfectly, but I am happy with the result. Thanks again to everyone who helped. Your ideas, illustrations, and video clips really taught me a lot.
  3. 2 likes
    Rob your the best!!! I'll check these out. Rusty An ad for my scifi books I made in AM. ExplorerTwoAd.mp4
  4. 2 likes
    Hi Robcat, You have always been very helpful. It's too late for the contest, but it just so happens that my project involves a model of a plane.
  5. 2 likes
    I decided to hold off on the laptop, but have been working to install Windows on my Mac via Boot Camp today. A much easier process than the one I remember from the olden days (which involved burning an install disc and lots of hoops to jump through.) Everything seems to be fine, so far. I've set up a Dropbox folder that I can use to share files with my Mac and I think it'll be good for my productivity to have a kind of distraction free workspace when I'm working in A:M.
  6. 2 likes
    This question came up in Live Answer Time today and I thought I would post the official word from Hash (link is to store page): Can A:M use multiple cores? A:M is currently not fully multi-core-optimized. However A:M is able through Netrender (included for free in v16.0 and up) to use multiple cores for rendering.  OpenMP is used to utilize multiple cores for several operations. More operations are altered to use multiple cores in each update.  Since A:M is a rendering application, it is recommended to use a CPU as fast as possible to decrease rendering time. So if you have an 8 core system, base AM may not make full use of all 8 cores however if you pick up an additional 4 or 10 netrender nodes for the nominal cost of $10 or $15, you can utilize the other cores as background render nodes. So those of you contemplating Threadripper/Ryzen/Ryzen 3000 updates may find this useful info. *EDIT: I should add, most programs are not fully massively-threaded aware yet. I expect that to change over time, but for right now Netrender is the best way to make use of those extra cores.
  7. 2 likes
    A fine New Year to you all...
  8. 2 likes
    Hey everybody, I just wanted to wish you all a very Merry Christmas with a small little card created in A:M :). Best regards, have a nice celebration and keep on splining *Fuchur*
  9. 2 likes
    https://zandoriastudios.com/tutorials/uv-tutorial/
  10. 2 likes
    It took a ton of work, but it's done. A:M Stills is now here and almost all of the images where saved. I'm going to look in to if there is a way to users to 'claim' the image. But I have a lot of work before I can do that I think it will have to be done in the DATABASE it's self. But enjoy!!!!!!!!!!!!11 https://forums.hash.com/gallery/category/7-am-stills/
  11. 1 like

    © © webfeet media 2019

  12. 1 like
    I might be interested. It has been years since I've done any programming, but if it applies to computer graphics I'd be interested. I've actually been thinking about learning Python but C++ might be more relevant.
  13. 1 like
    Solution: Ok to everyone that helped with this problem. I got it fixed. I opened my MacKeeper/Default Apps/searched 'hxt'/ assigned AM to default app to open....BINGO! Checked it in every version ALL WORKING. So thank you to all of you for the help.
  14. 1 like
    Thanks! I feel like I really learned a lot by doing the project, and I appreciate the help all of you gave during the process. I hope that reading this thread will also help others who might want to try 3-D printing.
  15. 1 like
    Dual extruders are nice (my replicator 2x is one) but as interesting as dissolvable supports are, they only have advantages if you are not able to reach the supports (for instance they are inside of an object or they are very small. The problem with supports for FDM is, that both are melting and get mixed a little. And like that they are not totally separated and will leave small marks too. I would have to try it out again because the last time I did that is years ago (some software updates could make a difference here) but my first tries can be seen here: https://www.patchwork3d.de/blog-5-en/abs-u-pva-print-on-my-makerbot-replicator-2x-514 I tried to make my replicator 2x a all-rounder-machine (it is in general meant to print ABS, not like my replicator 2 PLA) and ABS has a lot of problems with shrinking. But for PLA (which has close to no shrinking problems) you need different cooling mechanisms. For that I have build additional cooling fans next to my nossle and stuff like that but I never got it perfectly to run till now (have to admit that I did not try it extensively...) so I use my replicator 2 for most prints just because it is very, very dependable. I can shut it off for half a year, come back to it then and it will print as if it was half an hour later... I really like it. The moment I activate my replicator 2x and print something else then ABS with it, I have to invest a lot of time. That is, why I tend to just model stuff the way I need it to avoid overhangs... like these minions for a wedding cake: https://www.patchwork3d.de/blog-5-en/minion-mariage-or-what-you-should-put-on-a-cake-part-1-731 https://www.patchwork3d.de/blog-5-en/minion-mariage-or-what-you-should-put-on-a-cake-part-2-732 (when I printed them I was in the middle of reassembling my printer with a new nozzle/print head so the quality suffered a bit because it was not really done till then, but it had to be done very fast because the wedding was close and it was still fun to do and they liked it a lot ) In the images attached you can see how I've split up the male minion model for printing it and then I just glued those together afterwards and painted them (and yes, I am really not talented with painting models as you may see ) Best regards *Fuchur*
  16. 1 like
    An alternative to the standard chor paths... We can also use any spline from any model in the chor as your path. Create a new (empty) model and drag/drop that into the chor. Draw a spline and edit that path as desired in the Chor. A reason I prefer modeled paths is that they can be considerably more complex than standard Chor paths. Under the hood Chor paths are just specialized models with limited parameters.
  17. 1 like
    Hit the "A" key and then draw your path. Hope that helps, Rusty. path_tool_example.mp4
  18. 1 like
  19. 1 like
    I just went to the store and selected Hash, Inc. Software (3). The center choice is the one I've always purchased.
  20. 1 like
    All it needed was the rotate offsets to be set to "0" on the BicepLeft bone's "Orient Like Control Bicept Hint Left" . Just turn off "Compensate Mode" when you apply that constraint. Hope that helps. Rig_update.prj
  21. 1 like
    There's a lunar eclipse going on now. Go out and look at the eclipse but remember to wear your moonglasses. https://www.timeanddate.com/eclipse/in/usa/dallas
  22. 1 like
    I am a bit rusty at splining but it all comes back. I don't want any compensation, AM community has been really good to me and it is a way I can try to return the favor. There is still a good amount of content that has been contributed already, anything there feel free to toss in the dvd. I don't know if other contributors feel the same but might be worth reaching out. It is a healthy start. For distribution, why not an iso on the company store?
  23. 1 like
    Back in 2004 A:M Justin Barrett created a video tutorial set on facial animation in A:M. He has now re-released it on Youtube for free! Check it out! Thanks, Justin! Animate a Face
  24. 1 like
    See if you can't view the author of a 'Like' now.
  25. 1 like
    Installers: Windows 32Bit Windows 64Bit Intel Mac v19.0 Intel Mac SSE4.2 v19.0 SDK UpDate Change Log: Breaking Change: sdk changed, external plugins must be recompiled Fixed All: 0006908: Layer are not visible in chor rendering with Render Lock Mode (green button) Fixed All: 0006899: View Undo, View Redo shortcuts not editable Fixed All: 0006906: Reordering Null in heirarchy causes crash Fixed All: 0006907: Adding one model to another model causes crash Fixed All: 0006904: Cloth object doublesizes and misses deflector objects Fixed All: 0006902: AppHang on Render Fixed All: 0006901: Five pointers and splines disappear Fixed All: 0006903: Duplicator wizard doesn't work. Fixed All: 0006900: Can't Undo after Lathe. Screen redraw stops working. Fixed All: 0006898: UV-Editor does not show any wireframes/CPs of mapped objects... Fixed All: 0006896: Distrotion box in Action causes crash Fixed All: 0006893: Multiple Models on Path not on path and wrong multiple For the second problem (does not insert choosen number of models) a new checkbox "Allow overlapping" is added , then the choosen number is always imported , otherwise a overlapping bbox check is done and this can reduce the number of imported models. Fixed All: 0006887: Pose Sliders do not show current value of Pose Fixed All: 0006888: Image sequence "Frame" settings are ignored Fixed All: 0006890: booleans broken in final render
  26. 1 like
    You probably have noticed that Z-buffered Kleig light soft shadows (most of what we use) are not rendering soft. Shadow cast on Ground Plane... However, it turns out that models can shadow themselves correctly. So... Use the Grid wizard to add a flat plane to your model and give it a bone that is independent from everything else in your model. In the Chor, constrain that bone to the Ground, then set the Ground to OFF. You can scale that bone to scale the plane to be as large as you need. Shadow cast on plane that is part of model... Of course this won't work when you have more than one model in a chor. For that, take your project to V18 and render there.
  27. 1 like
    Further dev on helmet hair with displacement map and "Westin" specular shader (lower right). The image map is Photoshop "noise" with a horizontal blur.
  28. 1 like
    Hi Edward! Mirror mode is for when you have made a model that is symmetrical on the X axis, like if you used Copy Flip Attach to make it. Turn this button on... and then when you move CPs on one side, the other side will move also.
  29. 1 like
    Hey Wally, This is a common glitch in the Mac version. The workaround is to switch to another app and then back to A:M. I use CMD-TAB to open the app switcher and I usually go to Mail, since it's usually open and seems to work every time. Once I'm in Mail, I do the same thing to go back to A:M and you'll find that it's not greyed out anymore. I almost do it out of second nature these days.
  30. 1 like
    YouTube it is. Here is the link: https://youtu.be/yLnrZywVnbA Sorry about the misfires... If anyone can provide a Mac-based workflow for reliably producing videos that will play in the forum -- much appreciated.
  31. 1 like
    Here is a movie of my Rhino-Beest model (so far). Looking at the video of Jansen's Rhinoceros, it appears that the six leg pairs (front + rear = pair) each have separate cycles. I decided to simplify the task of boning/constraining the model/action by making 3 pairs of bones/constraints and assigning CPs to leg bones so that the legs move symmetrically on either side of the model centerline. The action is driven by bones M1 through M6 which rotate around a common center and each move one of the leg mechanisms plus its respective CP doppelgänger. The walk cycle that seems to best resemble Jansen's Rhinoceros has pair M1-M2 (front-rear) set at 40 degrees apart, then an 80 degree gap followed by M3-M4, etc. Thanks again to Robert and Serge. Rhino-Beest-gait2.mov
  32. 1 like
  33. 1 like
    Robert, A brilliant solution and excellent explanation. For me, the key concept that I would never have arrived at is making bone F a child of bone B, without any intervening/connecting linkages. And your model and action are far simpler than my almost-works attempt. Simpler is always better in A:M world. Thank you. Joseph
  34. 1 like
    Here is a zip with the PRJ with the leg both the undone (01) and done (06) form if you want to try it as in the video. BeastLegPRJ.zip
  35. 1 like
    I've added the weekly 'Live Answer Time' to the Community calendar: https://forums.hash.com/index.php?/calendar/
  36. 1 like
    Hi Martin, Sorry, I know I'm 12 months late but....Welcome Back! I don't do much animation at home now. Doing animation all day every day in the games industry has greatly reduced my enthusiasm and stamina for that. However, I did use A:M for parts of a music video I did in spare time a couple of years ago. I do still love the software and feel nothing but excitement every time I think of it. I had one such flash of nostalgia just now and decided to look in on the forum again and saw your post. Fantastic! Dale
  37. 1 like
    I've just finished updating my website, focusing my freelance niche towards digital character modeling for animation, games, VR and for 3D printing statues, figurines and miniatures. http://www.zandoriastudios.com Feedback/critique welcome--I'm not a web designer, but I hope this looks a little more professional...
  38. 1 like
    Sorry- I've been away... I never had success in my searching for A:M models and animations to FBX file format.

Announcements

×
×
  • Create New...