Jump to content
Hash, Inc. Forums

Leaderboard


Popular Content

Showing most liked content since 07/03/2014 in all areas

  1. 5 likes
    Installers: Windows 32Bit Windows 64Bit Intel Mac v19.0 Intel Mac SSE4.2 v19.0 SDK UpDate Change Log: Fixed All: 0006942 Audio in Chor doesn't play Fixed All: 0006941 Crash on Decal scaling New All: for chor new entry in the menu -> "Bake and Remove Bullet Constraints" bake simulation data and remove than the Bullet Constraints from the models If the Shift key is hold while clicking this entry, a simulation run is first done for all Bullet Constraints New All: for objects new entry in the menu -> "Reset Main Bone", set the main model bone back to the default values (helpfull for simulation with bullet constraint, if the main bone not at default , unexpected behavior can occur) Fixed All: 0006934 Bullet "Bounce" parameter has no effect Fixed All: 0006938 Bullet simulates with strange results Fixed All: 0006820 Specular highlights not working on transparent surface. Fixed All: 0006931 Magnet Mode distance handles disappear Fixed All: 0006935 Rotoscope disappears if resized Fixed All: 0006933 32 bit version crashes Fixed All: 0006928 AI-Wizard crashes A:M Fixed All: 0006932 Explode/Rebuild doesn't work Fixed All: 0006937 Crash on adding Null Fixed All: 0006936 Crash on Save Fixed All: 0006895 Depth of field doesn't work Fixed All: 006894 Scale keys lost after save Fixed All: 0006914 NetRender: Corrupted surface on first frames Fixed All: 0006927 Final render darker than previous versions Fixed All: 0006926 Decal Image name lost after adding non-loca material. Fixed All: 006921 Crash on dragging Groups in PWS Fixed All: 0006919 Crash after selecting CPs Fixed All: 0006912 Netrender: Can't expand "Time" Column Fixed All: 0006913 NetRender: Disabled slave Prgress precent freezes Fixed All: 0006925 endless loop for complex undoing operations Fixed All: 0006920 Pose slider made by Push_CPs doesn't work Fixed All: 0006855 Soft shadows not soft Fixed All: 0006917 Reordering Groups after making keyframes in Chor causes crash 11 Fixed All: 0006922 Substeps for frame render is always 0:0... Fixed All: 0006811 incorrect real-time and progressive renders on particle image sequences New All It's now possible to show in which group a cp is in.For existing installations the button needs to be add manually. Add the button Tools->Customize->Commands->Manipulator -> "Show Groups, where the CP is included" to the toolbar, or "Reset Toolbars" For new installations it's default in the manipulator toolbar. Works only for single selected cp's. OSX latest supported version is OSX 10.13.6, because my mac can't be updated to a newer OSX version
  2. 3 likes
    The library printed my Sphinx j model. Here are a few pictures. As you see, it still did not print perfectly, but I am happy with the result. Thanks again to everyone who helped. Your ideas, illustrations, and video clips really taught me a lot.
  3. 2 likes
    Rob your the best!!! I'll check these out. Rusty An ad for my scifi books I made in AM. ExplorerTwoAd.mp4
  4. 2 likes
    Hi Robcat, You have always been very helpful. It's too late for the contest, but it just so happens that my project involves a model of a plane.
  5. 2 likes
    I decided to hold off on the laptop, but have been working to install Windows on my Mac via Boot Camp today. A much easier process than the one I remember from the olden days (which involved burning an install disc and lots of hoops to jump through.) Everything seems to be fine, so far. I've set up a Dropbox folder that I can use to share files with my Mac and I think it'll be good for my productivity to have a kind of distraction free workspace when I'm working in A:M.
  6. 2 likes
    This question came up in Live Answer Time today and I thought I would post the official word from Hash (link is to store page): Can A:M use multiple cores? A:M is currently not fully multi-core-optimized. However A:M is able through Netrender (included for free in v16.0 and up) to use multiple cores for rendering.  OpenMP is used to utilize multiple cores for several operations. More operations are altered to use multiple cores in each update.  Since A:M is a rendering application, it is recommended to use a CPU as fast as possible to decrease rendering time. So if you have an 8 core system, base AM may not make full use of all 8 cores however if you pick up an additional 4 or 10 netrender nodes for the nominal cost of $10 or $15, you can utilize the other cores as background render nodes. So those of you contemplating Threadripper/Ryzen/Ryzen 3000 updates may find this useful info. *EDIT: I should add, most programs are not fully massively-threaded aware yet. I expect that to change over time, but for right now Netrender is the best way to make use of those extra cores.
  7. 2 likes
    A fine New Year to you all...
  8. 2 likes
    Hey everybody, I just wanted to wish you all a very Merry Christmas with a small little card created in A:M :). Best regards, have a nice celebration and keep on splining *Fuchur*
  9. 2 likes
    https://zandoriastudios.com/tutorials/uv-tutorial/
  10. 2 likes
    It took a ton of work, but it's done. A:M Stills is now here and almost all of the images where saved. I'm going to look in to if there is a way to users to 'claim' the image. But I have a lot of work before I can do that I think it will have to be done in the DATABASE it's self. But enjoy!!!!!!!!!!!!11 https://forums.hash.com/gallery/category/7-am-stills/
  11. 1 like
    I can provide insight/guidance with c++ and development in general. Used to do a lot of web based apps in Microsoft visual studio and c++ before I started turning tricks for my current employer. If you've ever played in java then c++ will prove easy.
  12. 1 like
    I might be interested. It has been years since I've done any programming, but if it applies to computer graphics I'd be interested. I've actually been thinking about learning Python but C++ might be more relevant.
  13. 1 like
    Thanks! I feel like I really learned a lot by doing the project, and I appreciate the help all of you gave during the process. I hope that reading this thread will also help others who might want to try 3-D printing.
  14. 1 like
    Ah, that explains it :). SLS/powderbased printers are really very expensive... even the one developed by Form Labs at the moment is pretty much out of my league... and that one is very inexpensive in comparision. Just to have said it again: The quality of the molten medal is pretty amazing :). Thanks for the hard work on that it really shines happily on a prominent spot here :). Best regards *Fuchur*
  15. 1 like
    i printed it out again with supports enabled and a size of about 7 cm x 3.5 cm x 6.5 cm. It already looks promising. printed with 300 micron layerheight in black pla on my replicator 2. not perfekt but pretty ok already. As you can see we have supports at the front at the nose and the mask. i'll break them away and see how it behaves. best regards *Fuchur*
  16. 1 like
    Here is an example I did long ago that uses the path constraint to place bones along a spline. Then you just animate the points of the spline. TentacleSplineRingPath04.zip TentaclePathB.mp4
  17. 1 like
    I got the TSM2 spine that i was trying yesterday at LAT to behave. Basically this is animation of a pelvis bone and a torso bone to get the flips going, The interpolation of the IK spine isn't as smooth as I hoped so i will look into other solutions. ButterFlip_12.mp4
  18. 1 like
  19. 1 like
    Back in 2004 A:M Justin Barrett created a video tutorial set on facial animation in A:M. He has now re-released it on Youtube for free! Check it out! Thanks, Justin! Animate a Face
  20. 1 like
    This year is already full of surprises, the first one being pointed out by Robert: my account is still active! And on top of that, I somehow remembered the password! Thanks to Robert for being willing to start this thread on my behalf. I hope that Animate a Face will still prove useful to the community!
  21. 1 like
    See if you can't view the author of a 'Like' now.
  22. 1 like
    Further dev on helmet hair with displacement map and "Westin" specular shader (lower right). The image map is Photoshop "noise" with a horizontal blur.
  23. 1 like
  24. 1 like
    and https://invisioncommunity.com/news/product-updates/44-animated-gifs-r1102/
  25. 1 like
    Hi Edward! Mirror mode is for when you have made a model that is symmetrical on the X axis, like if you used Copy Flip Attach to make it. Turn this button on... and then when you move CPs on one side, the other side will move also.
  26. 1 like
    How exactly the mechanism works for you, Holman! It is wonderful!
  27. 1 like
    I don't understand that story but the mention of the word gives me an opportunity to show my 4-door batmobile.
  28. 1 like
  29. 1 like
    Hi Martin, Sorry, I know I'm 12 months late but....Welcome Back! I don't do much animation at home now. Doing animation all day every day in the games industry has greatly reduced my enthusiasm and stamina for that. However, I did use A:M for parts of a music video I did in spare time a couple of years ago. I do still love the software and feel nothing but excitement every time I think of it. I had one such flash of nostalgia just now and decided to look in on the forum again and saw your post. Fantastic! Dale
  30. 1 like
    Sorry- I've been away... I never had success in my searching for A:M models and animations to FBX file format.
  31. 1 like
    Work-around Explained Problem: A Microsoft update for Windows versions 8.1 and earlier (KB3086255, released in September 2015) disables the secdrv.sys file that enabled copy protection like that used by CDROM-keyed versions of A:M (v14 and earlier). With the file disabled, the CDROM verification gets stuck and A:M is never run. Microsoft felt the file had become a security flaw. The copy protection software that uses that file was not written by Hash, Inc. Hash only licensed the software and won't have access to the code to update it or fix the security flaw. Solution: The best solution is to update to the current version of A:M that doesn't use the CDROM copy protection. Current versions of A:M are much faster, more stable and incorporate new features. However, in rare cases, it may be necessary to revisit old projects in the version they were authored in. If you need to run one of those past versions of A:M in Windows 8.1 or earlier, it is possible to re-enable the secdrv.sys file and permit a CD ROM version of A:M to run in Windows 8.1 and earlier. This Microsoft Bulletin explains DOS-Style commands that can typed in to enable and disable the secdrv.sys file as needed. I was not able to get them to work on my computer, possibly because of "path" confusion. The bulletin also explains a registry modification that performs the same enabling/disabling. That procedure does work on my PC. Microsoft warns that enabling this file is unwise and Hash, Inc. is not recommending you do this. I am not recommending it either. To minimize your risk, enable it only before starting A:M and disable it when done with A:M and disconnect your PC from your internet/network for the duration of that session. On my PC, a restart is required before the registry enabling takes effect and another restart for disabling to take effect. What about Windows 10? There is no published solution from Microsoft for Windows 10. If anyone finds one, let us know. Another version of the How-to-Geek article hints at using a virtual machine of an older Win under Windows 10. I have not tried this. Run as Administrator? Another problem mentioned above was that the CD ROM versions of A:M would fail to start and give an error message that they must be run by an administrator even if the user was logged into their PC as an administrator. Individual programs can be set to automatically run as if by an administrator. on the program's icon, choose Properties, select the Compatibility tab and under "Privilege Level" check "Run this program as an administrator".

Announcements

×
×
  • Create New...